aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/args.rs209
1 files changed, 40 insertions, 169 deletions
diff --git a/src/args.rs b/src/args.rs
index 305e433..e742f7c 100644
--- a/src/args.rs
+++ b/src/args.rs
@@ -111,16 +111,16 @@ impl From<DeviceModel> for nitrokey::Model {
/// A top-level command for nitrocli.
#[allow(unused_doc_comments)]
Command! {Command, [
- Config(ConfigArgs) => config,
- Encrypted(EncryptedArgs) => encrypted,
- Hidden(HiddenArgs) => hidden,
- Lock(LockArgs) => lock,
- Otp(OtpArgs) => otp,
- Pin(PinArgs) => pin,
- Pws(PwsArgs) => pws,
- Reset(ResetArgs) => reset,
- Status(StatusArgs) => status,
- Unencrypted(UnencryptedArgs) => unencrypted,
+ Config(ConfigArgs) => |ctx, args: ConfigArgs| args.subcmd.execute(ctx),
+ Encrypted(EncryptedArgs) => |ctx, args: EncryptedArgs| args.subcmd.execute(ctx),
+ Hidden(HiddenArgs) => |ctx, args: HiddenArgs| args.subcmd.execute(ctx),
+ Lock(LockArgs) => |ctx, _| commands::lock(ctx),
+ Otp(OtpArgs) => |ctx, args: OtpArgs| args.subcmd.execute(ctx),
+ Pin(PinArgs) => |ctx, args: PinArgs| args.subcmd.execute(ctx),
+ Pws(PwsArgs) => |ctx, args: PwsArgs| args.subcmd.execute(ctx),
+ Reset(ResetArgs) => |ctx, _| commands::reset(ctx),
+ Status(StatusArgs) => |ctx, _| commands::status(ctx),
+ Unencrypted(UnencryptedArgs) => |ctx, args: UnencryptedArgs| args.subcmd.execute(ctx),
]}
/// Reads or writes the device configuration
@@ -374,7 +374,7 @@ pub struct UnencryptedSetArgs {
}
Command! {ConfigCommand, [
- Get(ConfigGetArgs) => config_get,
+ Get(ConfigGetArgs) => |ctx, _| commands::config_get(ctx),
Set(ConfigSetArgs) => config_set,
]}
@@ -414,10 +414,14 @@ impl<T> ConfigOption<T> {
}
Command! {OtpCommand, [
- Clear(OtpClearArgs) => otp_clear,
- Get(OtpGetArgs) => otp_get,
+ Clear(OtpClearArgs) => |ctx, args: OtpClearArgs| {
+ commands::otp_clear(ctx, args.slot, args.algorithm)
+ },
+ Get(OtpGetArgs) => |ctx, args: OtpGetArgs| {
+ commands::otp_get(ctx, args.slot, args.algorithm, args.time)
+ },
Set(OtpSetArgs) => otp_set,
- Status(OtpStatusArgs) => otp_status,
+ Status(OtpStatusArgs) => |ctx, args: OtpStatusArgs| commands::otp_status(ctx, args.all),
]}
Enum! {OtpAlgorithm, [
@@ -446,30 +450,26 @@ Enum! {OtpSecretFormat, [
]}
Command! {PinCommand, [
- Clear(PinClearArgs) => pin_clear,
- Set(PinSetArgs) => pin_set,
- Unblock(PinUnblockArgs) => pin_unblock,
+ Clear(PinClearArgs) => |ctx, _| commands::pin_clear(ctx),
+ Set(PinSetArgs) => |ctx, args: PinSetArgs| commands::pin_set(ctx, args.pintype),
+ Unblock(PinUnblockArgs) => |ctx, _| commands::pin_unblock(ctx),
]}
Command! {PwsCommand, [
- Clear(PwsClearArgs) => pws_clear,
- Get(PwsGetArgs) => pws_get,
- Set(PwsSetArgs) => pws_set,
- Status(PwsStatusArgs) => pws_status,
+ Clear(PwsClearArgs) => |ctx, args: PwsClearArgs| commands::pws_clear(ctx, args.slot),
+ Get(PwsGetArgs) => |ctx, args: PwsGetArgs| {
+ commands::pws_get(ctx, args.slot, args.name, args.login, args.password, args.quiet)
+ },
+ Set(PwsSetArgs) => |ctx, args: PwsSetArgs| {
+ commands::pws_set(ctx, args.slot, &args.name, &args.login, &args.password)
+ },
+ Status(PwsStatusArgs) => |ctx, args: PwsStatusArgs| commands::pws_status(ctx, args.all),
]}
-/// Inquire the status of the Nitrokey.
