1 files changed, 127 insertions, 0 deletions
diff --git a/nitrokey/src/lib.rs b/nitrokey/src/lib.rs
new file mode 100644
index 0000000..e70aa73
--- /dev/null
+++ b/nitrokey/src/lib.rs
@@ -0,0 +1,127 @@
+//! Provides access to a Nitrokey device using the native libnitrokey API.
+//!
+//! # Usage
+//!
+//! Operations on the Nitrokey require different authentication levels.  Some operations can be
+//! performed without authentication, some require user access, and some require admin access.
+//! This is modelled using the types [`User`][] and [`Admin`][].
+//!
+//! Use [`connect`][] to connect to any Nitrokey device.  The method will return a
+//! [`DeviceWrapper`][] that abstracts over the supported Nitrokey devices.  You can also use
+//! [`Pro::connect`][] or [`Storage::connect`][] to connect to a specific device.
+//!
+//! You can then use [`authenticate_user`][] or [`authenticate_admin`][] to get an authenticated
+//! device that can perform operations that require authentication.  You can use [`device`][] to go
+//! back to the unauthenticated device.
+//!
+//! This makes sure that you can only execute a command if you have the required access rights.
+//! Otherwise, your code will not compile.  The only exception are the methods to generate one-time
+//! passwords – [`get_hotp_code`][] and [`get_totp_code`][].  Depending on the stick configuration,
+//! these operations are available without authentication or with user authentication.
+//!
+//! # Examples
+//!
+//! Connect to any Nitrokey and print its serial number:
+//!
+//! ```no_run
+//! use nitrokey::Device;
+//! # use nitrokey::CommandError;
+//!
+//! # fn try_main() -> Result<(), CommandError> {
+//! let device = nitrokey::connect()?;
+//! println!("{}", device.get_serial_number()?);
+//! #     Ok(())
+//! # }
+//! ```
+//!
+//! Configure an HOTP slot:
+//!
+//! ```no_run
+//! use nitrokey::{Authenticate, ConfigureOtp, OtpMode, OtpSlotData};
+//! # use nitrokey::CommandError;
+//!
+//! # fn try_main() -> Result<(), (CommandError)> {
+//! let device = nitrokey::connect()?;
+//! let slot_data = OtpSlotData::new(1, "test", "01234567890123456689", OtpMode::SixDigits);
+//! match device.authenticate_admin("12345678") {
+//!     Ok(admin) => {
+//!         match admin.write_hotp_slot(slot_data, 0) {
+//!             Ok(()) => println!("Successfully wrote slot."),
+//!             Err(err) => println!("Could not write slot: {}", err),
+//!         }
+//!     },
+//!     Err((_, err)) => println!("Could not authenticate as admin: {}", err),
+//! }
+//! #     Ok(())
+//! # }
+//! ```
+//!
+//! Generate an HOTP one-time password:
+//!
+//! ```no_run
+//! use nitrokey::{Device, GenerateOtp};
+//! # use nitrokey::CommandError;
+//!
+//! # fn try_main() -> Result<(), (CommandError)> {
+//! let device = nitrokey::connect()?;
+//! match device.get_hotp_code(1) {
+//!     Ok(code) => println!("Generated HOTP code: {}", code),
+//!     Err(err) => println!("Could not generate HOTP code: {}", err),
+//! }
+//! #     Ok(())
+//! # }
+//! ```
+//!
+//! [`authenticate_admin`]: trait.Authenticate.html#method.authenticate_admin
+//! [`authenticate_user`]: trait.Authenticate.html#method.authenticate_user
+//! [`connect`]: fn.connect.html
+//! [`Pro::connect`]: struct.Pro.html#fn.connect.html
+//! [`Storage::connect`]: struct.Storage.html#fn.connect.html
+//! [`device`]: struct.User.html#method.device
+//! [`get_hotp_code`]: trait.GenerateOtp.html#method.get_hotp_code
+//! [`get_totp_code`]: trait.GenerateOtp.html#method.get_totp_code
+//! [`Admin`]: struct.Admin.html
+//! [`DeviceWrapper`]: enum.DeviceWrapper.html
+//! [`User`]: struct.User.html
+
+extern crate libc;
+extern crate nitrokey_sys;
+extern crate rand;
+
+mod auth;
+mod config;
+mod device;
+mod otp;
+mod pws;
+#[cfg(test)]
+mod tests;
+mod util;
+
+pub use auth::{Admin, Authenticate, User};
+pub use config::Config;
+pub use device::{connect, Device, DeviceWrapper, Pro, Storage, StorageStatus, VolumeStatus};
+pub use otp::{ConfigureOtp, GenerateOtp, OtpMode, OtpSlotData};
+pub use pws::{GetPasswordSafe, PasswordSafe, SLOT_COUNT};
+pub use util::{CommandError, LogLevel};
+
+/// Enables or disables debug output.  Calling this method with `true` is equivalent to setting the
+/// log level to `Debug`; calling it with `false` is equivalent to the log level `Error` (see
+/// [`set_log_level`][]).
+///
+/// If debug output is enabled, detailed information about the communication with the Nitrokey
+/// device is printed to the standard output.
+///
+/// [`set_log_level`]: fn.set_log_level.html
+pub fn set_debug(state: bool) {
+    unsafe {
+        nitrokey_sys::NK_set_debug(state);
+    }
+}
+
+/// Sets the log level for libnitrokey.  All log messages are written to the standard error stream.
+/// Setting the log level enables all log messages on the same or on a higher log level.
+pub fn set_log_level(level: LogLevel) {
+    unsafe {
+        nitrokey_sys::NK_set_debug_level(level.into());
+    }
+}