Remove vendored dependencies

While it appears that by now we actually can get successful builds
without Cargo insisting on Internet access by virtue of using the
--frozen flag, maintaining vendored dependencies is somewhat of a pain
point. This state will also get worse with upcoming changes that replace
argparse in favor of structopt and pull in a slew of new dependencies by
doing so. Then there is also the repository structure aspect, which is
non-standard due to the way we vendor dependencies and a potential
source of confusion.
In order to fix these problems, this change removes all the vendored
dependencies we have.

Delete subrepo argparse/:argparse
Delete subrepo base32/:base32
Delete subrepo cc/:cc
Delete subrepo cfg-if/:cfg-if
Delete subrepo getrandom/:getrandom
Delete subrepo lazy-static/:lazy-static
Delete subrepo libc/:libc
Delete subrepo nitrokey-sys/:nitrokey-sys
Delete subrepo nitrokey/:nitrokey
Delete subrepo rand/:rand

1 files changed, 0 insertions, 735 deletions

diff --git a/nitrokey/src/device/storage.rs b/nitrokey/src/device/storage.rs
deleted file mode 100644
index 370ce36..0000000
--- a/nitrokey/src/device/storage.rs
+++ /dev/null
@@ -1,735 +0,0 @@
-// Copyright (C) 2018-2019 Robin Krahl <robin.krahl@ireas.org>
-// SPDX-License-Identifier: MIT
-
-use std::fmt;
-
-use nitrokey_sys;
-
-use crate::device::{Device, FirmwareVersion, Model};
-use crate::error::Error;
-use crate::otp::GenerateOtp;
-use crate::util::{get_command_result, get_cstring};
-
-/// A Nitrokey Storage device without user or admin authentication.
-///
-/// Use the [`connect`][] method to obtain an instance wrapper or the [`connect_storage`] method to
-/// directly obtain an instance.  If you want to execute a command that requires user or admin
-/// authentication, use [`authenticate_admin`][] or [`authenticate_user`][].
-///
-/// # Examples
-///
-/// Authentication with error handling:
-///
-/// ```no_run
-/// use nitrokey::{Authenticate, User, Storage};
-/// # use nitrokey::Error;
-///
-/// fn perform_user_task<'a>(device: &User<'a, Storage<'a>>) {}
-/// fn perform_other_task(device: &Storage) {}
-///
-/// # fn try_main() -> Result<(), Error> {
-/// let mut manager = nitrokey::take()?;
-/// let device = manager.connect_storage()?;
-/// let device = match device.authenticate_user("123456") {
-///     Ok(user) => {
-///         perform_user_task(&user);
-///         user.device()
-///     },
-///     Err((device, err)) => {
-///         eprintln!("Could not authenticate as user: {}", err);
-///         device
-///     },
-/// };
-/// perform_other_task(&device);
-/// #     Ok(())
-/// # }
-/// ```
-///
-/// [`authenticate_admin`]: trait.Authenticate.html#method.authenticate_admin
-/// [`authenticate_user`]: trait.Authenticate.html#method.authenticate_user
-/// [`connect`]: struct.Manager.html#method.connect
-/// [`connect_storage`]: struct.Manager.html#method.connect_storage
-#[derive(Debug)]
-pub struct Storage<'a> {
-    manager: Option<&'a mut crate::Manager>,
-}
-
-/// The access mode of a volume on the Nitrokey Storage.
-#[derive(Clone, Copy, Debug, PartialEq)]
-pub enum VolumeMode {
-    /// A read-only volume.
-    ReadOnly,
-    /// A read-write volume.
-    ReadWrite,
-}
-
-impl fmt::Display for VolumeMode {
-    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-        f.write_str(match *self {
-            VolumeMode::ReadOnly => "read-only",
-            VolumeMode::ReadWrite => "read-write",
-        })
-    }
-}
-
-/// The status of a volume on a Nitrokey Storage device.
-#[derive(Debug)]
-pub struct VolumeStatus {
-    /// Indicates whether the volume is read-only.
-    pub read_only: bool,
-    /// Indicates whether the volume is active.
-    pub active: bool,
-}
-
-/// Information about the SD card in a Storage device.