-fn status(ctx: &mut ExecCtx<'_>, _args: StatusArgs) -> Result<()> {
- commands::status(ctx)
-}
-
-/// Perform a factory reset.
-fn reset(ctx: &mut ExecCtx<'_>, _args: ResetArgs) -> Result<()> {
- commands::reset(ctx)
-}
-
Command! {UnencryptedCommand, [
- Set(UnencryptedSetArgs) => unencrypted_set,
+ Set(UnencryptedSetArgs) => |ctx, args: UnencryptedSetArgs| {
+ commands::unencrypted_set(ctx, args.mode)
+ },
]}
Enum! {UnencryptedVolumeMode, [
@@ -477,70 +477,19 @@ Enum! {UnencryptedVolumeMode, [
ReadOnly => "read-only",
]}
-/// Execute an unencrypted subcommand.
-fn unencrypted(ctx: &mut ExecCtx<'_>, args: UnencryptedArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-/// Change the configuration of the unencrypted volume.
-fn unencrypted_set(ctx: &mut ExecCtx<'_>, args: UnencryptedSetArgs) -> Result<()> {
- commands::unencrypted_set(ctx, args.mode)
-}
-
Command! {EncryptedCommand, [
- Close(EncryptedCloseArgs) => encrypted_close,
- Open(EncryptedOpenArgs) => encrypted_open,
+ Close(EncryptedCloseArgs) => |ctx, _| commands::encrypted_close(ctx),
+ Open(EncryptedOpenArgs) => |ctx, _| commands::encrypted_open(ctx),
]}
-/// Execute an encrypted subcommand.
-fn encrypted(ctx: &mut ExecCtx<'_>, args: EncryptedArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-/// Open the encrypted volume on the Nitrokey.
-fn encrypted_open(ctx: &mut ExecCtx<'_>, _args: EncryptedOpenArgs) -> Result<()> {
- commands::encrypted_open(ctx)
-}
-
-/// Close the previously opened encrypted volume.
-fn encrypted_close(ctx: &mut ExecCtx<'_>, _args: EncryptedCloseArgs) -> Result<()> {
- commands::encrypted_close(ctx)
-}
-
Command! {HiddenCommand, [
- Close(HiddenCloseArgs) => hidden_close,
- Create(HiddenCreateArgs) => hidden_create,
- Open(HiddenOpenArgs) => hidden_open,
+ Close(HiddenCloseArgs) => |ctx, _| commands::hidden_close(ctx),
+ Create(HiddenCreateArgs) => |ctx, args: HiddenCreateArgs| {
+ commands::hidden_create(ctx, args.slot, args.start, args.end)
+ },
+ Open(HiddenOpenArgs) => |ctx, _| commands::hidden_open(ctx),
]}
-/// Execute a hidden subcommand.
-fn hidden(ctx: &mut ExecCtx<'_>, args: HiddenArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-fn hidden_create(ctx: &mut ExecCtx<'_>, args: HiddenCreateArgs) -> Result<()> {
- commands::hidden_create(ctx, args.slot, args.start, args.end)
-}
-
-fn hidden_open(ctx: &mut ExecCtx<'_>, _args: HiddenOpenArgs) -> Result<()> {
- commands::hidden_open(ctx)
-}
-
-fn hidden_close(ctx: &mut ExecCtx<'_>, _args: HiddenCloseArgs) -> Result<()> {
- commands::hidden_close(ctx)
-}
-
-/// Execute a config subcommand.
-fn config(ctx: &mut ExecCtx<'_>, args: ConfigArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-/// Read the Nitrokey configuration.
