aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* Make hidden lifetime parameters explicitDaniel Mueller2018-12-10
| | | | | | | | | | | | | With a recent Rust version upgrade hidden lifetime parameters cause a warning of the form: > warning: hidden lifetime parameters in types are deprecated > --> src/error.rs:58:25 > | > 58 | fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { > | ^^^^^^^^^^^^^^- help: indicate the anonymous lifetime: `<'_>` This change adjusts the code to make those lifetimes explicit (while keeping them anonymous).
* Enable rust_2018_idioms lintDaniel Mueller2018-12-10
| | | | | | | | This change enables the rust_2018_idioms lint which helps enforce the usage of Rust 2018 code idioms. A while back the "impl trait" feature stabilized and along with it trait objects are supposed to be prefixed with "dyn". This change adjusts the code accordingly.
* Enable rust_2018_compatibility lintDaniel Mueller2018-12-10
| | | | | | | | In preparation for the switch to using Rust 2018, this change enables the rust_2018_compatibility lint. Along with that enablement we fix the warnings emitted by it, which evolve around the module system changes Rust has gone through and that require us to prefix initial uses of crate local modules with "crate".
* Add change log detailing the changes between releasesDaniel Mueller2018-12-11
| | | | | | | | | | In order for users to decide whether an update of the program is justified (or, to potentially help in identifying changes that resulted in a regression), it is often a good idea to provide a brief summary of all the changes that went into a particular release. With this change we add a change log for the program to the repository. Through a bit of code archeology the log stretches back to the initial release.
* Add doc comment to pinentry::inquire_passphraseRobin Krahl2018-12-11
|
* Add support for multiple PIN typesRobin Krahl2018-12-11
| | | | | | | | Currently, the pinentry module only supports querying the user PIN. The Nitrokey devices also have an admin PIN. This patch adds support for querying multiple PIN types to the pinentry module. While this is currently not used, it will be needed to add support for administrative commands like unlocking the device or changeing the user PIN.
* Show error in pinentry dialog instead of printing to stdoutRobin Krahl2018-12-11
| | | | | | | | | Currently, the error message for a wrong password is printed to the standard output. Yet the standard output might not be visible to the user if they are using the curses frontend for pinentry. Pinentry already supports displaying an error message in the passphrase prompt. This patch moves the error message from the standard output to the pinentry prompt.
* Rename pinentry constants to match the documented namesRobin Krahl2018-12-11
| | | | | | | | The GnuPG documentation [0] refers to the GET_PASSPHRASE arguments as “error message”, “prompt” and “description”. This patch changes the names of the constants for these arguments to match the documented names. [0] https://www.gnupg.org/documentation/manuals/gnupg/Agent-GET_005fPASSPHRASE.html#Agent-GET_005fPASSPHRASE
* Add application name and PIN type to the pinentry cache IDRobin Krahl2018-12-11
| | | | | | | | | | | | This patch adds the application name (nitrocli) and the type of the requested PIN (user PIN) to the cache ID user with pinentry to conform with the GnuPG documentation [0]: > By convention either the hexified fingerprint of the key shall be used > for cache_id or an arbitrary string prefixed with the name of the > calling application and a colon: Like gpg:somestring. [0] https://www.gnupg.org/documentation/manuals/gnupg/Agent-GET_005fPASSPHRASE.html#Agent-GET_005fPASSPHRASE
* Add rustfmt configurationRobin Krahl2018-12-11
| | | | | rustfmt uses four-space indentation per default. This patch adds a configuration file that sets the indentation with to two spaces.
* Update cc crate to 1.0.25Daniel Mueller2018-12-10
| | | | | | This change updates the cc crate to version 1.0.25. Import subrepo cc/:cc at fe0a7acb6d3e22e03bf83bcbf89367be888b5448
* Update libc crate to 0.2.45Daniel Mueller2018-12-10
| | | | | | This change updates the libc crate to version 0.2.45. Import subrepo libc/:libc at f5636fc618f8e16968b3178196d73c94ad9f7b05
* Update pkg-config crate to 0.3.14Daniel Mueller2018-12-10
| | | | | | This change updates the pkg-config crate to version 0.3.14. Import subrepo pkg-config/:pkg-config at f867f8be1babca4d6d9cddc92a817519ae845193
* Specify version requirements in a less strict mannerDaniel Mueller2018-12-10
| | | | | | | | | We try to adhere to the Semantic Versioning convention and expect dependent crates to do the same. So far we have been fairly strict in terms of the specific versions we consume, specifying the full version triple (x.y.z). This change loosens that stance by only specifying the minor version requirement of dependencies, not the patch level (i.e., x.y).
* Fix issues reported by clippyDaniel Mueller2018-02-18
| | | | | The clippy tool has a couple of suggestions on how to improve the code. This change applies them to the project's code base.