-#[derive(Debug)]
-pub struct SdCardData {
-    /// The serial number of the SD card.
-    pub serial_number: u32,
-    /// The size of the SD card in GB.
-    pub size: u8,
-    /// The year the card was manufactured, e. g. 17 for 2017.
-    pub manufacturing_year: u8,
-    /// The month the card was manufactured.
-    pub manufacturing_month: u8,
-    /// The OEM ID.
-    pub oem: u16,
-    /// The manufacturer ID.
-    pub manufacturer: u8,
-}
-
-/// Production information for a Storage device.
-#[derive(Debug)]
-pub struct StorageProductionInfo {
-    /// The firmware version.
-    pub firmware_version: FirmwareVersion,
-    /// The internal firmware version.
-    pub firmware_version_internal: u8,
-    /// The serial number of the CPU.
-    pub serial_number_cpu: u32,
-    /// Information about the SD card.
-    pub sd_card: SdCardData,
-}
-
-/// The status of a Nitrokey Storage device.
-#[derive(Debug)]
-pub struct StorageStatus {
-    /// The status of the unencrypted volume.
-    pub unencrypted_volume: VolumeStatus,
-    /// The status of the encrypted volume.
-    pub encrypted_volume: VolumeStatus,
-    /// The status of the hidden volume.
-    pub hidden_volume: VolumeStatus,
-    /// The firmware version.
-    pub firmware_version: FirmwareVersion,
-    /// Indicates whether the firmware is locked.
-    pub firmware_locked: bool,
-    /// The serial number of the SD card in the Storage stick.
-    pub serial_number_sd_card: u32,
-    /// The serial number of the smart card in the Storage stick.
-    pub serial_number_smart_card: u32,
-    /// The number of remaining login attempts for the user PIN.
-    pub user_retry_count: u8,
-    /// The number of remaining login attempts for the admin PIN.
-    pub admin_retry_count: u8,
-    /// Indicates whether a new SD card was found.
-    pub new_sd_card_found: bool,
-    /// Indicates whether the SD card is filled with random characters.
-    pub filled_with_random: bool,
-    /// Indicates whether the stick has been initialized by generating
-    /// the AES keys.
-    pub stick_initialized: bool,
-}
-
-impl<'a> Storage<'a> {
-    pub(crate) fn new(manager: &'a mut crate::Manager) -> Storage<'a> {
-        Storage {
-            manager: Some(manager),
-        }
-    }
-
-    /// Changes the update PIN.
-    ///
-    /// The update PIN is used to enable firmware updates.  Unlike the user and the admin PIN, the
-    /// update PIN is not managed by the OpenPGP smart card but by the Nitrokey firmware.  There is
-    /// no retry counter as with the other PIN types.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if one of the provided passwords contains a null byte
-    /// - [`WrongPassword`][] if the current update password is wrong
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.change_update_pin("12345678", "87654321") {
-    ///     Ok(()) => println!("Updated update PIN."),
-    ///     Err(err) => eprintln!("Failed to update update PIN: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn change_update_pin(&mut self, current: &str, new: &str) -> Result<(), Error> {
-        let current_string = get_cstring(current)?;
-        let new_string = get_cstring(new)?;
-        get_command_result(unsafe {
-            nitrokey_sys::NK_change_update_password(current_string.as_ptr(), new_string.as_ptr())
-        })
-    }
-
-    /// Enables the firmware update mode.
-    ///
-    /// During firmware update mode, the Nitrokey can no longer be accessed using HID commands.
-    /// To resume normal operation, run `dfu-programmer at32uc3a3256s launch`.  In order to enter
-    /// the firmware update mode, you need the update password that can be changed using the
-    /// [`change_update_pin`][] method.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if one of the provided passwords contains a null byte
-    /// - [`WrongPassword`][] if the current update password is wrong
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.enable_firmware_update("12345678") {
-    ///     Ok(()) => println!("Nitrokey entered update mode."),
-    ///     Err(err) => eprintln!("Could not enter update mode: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn enable_firmware_update(&mut self, update_pin: &str) -> Result<(), Error> {
-        let update_pin_string = get_cstring(update_pin)?;
-        get_command_result(unsafe {
-            nitrokey_sys::NK_enable_firmware_update(update_pin_string.as_ptr())
-        })
-    }
-
-    /// Enables the encrypted storage volume.