-fn config_get(ctx: &mut ExecCtx<'_>, _args: ConfigGetArgs) -> Result<()> {
- commands::config_get(ctx)
-}
-
-/// Write the Nitrokey configuration.
fn config_set(ctx: &mut ExecCtx<'_>, args: ConfigSetArgs) -> Result<()> {
let numlock = ConfigOption::try_from(args.no_numlock, args.numlock, "numlock")?;
let capslock = ConfigOption::try_from(args.no_capslock, args.capslock, "capslock")?;
@@ -555,23 +504,7 @@ fn config_set(ctx: &mut ExecCtx<'_>, args: ConfigSetArgs) -> Result<()> {
commands::config_set(ctx, numlock, capslock, scrollock, otp_pin)
}
-/// Lock the Nitrokey.
-fn lock(ctx: &mut ExecCtx<'_>, _args: LockArgs) -> Result<()> {
- commands::lock(ctx)
-}
-
-/// Execute an OTP subcommand.
-fn otp(ctx: &mut ExecCtx<'_>, args: OtpArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-/// Generate a one-time password on the Nitrokey device.
-fn otp_get(ctx: &mut ExecCtx<'_>, args: OtpGetArgs) -> Result<()> {
- commands::otp_get(ctx, args.slot, args.algorithm, args.time)
-}
-
-/// Configure a one-time password slot on the Nitrokey device.
-pub fn otp_set(ctx: &mut ExecCtx<'_>, args: OtpSetArgs) -> Result<()> {
+fn otp_set(ctx: &mut ExecCtx<'_>, args: OtpSetArgs) -> Result<()> {
let data = nitrokey::OtpSlotData {
number: args.slot,
name: args.name,
@@ -590,68 +523,6 @@ pub fn otp_set(ctx: &mut ExecCtx<'_>, args: OtpSetArgs) -> Result<()> {
)
}
-/// Clear an OTP slot.
-fn otp_clear(ctx: &mut ExecCtx<'_>, args: OtpClearArgs) -> Result<()> {
- commands::otp_clear(ctx, args.slot, args.algorithm)
-}
-
-/// Print the status of the OTP slots.
-fn otp_status(ctx: &mut ExecCtx<'_>, args: OtpStatusArgs) -> Result<()> {
- commands::otp_status(ctx, args.all)
-}
-
-/// Execute a PIN subcommand.
-fn pin(ctx: &mut ExecCtx<'_>, args: PinArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-/// Clear the PIN as cached by various other commands.
-fn pin_clear(ctx: &mut ExecCtx<'_>, _args: PinClearArgs) -> Result<()> {
- commands::pin_clear(ctx)
-}
-
-/// Change a PIN.
-fn pin_set(ctx: &mut ExecCtx<'_>, args: PinSetArgs) -> Result<()> {
- commands::pin_set(ctx, args.pintype)
-}
-
-/// Unblock and reset the user PIN.
-fn pin_unblock(ctx: &mut ExecCtx<'_>, _args: PinUnblockArgs) -> Result<()> {
- commands::pin_unblock(ctx)
-}
-
-/// Execute a PWS subcommand.
-fn pws(ctx: &mut ExecCtx<'_>, args: PwsArgs) -> Result<()> {
- args.subcmd.execute(ctx)
-}
-
-/// Access a slot of the password safe on the Nitrokey.
-fn pws_get(ctx: &mut ExecCtx<'_>, args: PwsGetArgs) -> Result<()> {
- commands::pws_get(
- ctx,
- args.slot,
- args.name,
- args.login,
- args.password,
- args.quiet,
- )
-}
-
-/// Set a slot of the password safe on the Nitrokey.
-fn pws_set(ctx: &mut ExecCtx<'_>, args: PwsSetArgs) -> Result<()> {
- commands::pws_set(ctx, args.slot, &args.name, &args.login, &args.password)
-}
-
-/// Clear a PWS slot.
-fn pws_clear(ctx: &mut ExecCtx<'_>, args: PwsClearArgs) -> Result<()> {
- commands::pws_clear(ctx, args.slot)
-}
-
-/// Print the status of the PWS slots.
-fn pws_status(ctx: &mut ExecCtx<'_>, args: PwsStatusArgs) -> Result<()> {
- commands::pws_status(ctx, args.all)
-}
-
/// Parse the command-line arguments and execute the selected command.
pub(crate) fn handle_arguments(ctx: &mut RunCtx<'_>, args: Vec<String>) -> Result<()> {
use structopt::StructOpt;