diff options
Diffstat (limited to 'libnitrokey-v3.4/NK_C_API.h')
| -rw-r--r-- | libnitrokey-v3.4/NK_C_API.h | 792 |
1 files changed, 792 insertions, 0 deletions
diff --git a/libnitrokey-v3.4/NK_C_API.h b/libnitrokey-v3.4/NK_C_API.h new file mode 100644 index 0000000..b1bdf1e --- /dev/null +++ b/libnitrokey-v3.4/NK_C_API.h @@ -0,0 +1,792 @@ +/* + * Copyright (c) 2015-2018 Nitrokey UG + * + * This file is part of libnitrokey. + * + * libnitrokey is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * any later version. + * + * libnitrokey is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with libnitrokey. If not, see <http://www.gnu.org/licenses/>. + * + * SPDX-License-Identifier: LGPL-3.0 + */ + +#ifndef LIBNITROKEY_NK_C_API_H +#define LIBNITROKEY_NK_C_API_H + +#include <stdbool.h> +#include <stdint.h> + +#include "deprecated.h" + +#ifdef _MSC_VER +#define NK_C_API __declspec(dllexport) +#else +#define NK_C_API +#endif + +#ifdef __cplusplus +extern "C" { +#endif + + static const int MAXIMUM_STR_REPLY_LENGTH = 8192; + + /** + * The Nitrokey device models supported by the API. + */ + enum NK_device_model { + /** + * Use, if no supported device is connected + */ + NK_DISCONNECTED = 0, + /** + * Nitrokey Pro. + */ + NK_PRO = 1, + /** + * Nitrokey Storage. + */ + NK_STORAGE = 2 + }; + + /** + * Stores the status of a Storage device. + */ + struct NK_storage_status { + /** + * Indicates whether the unencrypted volume is read-only. + */ + bool unencrypted_volume_read_only; + /** + * Indicates whether the unencrypted volume is active. + */ + bool unencrypted_volume_active; + /** + * Indicates whether the encrypted volume is read-only. + */ + bool encrypted_volume_read_only; + /** + * Indicates whether the encrypted volume is active. + */ + bool encrypted_volume_active; + /** + * Indicates whether the hidden volume is read-only. + */ + bool hidden_volume_read_only; + /** + * Indicates whether the hidden volume is active. + */ + bool hidden_volume_active; + /** + * The major firmware version, e. g. 0 in v0.40. + */ + uint8_t firmware_version_major; + /** + * The minor firmware version, e. g. 40 in v0.40. + */ + uint8_t firmware_version_minor; + /** + * Indicates whether the firmware is locked. + */ + bool firmware_locked; + /** + * The serial number of the SD card in the Storage stick. + */ + uint32_t serial_number_sd_card; + /** + * The serial number of the smart card in the Storage stick. + */ + uint32_t serial_number_smart_card; + /** + * The number of remaining login attempts for the user PIN. + */ + uint8_t user_retry_count; + /** + * The number of remaining login attempts for the admin PIN. + */ + uint8_t admin_retry_count; + /** + * Indicates whether a new SD card was found. + */ + bool new_sd_card_found; + /** + * Indicates whether the SD card is filled with random characters. + */ + bool filled_with_random; + /** + * Indicates whether the stick has been initialized by generating + * the AES keys. + */ + bool stick_initialized; + }; + + struct NK_storage_ProductionTest{ + uint8_t FirmwareVersion_au8[2]; + uint8_t FirmwareVersionInternal_u8; + uint8_t SD_Card_Size_u8; + uint32_t CPU_CardID_u32; + uint32_t SmartCardID_u32; + uint32_t SD_CardID_u32; + uint8_t SC_UserPwRetryCount; + uint8_t SC_AdminPwRetryCount; + uint8_t SD_Card_ManufacturingYear_u8; + uint8_t SD_Card_ManufacturingMonth_u8; + uint16_t SD_Card_OEM_u16; + uint16_t SD_WriteSpeed_u16; + uint8_t SD_Card_Manufacturer_u8; + }; + + NK_C_API int NK_get_storage_production_info(struct NK_storage_ProductionTest * out); + + +/** + * Set debug level of messages written on stderr + * @param state state=True - most messages, state=False - only errors level + */ + NK_C_API void NK_set_debug(bool state); + + /** + * Set debug level of messages written on stderr + * @param level (int) 0-lowest verbosity, 5-highest verbosity + */ + NK_C_API void NK_set_debug_level(const int level); + + /** + * Get the major library version, e. g. the 3 in v3.2. + * @return the major library version + */ + NK_C_API unsigned int NK_get_major_library_version(); + + /** + * Get the minor library version, e. g. the 2 in v3.2. + * @return the minor library version + */ + NK_C_API unsigned int NK_get_minor_library_version(); + + /** + * Get the library version as a string. This is the output of + * `git describe --always` at compile time, for example "v3.3" or + * "v3.3-19-gaee920b". + * The return value is a string