-    ///
-    /// Once the encrypted volume is enabled, it is presented to the operating system as a block
-    /// device.  The API does not provide any information on the name or path of this block device.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if the provided password contains a null byte
-    /// - [`WrongPassword`][] if the provided user password is wrong
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.enable_encrypted_volume("123456") {
-    ///     Ok(()) => println!("Enabled the encrypted volume."),
-    ///     Err(err) => eprintln!("Could not enable the encrypted volume: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn enable_encrypted_volume(&mut self, user_pin: &str) -> Result<(), Error> {
-        let user_pin = get_cstring(user_pin)?;
-        get_command_result(unsafe { nitrokey_sys::NK_unlock_encrypted_volume(user_pin.as_ptr()) })
-    }
-
-    /// Disables the encrypted storage volume.
-    ///
-    /// Once the volume is disabled, it can be no longer accessed as a block device.  If the
-    /// encrypted volume has not been enabled, this method still returns a success.
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// fn use_volume() {}
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.enable_encrypted_volume("123456") {
-    ///     Ok(()) => {
-    ///         println!("Enabled the encrypted volume.");
-    ///         use_volume();
-    ///         match device.disable_encrypted_volume() {
-    ///             Ok(()) => println!("Disabled the encrypted volume."),
-    ///             Err(err) => {
-    ///                 eprintln!("Could not disable the encrypted volume: {}", err);
-    ///             },
-    ///         };
-    ///     },
-    ///     Err(err) => eprintln!("Could not enable the encrypted volume: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    pub fn disable_encrypted_volume(&mut self) -> Result<(), Error> {
-        get_command_result(unsafe { nitrokey_sys::NK_lock_encrypted_volume() })
-    }
-
-    /// Enables a hidden storage volume.
-    ///
-    /// This function will only succeed if the encrypted storage ([`enable_encrypted_volume`][]) or
-    /// another hidden volume has been enabled previously.  Once the hidden volume is enabled, it
-    /// is presented to the operating system as a block device and any previously opened encrypted
-    /// or hidden volumes are closed.  The API does not provide any information on the name or path
-    /// of this block device.
-    ///
-    /// Note that the encrypted and the hidden volumes operate on the same storage area, so using
-    /// both at the same time might lead to data loss.
-    ///
-    /// The hidden volume to unlock is selected based on the provided password.
-    ///
-    /// # Errors
-    ///
-    /// - [`AesDecryptionFailed`][] if the encrypted storage has not been opened before calling
-    ///   this method or the AES key has not been built
-    /// - [`InvalidString`][] if the provided password contains a null byte
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// device.enable_encrypted_volume("123445")?;
-    /// match device.enable_hidden_volume("hidden-pw") {
-    ///     Ok(()) => println!("Enabled a hidden volume."),
-    ///     Err(err) => eprintln!("Could not enable the hidden volume: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`enable_encrypted_volume`]: #method.enable_encrypted_volume
-    /// [`AesDecryptionFailed`]: enum.CommandError.html#variant.AesDecryptionFailed
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    pub fn enable_hidden_volume(&mut self, volume_password: &str) -> Result<(), Error> {
-        let volume_password = get_cstring(volume_password)?;
-        get_command_result(unsafe {
-            nitrokey_sys::NK_unlock_hidden_volume(volume_password.as_ptr())
-        })
-    }
-
-    /// Disables a hidden storage volume.
-    ///
-    /// Once the volume is disabled, it can be no longer accessed as a block device.  If no hidden
-    /// volume has been enabled, this method still returns a success.
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// fn use_volume() {}
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// device.enable_encrypted_volume("123445")?;
-    /// match device.enable_hidden_volume("hidden-pw") {
-    ///     Ok(()) => {
-    ///         println!("Enabled the hidden volume.");
-    ///         use_volume();
-    ///         match device.disable_hidden_volume() {
-    ///             Ok(()) => println!("Disabled the hidden volume."),
-    ///             Err(err) => {
-    ///                 eprintln!("Could not disable the hidden volume: {}", err);
-    ///             },
-    ///         };
-    ///     },
-    ///     Err(err) => eprintln!("Could not enable the hidden volume: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    pub fn disable_hidden_volume(&mut self) -> Result<(), Error> {
-        get_command_result(unsafe { nitrokey_sys::NK_lock_hidden_volume() })
-    }
-
-    /// Creates a hidden volume.
