aboutsummaryrefslogtreecommitdiff
path: root/nitrocli/CHANGELOG.md
Commit message (Collapse)AuthorAge
* Add support for changing read-write mode of unencrypted volumeDaniel Mueller2019-06-08
| | | | | | | This change adds support for changing the read-write mode of the unencrypted volume. To do so, we introduce a new top-level command, unencrypted, with a new subcommand, set, that accepts the new mode of the volume.
* Remove deprecated --ascii option of otp set subcommandDaniel Mueller2019-05-27
| | | | | | | The --ascii option of the otp set subcommand has been deprecated a while in favor of --format. As the next release is slated to be a major one breaking backwards compatibility, this change removes this option for good.
* Rename storage command to encryptedDaniel Mueller2019-05-27
| | | | | | | | This change is the last step in the process of restructuring the storage command. In particular, now that functionality pertaining hidden volumes has been moved out into a dedicated top-level command, it renames said command to encrypted, because dealing with the encrypted volume is the only functionality it provides.
* Make storage hidden subcommand a top-level commandDaniel Mueller2019-05-27
| | | | | | This patch marks the next step in the process of restructuring the storage command. Specifically, it promotes the storage hidden subcommand to a top-level command, hidden.
* Move storage status subcommand into status commandDaniel Mueller2019-05-27
| | | | | | | | In an attempt to rework the structure of the storage command to better accommodate future requirements for allowing to change the read-write state of the unencrypted volume (as well as potentially the encrypted one), this change removes the storage status subcommand and merges its output into the storage command.
* Bump version to 0.2.4Daniel Mueller2019-06-01
| | | | | | | | | | | | | | This change bumps the version of the crate to 0.2.4. The following notable changes have been made since 0.2.3: - Added the reset command to perform a factory reset - Added the -V/--version option to print the program's version - Check the status of a PWS slot before accessing it in pws get - Added NITROCLI_NO_CACHE environment variable to bypass caching of secrets - Clear cached PIN entry as part of pin set command to prevent spurious authentication failures - Bumped libc dependency to 0.2.57 - Bumped cc dependency to 1.0.37
* Update libc crate to 0.2.57Daniel Mueller2019-06-01
| | | | | | This change updates the libc crate to version 0.2.57. Import subrepo libc/:libc at cdc48ea36d8d2890dba38e8f779001e6855339a2
* Clear cached PIN entry as part of pin set commandDaniel Mueller2019-06-01
| | | | | | | | | | When a PIN is changed using the pin set command, the last action is to confirm the operation with the previously used PIN. This step will cause this PIN, which is now stale and no longer valid, to be cached, which in turn can cause follow up command using the same PIN type to use this wrong cached entry for authentication. To fix this problem, this change explicitly clear the PIN entry from the cache after the PIN has been changed.
* Allow for disabling of secret cachingDaniel Mueller2019-05-27
| | | | | | | | | | | | So far we have cached secrets in gpg-agent(1) whenever that made sense to do (i.e., for the two PINs in most contexts but not for passwords). While there is reason to believe that such caching is desired by the majority of users, not everybody has a use for it. To give users an opportunity to opt out of such caching, this change introduces a new environment variable, NITROCLI_NO_CACHE, that, when present in the environment, instructs the program to bypass the cache for all operations that require a secret and to instead inquire such secrets each time they are needed.
* Update cc crate to 1.0.37Daniel Mueller2019-05-24
| | | | | | This change updates the cc crate to version 1.0.37. Import subrepo cc/:cc at cbf6d2f1312b6be22a7a363cf5c2a02acabc531f
* Update libc crate to 0.2.55Daniel Mueller2019-05-24
| | | | | | This change updates the libc crate to version 0.2.55. Import subrepo libc/:libc at caf17a0641d29dc624621177f5756804dd180c13
* Update libc crate to 0.2.48Daniel Mueller2019-01-29
| | | | | | This change updates the libc crate to version 0.2.48. Import subrepo libc/:libc at 42cd3ba27254c423e03f6f4324de57075047f6a0
* Check slot status before accessing the PWSRobin Krahl2019-01-26
| | | | | | | | | | | | The Nitrokey devices do not check whether a PWS slot is programmed before accessing it (upstream issues [0] [1]). Until this is fixed in the firmware, we have to manually check the slot status in pws get. This could have been done in libnitrokey or the nitrokey crate, yet this would lead to unnecessary commands if we check multiple fields of a slot at the same time. [0] https://github.com/Nitrokey/nitrokey-pro-firmware/issues/56 [1] https://github.com/Nitrokey/nitrokey-storage-firmware/issues/81
* Add the reset command to perform a factory resetRobin Krahl2019-01-26
| | | | | | After performing the factory reset, we also build the AES key so that the device is fully usable. Due to timing issue, we have to add a delay between the factory reset and building the AES key.