* Bump version to 0.1.2Daniel Mueller2018-01-15
|
* Delete subrepo gcc/:gccDaniel Mueller2018-01-15
|
* Update hidapi-sys crate to 0.1.4Daniel Mueller2018-01-15
| | | | | | | | | This change updates the hidapi-sys crate to version 0.1.4. In this version the cc crate (the stable and renamed version of the gcc crate) is used. Import subrepo hidapi-sys/:hidapi-sys at c01043da72c0cac898660017e4c4115278c14369 Import subrepo cc/:cc at 500c65b03775cecf55bd358e616963bc3222acca
* Update libc crate to 0.2.36Daniel Mueller2018-01-15
| | | | Import subrepo libc/:libc at 16a0f4a3d6c836f88f50c58f5d0a74a32cbf0193
* Update hid crate to 0.4.1Daniel Mueller2017-11-10
| | | | Import subrepo hid/:hid at 6dc63c8682bd2f027c0d3b4a004b097ca9ac49fa
* Import subrepo hidapi-sys/:hidapi-sys at ↵Daniel Mueller2017-09-16
| | | | aa6e4728e8b87ee3d6580f65826b5803801885c5
* Update libc crate to 0.2.30Daniel Mueller2017-09-16
| | | | Import subrepo libc/:libc at 3520512a8c9cb55661910318a6fb169a75c02a59
* Update gcc crate to 0.3.54Daniel Mueller2017-09-16
| | | | Import subrepo gcc/:gcc at dc329205d54b53a45ab66368aed265b68fe7f261
* Bump version to 0.1.1Daniel Mueller2017-08-17
|
* Remove workaround for incorrect CRC reportingDaniel Mueller2017-08-17
| | | | | | | | | | | In the past the Nitrokey Storage device reported wrong CRC values for certain commands, e.g., the closing of an encrypted volume. This problem was tracked by issue 32: Nitrokey/nitrokey-storage-firmware#32 Firmware version 0.47 includes a fix for the problem. With this change we remove the workaround for the incorrect CRC from nitrocli. By doing so, we require the Nitrokey Storage to be running firmware 0.47 or higher to be properly usable.
* Fix display of firmware versionDaniel Mueller2017-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nitrokey-storage-firmware package defines an array of four byte values to hold information about the firmware version. libnitrokey uses a similar definition but overlays it with some more semantically meaningful information by putting it into a union: union { uint8_t VersionInfo_au8[4]; struct { uint8_t __unused; uint8_t major; uint8_t __unused2; uint8_t minor; } versionInfo; }; In order to derive the firmware version representation for nitrocli we used the same major/minor version definition as libnitrokey. This definition, however, is wrong or at least not in line with how the firmware is versioned officially. This change reworks the way we interpret the version information reported by the Nitrokey Storage device. Like the firmware, we treat the first byte as the major version and the second one as the minor version. The remaining two bytes seem to represent the build number and an internal version according to usage of those fields in nitrokey-storage-firmware but we ignore both to keep the reported string similar to that of the nitrokey-app.
* Explicitly mention versions for local dependenciesDaniel Mueller2017-05-29
| | | | | | | | Although the version information for all the local dependencies can be inferred from various locations, cargo requires an explicit mentioning of the version of each dependency for the 'package' command to be successful. This change adds explicit versions.
* Update libc crate to 0.2.23Daniel Mueller2017-05-29
| | | | | | | The 'libc' create got a couple of updates. This change imports the new code and bumps the version to use. Import subrepo libc/:libc at 7db3fd570dfb41a38fb17116e93679307178103a
* Update gcc crate to 0.3.48Daniel Mueller2017-05-29
| | | | | | | The 'gcc' create got a couple of updates. This change imports the new code and bumps the version to use. Import subrepo gcc/:gcc at 6b41873be3172415efcadbff1187a3ff42428943
* Flush filesystem caches before closing encrypted volumeDaniel Mueller2017-04-09
| | | | | | | | When closing the encrypted volume we could potentially cause the volume to be in an inconsistent state if writes to it were cached by the operating system. To mitigate this case this patch causes an invocation to the sync(2) system call to flush outstanding writes to disk.
* Wait until encrypted volume is opened/closedDaniel Mueller2017-04-09
| | | | | | | | | Until now we treated any response but "ok" and "idle" to the encrypted volume opening command as an error and reported it. However, the opening process is a potentially long running and it is very likely that the nitrokey reports a couple of "busy" messages. This change implements the logic to wait until the nitrokey either reports an error or a successful open.
* Add 'clear' commandDaniel Mueller2017-04-09
| | | | | | | | | | We currently unconditionally use gpg-agent to enter the PIN to use when opening the encrypted volume. The agent has the advantage of caching the password for us so that subsequent invocations against the same cache entry can be served without user interaction. For various reasons, however, it can be desirable to have the ability to remove this entry from the cache. This change introduces a new command 'clear' that achieves precisely this task.
* Detect wrong password during 'open' commandDaniel Mueller2017-04-09
| | | | | | | | | | When a wrong password is entered when attempting to open the encrypted volume the nitrokey will report that in the form of an error. In such a case we should retry the operation after asking the user for the corrected password. This change implements this logic. Note that because we use gpg-agent for the PIN inquiry and because it caches passwords by default we must make sure to clear the cache before retrying.