-    ///
-    /// The volume is crated in the given slot and in the given range of the available memory,
-    /// where `start` is the start position as a percentage of the available memory, and `end` is
-    /// the end position as a percentage of the available memory.  The volume will be protected by
-    /// the given password.
-    ///
-    /// Note that the encrypted and the hidden volumes operate on the same storage area, so using
-    /// both at the same time might lead to data loss.
-    ///
-    /// According to the libnitrokey documentation, this function only works if the encrypted
-    /// storage has been opened.
-    ///
-    /// # Errors
-    ///
-    /// - [`AesDecryptionFailed`][] if the encrypted storage has not been opened before calling
-    ///   this method or the AES key has not been built
-    /// - [`InvalidString`][] if the provided password contains a null byte
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// device.enable_encrypted_volume("123445")?;
-    /// device.create_hidden_volume(0, 0, 100, "hidden-pw")?;
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`AesDecryptionFailed`]: enum.CommandError.html#variant.AesDecryptionFailed
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    pub fn create_hidden_volume(
-        &mut self,
-        slot: u8,
-        start: u8,
-        end: u8,
-        password: &str,
-    ) -> Result<(), Error> {
-        let password = get_cstring(password)?;
-        get_command_result(unsafe {
-            nitrokey_sys::NK_create_hidden_volume(slot, start, end, password.as_ptr())
-        })
-    }
-
-    /// Sets the access mode of the unencrypted volume.
-    ///
-    /// This command will reconnect the unencrypted volume so buffers should be flushed before
-    /// calling it.  Since firmware version v0.51, this command requires the admin PIN.  Older
-    /// firmware versions are not supported.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if the provided password contains a null byte
-    /// - [`WrongPassword`][] if the provided admin password is wrong
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    /// use nitrokey::VolumeMode;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.set_unencrypted_volume_mode("12345678", VolumeMode::ReadWrite) {
-    ///     Ok(()) => println!("Set the unencrypted volume to read-write mode."),
-    ///     Err(err) => eprintln!("Could not set the unencrypted volume to read-write mode: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn set_unencrypted_volume_mode(
-        &mut self,
-        admin_pin: &str,
-        mode: VolumeMode,
-    ) -> Result<(), Error> {
-        let admin_pin = get_cstring(admin_pin)?;
-        let result = match mode {
-            VolumeMode::ReadOnly => unsafe {
-                nitrokey_sys::NK_set_unencrypted_read_only_admin(admin_pin.as_ptr())
-            },
-            VolumeMode::ReadWrite => unsafe {
-                nitrokey_sys::NK_set_unencrypted_read_write_admin(admin_pin.as_ptr())
-            },
-        };
-        get_command_result(result)
-    }
-
-    /// Sets the access mode of the encrypted volume.
-    ///
-    /// This command will reconnect the encrypted volume so buffers should be flushed before
-    /// calling it.  It is only available in firmware version 0.49.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if the provided password contains a null byte
-    /// - [`WrongPassword`][] if the provided admin password is wrong
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    /// use nitrokey::VolumeMode;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.set_encrypted_volume_mode("12345678", VolumeMode::ReadWrite) {
-    ///     Ok(()) => println!("Set the encrypted volume to read-write mode."),
-    ///     Err(err) => eprintln!("Could not set the encrypted volume to read-write mode: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn set_encrypted_volume_mode(
-        &mut self,
-        admin_pin: &str,
-        mode: VolumeMode,
-    ) -> Result<(), Error> {
-        let admin_pin = get_cstring(admin_pin)?;
-        let result = match mode {
-            VolumeMode::ReadOnly => unsafe {
-                nitrokey_sys::NK_set_encrypted_read_only(admin_pin.as_ptr())
-            },
-            VolumeMode::ReadWrite => unsafe {
-                nitrokey_sys::NK_set_encrypted_read_write(admin_pin.as_ptr())
-            },
-        };
-        get_command_result(result)
-    }
-
-    /// Returns the status of the connected storage device.