literal and must not be freed. + * @return the library version as a string + */ + NK_C_API const char* NK_get_library_version(); + + /** + * Connect to device of given model. Currently library can be connected only to one device at once. + * @param device_model char 'S': Nitrokey Storage, 'P': Nitrokey Pro + * @return 1 if connected, 0 if wrong model or cannot connect + */ + NK_C_API int NK_login(const char *device_model); + + /** + * Connect to device of given model. Currently library can be connected only to one device at once. + * @param device_model NK_device_model: NK_PRO: Nitrokey Pro, NK_STORAGE: Nitrokey Storage + * @return 1 if connected, 0 if wrong model or cannot connect + */ + NK_C_API int NK_login_enum(enum NK_device_model device_model); + + /** + * Connect to first available device, starting checking from Pro 1st to Storage 2nd. + * @return 1 if connected, 0 if wrong model or cannot connect + */ + NK_C_API int NK_login_auto(); + + /** + * Disconnect from the device. + * @return command processing error code + */ + NK_C_API int NK_logout(); + + /** + * Query the model of the connected device. + * Returns the model of the connected device or NK_DISCONNECTED. + * + * @return true if a device is connected and the out argument has been set + */ + NK_C_API enum NK_device_model NK_get_device_model(); + + /** + * Return the debug status string. Debug purposes. + * @return command processing error code + */ + NK_C_API char * NK_status(); + + /** + * Return the device's serial number string in hex. + * @return string device's serial number in hex + */ + NK_C_API char * NK_device_serial_number(); + + /** + * Get last command processing status. Useful for commands which returns the results of their own and could not return + * an error code. + * @return previous command processing error code + */ + NK_C_API uint8_t NK_get_last_command_status(); + + /** + * Lock device - cancel any user device unlocking. + * @return command processing error code + */ + NK_C_API int NK_lock_device(); + + /** + * Authenticates the user on USER privilages with user_password and sets user's temporary password on device to user_temporary_password. + * @param user_password char[25] current user password + * @param user_temporary_password char[25] user temporary password to be set on device for further communication (authentication command) + * @return command processing error code + */ + NK_C_API int NK_user_authenticate(const char* user_password, const char* user_temporary_password); + + /** + * Authenticates the user on ADMIN privilages with admin_password and sets user's temporary password on device to admin_temporary_password. + * @param admin_password char[25] current administrator PIN + * @param admin_temporary_password char[25] admin temporary password to be set on device for further communication (authentication command) + * @return command processing error code + */ + NK_C_API int NK_first_authenticate(const char* admin_password, const char* admin_temporary_password); + + /** + * Execute a factory reset. + * @param admin_password char[20] current administrator PIN + * @return command processing error code + */ + NK_C_API int NK_factory_reset(const char* admin_password); + + /** + * Generates AES key on the device + * @param admin_password char[20] current administrator PIN + * @return command processing error code + */ + NK_C_API int NK_build_aes_key(const char* admin_password); + + /** + * Unlock user PIN locked after 3 incorrect codes tries. + * @param admin_password char[20] current administrator PIN + * @return command processing error code + */ + NK_C_API int NK_unlock_user_password(const char *admin_password, const char *new_user_password); + + /** + * Write general config to the device + * @param numlock set value in range [0-1] to send HOTP code from slot 'numlock' after double pressing numlock + * or outside the range to disable this function + * @param capslock similar to numlock but with capslock + * @param scrolllock similar to numlock but with scrolllock + * @param enable_user_password set True to enable OTP PIN protection (require PIN each OTP code request) + * @param delete_user_password (unused) + * @param admin_temporary_password current admin temporary password + * @return command processing error code + */ + NK_C_API int NK_write_config(uint8_t numlock, uint8_t capslock, uint8_t scrolllock, + bool enable_user_password, bool