* Add the -V/--version optionRobin Krahl2019-01-26
| | | | | | | | The -V/--version option prints the nitrocli version to stdout and exits. In the future, it should also print the used libnitrokey version, but as the required function is only available with nitrokey 0.3.2 and as the current interface does not reflect the latest change in version naming, I skipped that in this patch.
* Bump version to 0.2.3Daniel Mueller2019-01-26
| | | | | | | | | | | | | | This change bumps the version of the crate to 0.2.3. The following notable changes have been made since 0.2.2: - Added the storage hidden subcommand for working with hidden volumes - Store cached PINs on a per-device basis to better support multi-device scenarios - Further decreased binary size by using system allocator - Bumped nitrokey dependency to 0.3.4 - Bumped rand dependency to 0.6.4 - Removed rustc_version, semver, and semver-parser dependencies - Bumped nitrokey-sys dependency to 3.4.3 - Bumped libc dependency to 0.2.47
* Update libc crate to 0.2.47Daniel Mueller2019-01-22
| | | | | | This change updates the libc crate to version 0.2.47. Import subrepo libc/:libc at ce1dfcbf81bd74662b5cd02a9214818a0bfbbffa
* Update nitrokey crate to 0.3.4Daniel Mueller2019-01-22
| | | | | | This change updates the nitrokey crate to version 0.3.4. Import subrepo nitrokey/:nitrokey at 41cdc1f7091a3c442241dbb2379c50dbcc7e9c5f
* Document hidden volumes in the README and the manual pageDaniel Mueller2019-01-20
| | | | | | This change updates the README and the man page with documentation about hidden volumes in general and the storage hidden subcommand in particular.
* Remove no longer required dependenciesDaniel Mueller2019-01-16
| | | | | | | | | | With the update to rand 0.6.4 we no longer require the dependencies to rustc_version, semver, and semver-parser. Hence, this change removes them. Delete subrepo rustc_version/:rustc_version Delete subrepo semver/:semver Delete subrepo semver-parser/:semver-parser
* Update nitrokey crate to 0.3.3Daniel Mueller2019-01-16
| | | | | | | | | | | This change updates the nitrokey crate to version 0.3.3. Along with that change we update rand to 0.6.4 because rand 0.6.1 does not yet contain a publicly accessible rand_os. Note that we no longer require all crates in rand's workspace, but only rand_os and rand_core, which is a significant reduction in the number of lines of code compiled. Import subrepo nitrokey/:nitrokey at 7cf747d56ddc0b7eeedc3caf36dcc909907a171c Import subrepo rand/:rand at 4336232dda03323634b10ec72ddf27914aebc3a2
* Update libc crate to 0.2.46Daniel Mueller2019-01-14
| | | | | | This change updates the libc crate to version 0.2.46. Import subrepo libc/:libc at a9e3cc6c1b529eaffef5b82934d0c47203edebe5
* Update nitrokey crate to 0.3.2Daniel Mueller2019-01-12
| | | | | | This change updates the nitrokey crate to version 0.3.2. Import subrepo nitrokey/:nitrokey at 6ea73f29daa5db0215663a0a38334b764863671d
* Update nitrokey-sys crate to 3.4.3Daniel Mueller2019-01-12
| | | | | | This change updates the nitrokey-sys crate to version 3.4.3. Import subrepo nitrokey-sys/:nitrokey-sys at fe86df47853718983e1f45d6a4289a1d93ace45c
* Isolate cached PINs for multiple devices from each otherDaniel Mueller2019-01-11
| | | | | | | | | | | | | | | | | | | The application supports multiple devices both plugged in at the same time as well as when used after the other. However, the GPG cache ID we use for storing and retrieving the respective PIN is effectively a constant. This constraint can cause problems when devices have different PINs, as the PIN of a previously plugged in device may be reused for an operation on a different one. To resolve this problem this change adds the respective device's model and serial number to the cache ID. As each serial number is supposed to be different, this will ensure that the correct PIN is used for each device. With this change we also show the model and serial number of the currently used device in the pinentry dialog. Note that because we do not store the serial numbers of all previously plugged in devices, the pin clear command will only clear the PIN for the currently plugged in device. If a user wants to make sure that a cached PIN is cleared, the pin clear command should be invoked before unplugging the device.