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// fn use_volume() {}
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let device = manager.connect_storage()?;
-    /// match device.get_status() {
-    ///     Ok(status) => {
-    ///         println!("SD card ID: {:#x}", status.serial_number_sd_card);
-    ///     },
-    ///     Err(err) => eprintln!("Could not get Storage status: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    pub fn get_status(&self) -> Result<StorageStatus, Error> {
-        let mut raw_status = nitrokey_sys::NK_storage_status {
-            unencrypted_volume_read_only: false,
-            unencrypted_volume_active: false,
-            encrypted_volume_read_only: false,
-            encrypted_volume_active: false,
-            hidden_volume_read_only: false,
-            hidden_volume_active: false,
-            firmware_version_major: 0,
-            firmware_version_minor: 0,
-            firmware_locked: false,
-            serial_number_sd_card: 0,
-            serial_number_smart_card: 0,
-            user_retry_count: 0,
-            admin_retry_count: 0,
-            new_sd_card_found: false,
-            filled_with_random: false,
-            stick_initialized: false,
-        };
-        let raw_result = unsafe { nitrokey_sys::NK_get_status_storage(&mut raw_status) };
-        get_command_result(raw_result).map(|_| StorageStatus::from(raw_status))
-    }
-
-    /// Returns the production information for the connected storage device.
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// fn use_volume() {}
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let device = manager.connect_storage()?;
-    /// match device.get_production_info() {
-    ///     Ok(data) => {
-    ///         println!("SD card ID:   {:#x}", data.sd_card.serial_number);
-    ///         println!("SD card size: {} GB", data.sd_card.size);
-    ///     },
-    ///     Err(err) => eprintln!("Could not get Storage production info: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    pub fn get_production_info(&self) -> Result<StorageProductionInfo, Error> {
-        let mut raw_data = nitrokey_sys::NK_storage_ProductionTest {
-            FirmwareVersion_au8: [0, 2],
-            FirmwareVersionInternal_u8: 0,
-            SD_Card_Size_u8: 0,
-            CPU_CardID_u32: 0,
-            SmartCardID_u32: 0,
-            SD_CardID_u32: 0,
-            SC_UserPwRetryCount: 0,
-            SC_AdminPwRetryCount: 0,
-            SD_Card_ManufacturingYear_u8: 0,
-            SD_Card_ManufacturingMonth_u8: 0,
-            SD_Card_OEM_u16: 0,
-            SD_WriteSpeed_u16: 0,
-            SD_Card_Manufacturer_u8: 0,
-        };
-        let raw_result = unsafe { nitrokey_sys::NK_get_storage_production_info(&mut raw_data) };
-        get_command_result(raw_result).map(|_| StorageProductionInfo::from(raw_data))
-    }
-
-    /// Clears the warning for a new SD card.
-    ///
-    /// The Storage status contains a field for a new SD card warning.  After a factory reset, the
-    /// field is set to true.  After filling the SD card with random data, it is set to false.
-    /// This method can be used to set it to false without filling the SD card with random data.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if the provided password contains a null byte
-    /// - [`WrongPassword`][] if the provided admin password is wrong
-    ///
-    /// # Example
-    ///
-    /// ```no_run
-    /// # use nitrokey::Error;
-    ///
-    /// # fn try_main() -> Result<(), Error> {
-    /// let mut manager = nitrokey::take()?;
-    /// let mut device = manager.connect_storage()?;
-    /// match device.clear_new_sd_card_warning("12345678") {
-    ///     Ok(()) => println!("Cleared the new SD card warning."),
-    ///     Err(err) => eprintln!("Could not set the clear the new SD card warning: {}", err),
-    /// };
-    /// #     Ok(())
-    /// # }
-    /// ```
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn clear_new_sd_card_warning(&mut self, admin_pin: &str) -> Result<(), Error> {
-        let admin_pin = get_cstring(admin_pin)?;
-        get_command_result(unsafe {
-            nitrokey_sys::NK_clear_new_sd_card_warning(admin_pin.as_ptr())
-        })
-    }
-
-    /// Blinks the red and green LED alternatively and infinitely until the device is reconnected.