delete_user_password, const char *admin_temporary_password); + + /** + * Get currently set config - status of function Numlock/Capslock/Scrollock OTP sending and is enabled PIN protected OTP + * @see NK_write_config + * @return uint8_t general_config[5]: + * uint8_t numlock; + uint8_t capslock; + uint8_t scrolllock; + uint8_t enable_user_password; + uint8_t delete_user_password; + + */ + NK_C_API uint8_t* NK_read_config(); + + //OTP + + /** + * Get name of given TOTP slot + * @param slot_number TOTP slot number, slot_number<15 + * @return char[20] the name of the slot + */ + NK_C_API char * NK_get_totp_slot_name(uint8_t slot_number); + + /** + * + * @param slot_number HOTP slot number, slot_number<3 + * @return char[20] the name of the slot + */ + NK_C_API char * NK_get_hotp_slot_name(uint8_t slot_number); + + /** + * Erase HOTP slot data from the device + * @param slot_number HOTP slot number, slot_number<3 + * @param temporary_password admin temporary password + * @return command processing error code + */ + NK_C_API int NK_erase_hotp_slot(uint8_t slot_number, const char *temporary_password); + + /** + * Erase TOTP slot data from the device + * @param slot_number TOTP slot number, slot_number<15 + * @param temporary_password admin temporary password + * @return command processing error code + */ + NK_C_API int NK_erase_totp_slot(uint8_t slot_number, const char *temporary_password); + + /** + * Write HOTP slot data to the device + * @param slot_number HOTP slot number, slot_number<3, 0-numbered + * @param slot_name char[15] desired slot name. C string (requires ending '\0'; 16 bytes). + * @param secret char[40] 160-bit or 320-bit (currently Pro v0.8 only) secret as a hex string. C string (requires ending '\0'; 41 bytes). + * See NitrokeyManager::is_320_OTP_secret_supported. + * @param hotp_counter uint32_t starting value of HOTP counter + * @param use_8_digits should returned codes be 6 (false) or 8 digits (true) + * @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock + * @param use_tokenID @see token_ID + * @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section + * @param temporary_password char[25] admin temporary password + * @return command processing error code + */ + NK_C_API int NK_write_hotp_slot(uint8_t slot_number, const char *slot_name, const char *secret, uint64_t hotp_counter, + bool use_8_digits, bool use_enter, bool use_tokenID, const char *token_ID, + const char *temporary_password); + + /** + * Write TOTP slot data to the device + * @param slot_number TOTP slot number, slot_number<15, 0-numbered + * @param slot_name char[15] desired slot name. C string (requires ending '\0'; 16 bytes). + * @param secret char[40] 160-bit or 320-bit (currently Pro v0.8 only) secret as a hex string. C string (requires ending '\0'; 41 bytes). + * See NitrokeyManager::is_320_OTP_secret_supported. + * @param time_window uint16_t time window for this TOTP + * @param use_8_digits should returned codes be 6 (false) or 8 digits (true) + * @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock + * @param use_tokenID @see token_ID + * @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section + * @param temporary_password char[20] admin temporary password + * @return command processing error code + */ + NK_C_API int NK_write_totp_slot(uint8_t slot_number, const char *slot_name, const char *secret, uint16_t time_window, + bool use_8_digits, bool use_enter, bool use_tokenID, const char *token_ID, + const char *temporary_password); + + /** + * Get HOTP code from the device + * @param slot_number HOTP slot number, slot_number<3 + * @return HOTP code + */ + NK_C_API char * NK_get_hotp_code(uint8_t slot_number); + + /** + * Get HOTP code from the device (PIN protected) + * @param slot_number HOTP slot number, slot_number<3 + * @param user_temporary_password char[25] user temporary password if PIN protected OTP codes are enabled, + * otherwise should be set to empty string - '' + * @return HOTP code + */ + NK_C_API char * NK_get_hotp_code_PIN(uint8_t slot_number, const char *user_temporary_password); + + /** + * Get TOTP code from the device + * @param slot_number TOTP slot number, slot_number<15 + * @param challenge TOTP challenge -- unused + * @param last_totp_time last time -- unused + * @param last_interval last interval --unused + * @return TOTP code + */ + NK_C_API char * NK_get_totp_code(uint8_t slot_number, uint64_t challenge, uint64_t