* Add 'status' commandDaniel Mueller2017-04-09
| | | | | | | | | | | The nitrokey supports a status command that instructs it to report details about itself. This data includes general useful information such as the current version of the firmware being installed along with more contextual bits such as the number of remaining retries for the user and admin PINs or whether the different volumes (unencrypted, encrypted, hidden) are writable. This change introduces the 'status' command line option that can be used to retrieve this information from the nitrokey and to display it.
* Do not check CRCDaniel Mueller2017-04-08
| | | | | | | | | | The nitrokey embeds a wrong CRC code into the response for certain commands. When closing the encrypted volume, for example, the CRC code never matches the actual report data. This problem is tracked by issue 32: https://github.com/Nitrokey/nitrokey-storage-firmware/issues/32 To work around this problem for now we unfortunately have to ignore the result of the CRC check. This change adjusts the code to do that.
* Introduce transmit function subsuming send and receiveDaniel Mueller2017-04-08
| | | | | | | | | The send a report, wait for some time, and receive a response pattern is used in many places already and more are to come. In fact, no send should ever happen without the wait for a response. To that end, this change introduces a new 'transmit' function that performs the exactly this task: send a report and return the response to it.
* Retry send/receive on failureDaniel Mueller2017-04-08
| | | | | | | | | | It is possible that sending or receiving a feature report fails. Such failures can have multiple reasons, including transient problems. In the case of such a transient failure we should retry the operation. This change accomplishes this feat by retrying a send in case of a failure up to a maximum of three times, with a small wait in between. It also introduces the logic or receiving a response (which is not yet evaluated fully).
* Receive command responsesDaniel Mueller2017-03-30
| | | | | | | | | By just sending a command to the nitrokey alone we have no idea of what actually happened on the side of the nitrokey. A command could simply be invalid in the current context or the stick could be busy or in a failure state. In order to determine the success of an operation, this change adds the logic to retrieve the response from the nitrokey as well.
* Use macros for generating commandsDaniel Mueller2017-03-29
| | | | | | | | Commands to the nitrokey all must follow a similar pattern in that they all require to have a constructor (i.e., a new() method) and need to implement the AsRef trait for byte slices. For we require more commands in the future, this change introduces macros that simplify creation of command objects.
* Send HID feature report to open/close the encrypted volumeDaniel Mueller2017-03-28
| | | | | | | With this change we assemble a HID feature report and send it to the nitrokey device. Feature reports are the objects used for sending commands to the nitrokey. We create two different reports for opening and closing of the encrypted volume.
* Update hid crate to version 0.4.0Daniel Mueller2017-03-27
| | | | | | | | The 'hid' crate got a couple of bug fixes, at least one of which we require in order to retrieve HID feature reports correctly. This patch imports the new state and bumps up the library version used. Import subrepo hid/:hid at 52b47d78c17b876194e4b4a1c0c8ae8adfb3d39c
* Add pinentry moduleDaniel Mueller2017-03-27
| | | | | | | | | | | | | | | | We do not want to roll our own infrastructure for entering a password (or PIN) securely, as there are existing providers of such functionality. gpg-agent, which uses pinentry for this very purpose, is such a program and we can safely assume to be present because we use it with the smartcard part of the nitrokey. This change introduces a new module, pinentry.rs, that provides the means to invoke gpg-agent to ask the user for a PIN and to parse the result. Using gpg-agent like this has two advantages that other solutions do not necessarily provide: first, because we use gpg-agent anyway it's pinentry configuration is as the user desires it and, hence, the integration appears seamless. And second, the agent caches pass phrases which alleviates the need for repeated entry should the credential be required again.
* Discover and open nictrokey using libhidapiDaniel Mueller2017-03-26
| | | | | | | | | | | This change uses the 'hid' crate to discover and open the Nitrokey Storage device. 'hid' is a wrapper around libhidapi (its libusb back-end in particular). Being a command line application some sort of parameter handling needs to happen. The approach we take is very simple for now to minimize the number of dependencies: we just compare the first argument against the expected ones and raise an error if no match was found. Because we only have positional arguments right now this is all we need.
* Import subrepo hid/:hid at 3ac1005fe3e874bef850ab733fe1a09bc36b91c5Daniel Mueller2017-03-26
|
* Import subrepo hidapi-sys/:hidapi-sys at ↵Daniel Mueller2017-03-26
| | | | ec441b2751dcbbcd053800b6901672c999651584
* Import subrepo libc/:libc at 05a2d197356ef253dfd985166576619ac9b6947fDaniel Mueller2017-03-26
|
* Import subrepo gcc/:gcc at cf1f00bc038a0df769e14bb85480ab9c12eae08dDaniel Mueller2017-03-26
|
* Import subrepo pkg-config/:pkg-config at ↵Daniel Mueller2017-03-26
| | | | a493b0d7c93df68c94d1bad2a1f419389e52c0f5
* Add basic scaffoldingDaniel Mueller2017-03-03
| | | | | | | | | This change adds the basic scaffolding for the nitrocli application. The scaffolding was created using the following command: $ cargo new --bin nitrocli The application aims at providing a command line interface for the Nitrokey Storage device.
* Create new repository for nitrocliDaniel Mueller2017-03-03
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-19 23:22:36 +0000