* Switch to using the system allocatorDaniel Mueller2019-01-07
| | | | | | | | | | | | | | | | | | In the past we have already taken a couple of steps to reduce the size of the final binary, arguing that binary size is the metric of most relevance for the program at hand: - the memory footprint is close to irrelevant because the program does not stay resident in memory for long - execution speed is likely dominated by communication with the Nitrokey itself, which is a slow I/O device With that in mind, this change decreases the binary size further by swapping the default allocator we use (typically jemalloc) with the system allocator (which is malloc based on Unix systems). Given that we are by no means allocation sensitive, there is no point in wasting binary size on something that adds no value. This change decreases the binary size by another 324 KiB (for an already stripped release mode binary).
* Bump version to 0.2.2Daniel Mueller2019-01-13
| | | | | | | | | | | | | | | | This change bumps the version of the crate to 0.2.2. The following notable changes have been made since 0.2.1: - Added the -v/--verbose option to control libnitrokey log level - Added the -m/--model option to restrict connections to a device model - Added the -f/--format option for the otp set subcommand to choose the secret format - Deprecated the --ascii option - Honor NITROCLI_ADMIN_PIN and NITROCLI_USER_PIN as well as NITROCLI_NEW_ADMIN_PIN and NITROCLI_NEW_USER_PIN environment variables for non-interactive PIN supply - Format nitrokey reported errors in more user-friendly format - Bumped nitrokey dependency to 0.3.1
* Honor context provided Admin & User PIN in pin commandsDaniel Mueller2019-01-09
| | | | | | | | | | | The second source of interactivity comes from the pin set and pin unblock commands, which also inquire with the pinentry module to ask the user for a PIN. This change adjusts the two commands to honor the PINs as available in the command execution context. It also updates the documentation to reflect the availability of the newly introduced and honored environment variables NITROCLI_ADMIN_PIN & NITROCLI_USER_PIN as well as NITROCLI_NEW_ADMIN_PIN & NITROCLI_NEW_USER_PIN.
* Show fmt::Display formatted errors instead of fmt::Debug onesDaniel Mueller2019-01-08
| | | | | | | | | At some point in the past nitrokey::CommandError was lacking an implementation of the fmt::Display trait. Hence, we fell back to printing these errors in debug format. Since version 0.2.0 of the crate fmt::Display is implemented for these errors. With this change we use it to report more user-friendly error messages.
* Update nitrokey crate to 0.3.1Daniel Mueller2019-01-09
| | | | | | This change updates the nitrokey crate to version 0.3.1. Import subrepo nitrokey/:nitrokey at bad12ad3c57c67d42243338af7d65c3591fed327
* Add the --format option to otp set to select the secret formatRobin Krahl2019-01-13
| | | | | | | | | | | | | | This patch introduces the -f/--format options for the otp set subcommand to specify the format of the OTP secret. Previously, the default format was hexadecimal and ASCII format could be selected using the --ascii option. The new --format option takes the argument hex or ascii, defaulting to hex, and replaces the --ascii option. This patch does not remove the --ascii option but marks it as deprecated. It may not be set together with --format, and a warning is printed if it is set. It should be deleted with the next minor release. This patch prepares the addition of a new format, base32.
* Update nitrokey crate to 0.3.0Daniel Mueller2019-01-05
| | | | | | This change updates the nitrokey crate to version 0.3.0. Import subrepo nitrokey/:nitrokey at 3593df8844b80741e2d33c8e5af80e65760dc058
* Add the --model option to restrict the device model to connect toRobin Krahl2019-01-13
| | | | | | | | | | | | This patch adds the -m/--model option that can be used to restrict the device model to connect to. Per default, nitrocli connects to any available Nitrokey device. If this new option is set, it will instead only connect to devices of the given Nitrokey model. We introduce a new struct DeviceModel instead of using nitrokey::DeviceModel to make sure that the command-line options are parsed properly. On the long term, we should add a connect_model function to the nitrokey crate to make the connection code easier.