last_totp_time, + uint8_t last_interval); + + /** + * Get TOTP code from the device (PIN protected) + * @param slot_number TOTP slot number, slot_number<15 + * @param challenge TOTP challenge -- unused + * @param last_totp_time last time -- unused + * @param last_interval last interval -- unused + * @param user_temporary_password char[25] user temporary password if PIN protected OTP codes are enabled, + * otherwise should be set to empty string - '' + * @return TOTP code + */ + NK_C_API char * NK_get_totp_code_PIN(uint8_t slot_number, uint64_t challenge, + uint64_t last_totp_time, uint8_t last_interval, + const char *user_temporary_password); + + /** + * Set time on the device (for TOTP requests) + * @param time seconds in unix epoch (from 01.01.1970) + * @return command processing error code + */ + NK_C_API int NK_totp_set_time(uint64_t time); + + /** + * Set the device time used for TOTP to the given time. Contrary to + * {@code set_time(uint64_t)}, this command fails if {@code old_time} + * > {@code time} or if {@code old_time} is zero (where {@code + * old_time} is the current time on the device). + * + * @param time new device time as Unix timestamp (seconds since + * 1970-01-01) + * @return command processing error code + */ + NK_C_API int NK_totp_set_time_soft(uint64_t time); + + // NK_totp_get_time is deprecated -- use NK_totp_set_time_soft instead + DEPRECATED + NK_C_API int NK_totp_get_time(); + + //passwords + /** + * Change administrator PIN + * @param current_PIN char[25] current PIN + * @param new_PIN char[25] new PIN + * @return command processing error code + */ + NK_C_API int NK_change_admin_PIN(const char *current_PIN, const char *new_PIN); + + /** + * Change user PIN + * @param current_PIN char[25] current PIN + * @param new_PIN char[25] new PIN + * @return command processing error code + */ + NK_C_API int NK_change_user_PIN(const char *current_PIN, const char *new_PIN); + + + /** + * Get retry count of user PIN + * @return user PIN retry count + */ + NK_C_API uint8_t NK_get_user_retry_count(); + + /** + * Get retry count of admin PIN + * @return admin PIN retry count + */ + NK_C_API uint8_t NK_get_admin_retry_count(); + //password safe + + /** + * Enable password safe access + * @param user_pin char[30] current user PIN + * @return command processing error code + */ + NK_C_API int NK_enable_password_safe(const char *user_pin); + + /** + * Get password safe slots' status + * @return uint8_t[16] slot statuses - each byte represents one slot with 0 (not programmed) and 1 (programmed) + */ + NK_C_API uint8_t * NK_get_password_safe_slot_status(); + + /** + * Get password safe slot name + * @param slot_number password safe slot number, slot_number<16 + * @return slot name + */ + NK_C_API char *NK_get_password_safe_slot_name(uint8_t slot_number); + + /** + * Get password safe slot login + * @param slot_number password safe slot number, slot_number<16 + * @return login from the PWS slot + */ + NK_C_API char *NK_get_password_safe_slot_login(uint8_t slot_number); + + /** + * Get the password safe slot password + * @param slot_number password safe slot number, slot_number<16 + * @return password from the PWS slot + */ + NK_C_API char *NK_get_password_safe_slot_password(uint8_t slot_number); + + /** + * Write password safe data to the slot + * @param slot_number password safe slot number, slot_number<16 + * @param slot_name char[11] name of the slot + * @param slot_login char[32] login string + * @param slot_password char[20] password string + * @return command processing error code + */ + NK_C_API int NK_write_password_safe_slot(uint8_t slot_number, const char *slot_name, + const char *slot_login, const char *slot_password); + + /** + * Erase the password safe slot from the device + * @param slot_number password safe slot number, slot_number<16 + * @return command processing error code + */ + NK_C_API int NK_erase_password_safe_slot(uint8_t slot_number); + + /** + * Check whether AES is supported by the device + * @return 0 for no and 1 for yes + */ + NK_C_API int NK_is_AES_supported(const char *user_password); + + /** + * Get device's major firmware version + * @return major part of the version number (e.g. 0 from 0.48, 0 from 0.7 etc.) + */ + NK_C_API int NK_get_major_firmware_version(); + + /** + * Get device's minor firmware version + * @return minor part of the version number (e.g. 7 from 0.7, 48 from 0.48 etc.) + */ + NK_C_API int NK_get_minor_firmware_version(); + + /** + * Function to determine unencrypted volume PIN type + * @param minor_firmware_version + * @return Returns 1, if set unencrypted volume ro/rw pin type is User, 0 otherwise. + */ + NK_C_API int NK_set_unencrypted_volume_rorw_pin_type_user(); + + + /** + * This command is typically run to initiate + * communication with the device (altough not required). + * It sets time on device and returns its current status + * - a combination of set_time and get_status_storage commands + * Storage only + * @param seconds_from_epoch date and time expressed in seconds + */ + NK_C_API int NK_send_startup(uint64_t seconds_from_epoch); + + /** + * Unlock encrypted volume. + * Storage only + * @param user_pin user pin 20 characters + * @return command processing error code + */ + NK_C_API int NK_unlock_encrypted_volume(const char* user_pin); + + /** + * Locks encrypted volume + * @return command processing error code + */ + NK_C_API int NK_lock_encrypted_volume(); + + /** + * Unlock hidden volume and lock encrypted volume. + * Requires encrypted volume to be unlocked. + * Storage only + * @param hidden_volume_password 20 characters + * @return command processing error code + */ + NK_C_API int NK_unlock_hidden_volume(const char* hidden_volume_password); + + /** + * Locks hidden volume + * @return command processing error code + */ + NK_C_API int NK_lock_hidden_volume(); + + /** + * Create hidden volume. + * Requires encrypted volume to be unlocked. + * Storage only + * @param slot_nr slot number in range 0-3 + * @param start_percent volume begin expressed in percent of total available storage, int in range 0-99 + * @param end_percent volume end expressed in percent of total available storage, int in range 1-100 + * @param hidden_volume_password 20 characters + * @return command processing error code + */ + NK_C_API int NK_create_hidden_volume(uint8_t slot_nr, uint8_t start_percent, uint8_t end_percent, + const char *hidden_volume_password); + + /** + * Make unencrypted volume read-only. + * Device hides unencrypted volume for a second therefore make sure + * buffers are flushed before running. + * Does nothing if firmware version is not matched + * Firmware range: Storage v0.50, v0.48 and below + * Storage only + * @param user_pin 20 characters User PIN + * @return command processing error code + */ + NK_C_API int NK_set_unencrypted_read_only(const char *user_pin); + + /** + * Make unencrypted volume read-write. + * Device hides unencrypted volume for a second therefore make sure + * buffers are flushed before running. + * Does nothing if firmware version is not matched + * Firmware range: Storage v0.50, v0.48 and below + * Storage only + * @param user_pin 20 characters User PIN + * @return command processing error code + */ + NK_C_API int NK_set_unencrypted_read_write(const char *user_pin); + + /** + * Make unencrypted volume read-only. + * Device hides unencrypted volume for a second therefore make sure + * buffers are flushed before running. + * Does nothing if firmware version is not matched + * Firmware range: Storage v0.49, v0.51+ + * Storage only + * @param admin_pin 20 characters Admin PIN + * @return command processing error code + */ + NK_C_API int NK_set_unencrypted_read_only_admin(const char* admin_pin); + + /** + * Make unencrypted volume read-write. + * Device hides unencrypted volume for a second therefore make sure + * buffers are flushed before running. + * Does nothing if firmware version is not matched + * Firmware range: Storage v0.49, v0.51+ + * Storage only + * @param admin_pin 20 characters Admin PIN + * @return command processing error code + */ + NK_C_API int NK_set_unencrypted_read_write_admin(const char* admin_pin); + + /** + * Make encrypted volume read-only. + * Device hides encrypted volume for a second therefore make sure + * buffers are flushed before running. + * Firmware range: v0.49 only, future (see firmware release notes) + * Storage only + * @param admin_pin 20 characters + * @return command processing error code + */ + NK_C_API int NK_set_encrypted_read_only(const char* admin_pin); + + /** + * Make encrypted volume read-write. + * Device hides encrypted volume for a second therefore make sure + * buffers are flushed before running. + * Firmware range: v0.49 only, future (see firmware release notes) + * Storage only + * @param admin_pin 20 characters + * @return