-    pub fn wink(&mut self) -> Result<(), Error> {
-        get_command_result(unsafe { nitrokey_sys::NK_wink() })
-    }
-
-    /// Exports the firmware to the unencrypted volume.
-    ///
-    /// This command requires the admin PIN.  The unencrypted volume must be in read-write mode
-    /// when this command is executed.  Otherwise, it will still return `Ok` but not write the
-    /// firmware.
-    ///
-    /// This command unmounts the unencrypted volume if it has been mounted, so all buffers should
-    /// be flushed.  The firmware is written to the `firmware.bin` file on the unencrypted volume.
-    ///
-    /// # Errors
-    ///
-    /// - [`InvalidString`][] if one of the provided passwords contains a null byte
-    /// - [`WrongPassword`][] if the admin password is wrong
-    ///
-    /// [`InvalidString`]: enum.LibraryError.html#variant.InvalidString
-    /// [`WrongPassword`]: enum.CommandError.html#variant.WrongPassword
-    pub fn export_firmware(&mut self, admin_pin: &str) -> Result<(), Error> {
-        let admin_pin_string = get_cstring(admin_pin)?;
-        get_command_result(unsafe { nitrokey_sys::NK_export_firmware(admin_pin_string.as_ptr()) })
-    }
-}
-
-impl<'a> Drop for Storage<'a> {
-    fn drop(&mut self) {
-        unsafe {
-            nitrokey_sys::NK_logout();
-        }
-    }
-}
-
-impl<'a> Device<'a> for Storage<'a> {
-    fn into_manager(mut self) -> &'a mut crate::Manager {
-        self.manager.take().unwrap()
-    }
-
-    fn get_model(&self) -> Model {
-        Model::Storage
-    }
-}
-
-impl<'a> GenerateOtp for Storage<'a> {}
-
-impl From<nitrokey_sys::NK_storage_ProductionTest> for StorageProductionInfo {
-    fn from(data: nitrokey_sys::NK_storage_ProductionTest) -> Self {
-        Self {
-            firmware_version: FirmwareVersion {
-                major: data.FirmwareVersion_au8[0],
-                minor: data.FirmwareVersion_au8[1],
-            },
-            firmware_version_internal: data.FirmwareVersionInternal_u8,
-            serial_number_cpu: data.CPU_CardID_u32,
-            sd_card: SdCardData {
-                serial_number: data.SD_CardID_u32,
-                size: data.SD_Card_Size_u8,
-                manufacturing_year: data.SD_Card_ManufacturingYear_u8,
-                manufacturing_month: data.SD_Card_ManufacturingMonth_u8,
-                oem: data.SD_Card_OEM_u16,
-                manufacturer: data.SD_Card_Manufacturer_u8,
-            },
-        }
-    }
-}
-
-impl From<nitrokey_sys::NK_storage_status> for StorageStatus {
-    fn from(status: nitrokey_sys::NK_storage_status) -> Self {
-        StorageStatus {
-            unencrypted_volume: VolumeStatus {
-                read_only: status.unencrypted_volume_read_only,
-                active: status.unencrypted_volume_active,
-            },
-            encrypted_volume: VolumeStatus {
-                read_only: status.encrypted_volume_read_only,
-                active: status.encrypted_volume_active,
-            },
-            hidden_volume: VolumeStatus {
-                read_only: status.hidden_volume_read_only,
-                active: status.hidden_volume_active,
-            },
-            firmware_version: FirmwareVersion {
-                major: status.firmware_version_major,
-                minor: status.firmware_version_minor,
-            },
-            firmware_locked: status.firmware_locked,
-            serial_number_sd_card: status.serial_number_sd_card,
-            serial_number_smart_card: status.serial_number_smart_card,
-            user_retry_count: status.user_retry_count,
-            admin_retry_count: status.admin_retry_count,
-            new_sd_card_found: status.new_sd_card_found,
-            filled_with_random: status.filled_with_random,
-            stick_initialized: status.stick_initialized,
-        }
-    }
-}