* Introduce -v/--verbose optionDaniel Mueller2019-01-04
| | | | | | | | | | | | | | | | This change introduces a new option, -v/--verbose, that can be used to increase the log level of libnitrokey. The option can be supplied multiple times, with each occurrence increasing the verbosity of the logging. On the implementation side, the option is set as part of connecting the device (piggy-backing on the previously introduced command execution context), although it describes global state that strictly speaking could be set anywhere. It is bad enough that libnitrokey just prints log messages to stderr (and does not accept a file handle) and that it does not track the log level on a per-device basis, but we don't want setting of global state from arbitrary locations inside the program. Instead, let's do that along with what pretty much is the first call into libnitrokey anyway: the connection to the device.
* Bump version to 0.2.1Daniel Mueller2019-01-07
| | | | | | | | | | | | | This change bumps the version of the crate to 0.2.1. The following notable changes have been made since 0.2.0: - Added the pws command for accessing the password safe - Added the lock command for locking the Nitrokey device - Adjust release build compile options to optimize binary for size - Bumped nitrokey dependency to 0.2.3 - Bumped rand dependency to 0.6.1 - Added rustc_version version 0.2.3, semver version 0.9.0, and semver-parser version 0.7.0 as indirect dependencies - Bumped cc dependency to 1.0.28
* Update nitrokey crate to 0.2.3Daniel Mueller2019-01-02
| | | | | | | | | | | | This change updates the nitrokey crate to version 0.2.3. This version bumps the rand crate used to 0.6.1, which in turn requires an additional set of dependencies. Import subrepo nitrokey/:nitrokey at b3e2adc5bb1300441ca74cc7672617c042f3ea31 Import subrepo rand/:rand at 73613ff903512e9503e41cc8ba9eae76269dc598 Import subrepo rustc_version/:rustc_version at 0294f2ba2018bf7be672abd53db351ce5055fa02 Import subrepo semver-parser/:semver-parser at 750da9b11a04125231b1fb293866ca036845acee Import subrepo semver/:semver at 5eb6db94fa03f4d5c64a625a56188f496be47598
* Update cc crate to 1.0.28Daniel Mueller2019-01-01
| | | | | | This change updates the cc crate to version 1.0.28. Import subrepo cc/:cc at 9490b5ecb43b8b926f96a7e484fa83e39620d8e5
* Enable LTO and more optimizations for release buildsDaniel Mueller2018-12-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The program's binary is more than 1,5 MiB in size (after stripping debug symbols). Although in general that is not a size to worry about, keeping a small binary and memory footprint is beneficial in the majority of cases and leaves a tangentially better impression with users. To that end, this change enables the following optimizations to be performed when creating a release build: 1) We compile with optimization for code size. We have no performance sensitive code and are communicating with a slow I/O device to begin with, meaning that binary size will ultimately have the most weight when judging the program. Hence, minimizing it seems like the best trade-off. 2) We enable link-time optimization (LTO). At the expense of compilation time (which is not a concern for what may almost be considered a one-off operation), this step can reduce binary size by eliminating more unused code as well as enable performance related optimizations not possible without this setting. For similar reasons we disable incremental builds and treat the entire compilation as one unit. The end result of these optimizations is a reduction of binary size by almost a fourth (420 KiB). Those optimizations come at little to no cost (depending on one's view). There is another one that we could enable and that is to abort on panics instead of unwinding, yielding savings of 44 KiB. However, we refrained from doing so because that has a negative impact on the amount of error reporting happening in case of a panic.
* Implement the lock commandRobin Krahl2019-01-07
| | | | | | This patch implements the lock command that locks the password safe and, on the Nitrokey Storage, the encrypted volume. See issue #18 for details on the locking mechanism.
* Implement the pws commandRobin Krahl2019-01-07
| | | | | This patch adds the basic structure for the pws command that can be used to access the password safe on the Nitrokey Pro and Nitrokey Storage.
* Bump version to 0.2.0Daniel Mueller2019-01-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change bumps the version of the crate to 0.2.0. The following notable changes have been made since 0.1.3: - Use the nitrokey crate for the 'open', 'close', and 'status' commands instead of directly communicating with the Nitrokey device - Added nitrokey version 0.2.1 as a direct dependency and nitrokey-sys version 3.4.1 as well as rand version 0.4.3 as indirect dependencies - Removed the hid, hidapi-sys and pkg-config dependencies - Added the 'otp' command for working with one-time passwords - Added the 'config' command for reading and writing the device configuration - Added the 'pin' command for managing PINs - Renamed the 'clear' command to 'pin clear' - Moved 'open' and 'close' commands as subcommands into newly introduced 'storage' command - Moved printing of storage related information from 'status' command into new 'storage status' subcommand - Made 'status' command work with Nitrokey Pro devices - Enabled CI pipeline comprising code style conformance checks, linting, and building of the project - Added badges indicating pipeline status, current crates.io published version of the crate, and minimum version of rustc required - Fixed wrong messages in the pinentry dialog that were caused by unescaped spaces in a string - Use the argparse crate to parse the command-line arguments - Added argparse dependency in version 0.2.2
* Implement the pin command and rename clear to pin clearRobin Krahl2019-01-01
| | | | | | | | | We have functionality for changing the Nitrokey's user & admin PINs as well as for resetting the user PIN coming up. With the prospect of this new functionality arriving, it makes sense to introduce a new top-level command for the sole purpose of PIN management. This change introduces such a command, pin, and moves the existing clear command for clearing the PIN cache into it.
* Move printing of storage related status into 'storage status' sub-commandDaniel Mueller2018-12-28
| | | | | | | | | | The 'status' command has traditionally printed information about the connected Nitrokey and that included storage specific data if the device present is a Nitrokey Storage. Given that we have a root-level 'storage' command it arguably makes sense to move the printing of the storage related status information into a 'status' sub-command of the said command, which makes the output more predictable.
* Make 'open' and 'close' subcommands of new 'storage' commandDaniel Mueller2018-12-27
| | | | | | | | | | | | | Upon their inception, the 'open' and 'close' commands were pretty much the only relevant commands the program provided and it made sense to have them reside in the root namespace. By now we support more commands and have started to structure them in a more hierarchical fashion. To go with the flow, this change introduces a new 'storage' command and makes the existing 'open' and 'close' commands subcommands of it. We chose the name 'storage' (over, say, 'volume') because we plan to move the printing of the storage related status from the 'status' root level command into a subcommand within 'storage'.
* Implement the config commandRobin Krahl2018-12-27
| | | | | This patch adds the top-level config command. Its subcommands will provide access to the device configuration.
* Add status output for Nitrokey ProRobin Krahl2018-12-27
| | | | | | | | Currently, the status command fails for a Nitrokey Pro. This patch changes the command to also print basic status information for Pro devices. For the sake of consistency, the common status is always queried using the common `Device` functions, even if the Storage status includes the same information.
* Implement otp commandRobin Krahl2018-12-24
| | | | | This patch adds the `otp` top-level command. Its subcommands provide access to one-time passwords on the Nitrokey.
* Port argument handling to argparseRobin Krahl2018-12-23
| | | | | | | | | This patch replaces the macro for argument parsing with `argparse::ArgumentParser` from the argparse crate. It moves the application logic to the `commands` module and the argument parsing to the `options` module. An enum is used to represent the available commands. The code is based on the `subcommands.rs` example shipped with argparse.
* Add argparse 0.2.2 as a dependencyRobin Krahl2018-12-21
| | | | | | | | | This patch adds the crate rust-argparse [0] in version 0.2.2 as a dependency, as discussed in issue #4. [0] https://github.com/tailhook/rust-argparse Import subrepo argparse/:argparse at 0de60a5e6d9ee1a3570d6089afd3ccd6ed7480c5
* pinentry: Encode spaces in prompt argumentRobin Krahl2018-12-19
| | | | | | | Spaces in the arguments for gpg-connect-agent’s `GET_PASSPHRASE` command have to be esaced using a plus sign. Somehow this was missing for the prompt argument. This patch adds escaping for the prompt so that the pinentry dialog is displayed correctly.
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-20 10:48:10 +0000