command processing error code + */ + NK_C_API int NK_set_encrypted_read_write(const char* admin_pin); + + /** + * Exports device's firmware to unencrypted volume. + * Storage only + * @param admin_pin 20 characters + * @return command processing error code + */ + NK_C_API int NK_export_firmware(const char* admin_pin); + + /** + * Clear new SD card notification. It is set after factory reset. + * Storage only + * @param admin_pin 20 characters + * @return command processing error code + */ + NK_C_API int NK_clear_new_sd_card_warning(const char* admin_pin); + + /** + * Fill SD card with random data. + * Should be done on first stick initialization after creating keys. + * Storage only + * @param admin_pin 20 characters + * @return command processing error code + */ + NK_C_API int NK_fill_SD_card_with_random_data(const char* admin_pin); + + /** + * Change update password. + * Update password is used for entering update mode, where firmware + * could be uploaded using dfu-programmer or other means. + * Storage only + * @param current_update_password 20 characters + * @param new_update_password 20 characters + * @return command processing error code + */ + NK_C_API int NK_change_update_password(const char* current_update_password, + const char* new_update_password); + + /** + * Enter update mode. Needs update password. + * When device is in update mode it no longer accepts any HID commands until + * firmware is launched (regardless of being updated or not). + * Smartcard (through CCID interface) and its all volumes are not visible as well. + * Its VID and PID are changed to factory-default (03eb:2ff1 Atmel Corp.) + * to be detected by flashing software. Result of this command can be reversed + * by using 'launch' command. + * For dfu-programmer it would be: 'dfu-programmer at32uc3a3256s launch'. + * Storage only + * @param update_password 20 characters + * @return command processing error code + */ + NK_C_API int NK_enable_firmware_update(const char* update_password); + + /** + * Get Storage stick status as string. + * Storage only + * @return string with devices attributes + */ + NK_C_API char* NK_get_status_storage_as_string(); + + /** + * Get the Storage stick status and return the command processing + * error code. If the code is zero, i. e. the command was successful, + * the storage status is written to the output pointer's target. + * The output pointer must not be null. + * + * @param out the output pointer for the storage status + * @return command processing error code + */ + NK_C_API int NK_get_status_storage(struct NK_storage_status* out); + + /** + * Get SD card usage attributes as string. + * Usable during hidden volumes creation. + * Storage only + * @return string with SD card usage attributes + */ + NK_C_API char* NK_get_SD_usage_data_as_string(); + + /** + * Get progress value of current long operation. + * Storage only + * @return int in range 0-100 or -1 if device is not busy + */ + NK_C_API int NK_get_progress_bar_value(); + +/** + * Returns a list of connected devices' id's, delimited by ';' character. Empty string is returned on no device found. + * Each ID could consist of: + * 1. SC_id:SD_id_p_path (about 40 bytes) + * 2. path (about 10 bytes) + * where 'path' is USB path (bus:num), 'SC_id' is smartcard ID, 'SD_id' is storage card ID and + * '_p_' and ':' are field delimiters. + * Case 2 (USB path only) is used, when the device cannot be asked about its status data (e.g. during a long operation, + * like clearing SD card. + * Internally connects to all available devices and creates a map between ids and connection objects. + * Side effects: changes active device to last detected Storage device. + * Storage only + * @example Example of returned data: '00005d19:dacc2cb4_p_0001:0010:02;000037c7:4cf12445_p_0001:000f:02;0001:000c:02' + * @return string delimited id's of connected devices + */ + NK_C_API char* NK_list_devices_by_cpuID(); + + +/** + * Connects to the device with given ID. ID's list could be created with NK_list_devices_by_cpuID. + * Requires calling to NK_list_devices_by_cpuID first. Connecting to arbitrary ID/USB path is not handled. + * On connection requests status from device and disconnects it / removes from map on connection failure. + * Storage only + * @param id Target device ID (example: '00005d19:dacc2cb4_p_0001:0010:02') + * @return 1 on successful connection, 0 otherwise + */ + NK_C_API int NK_connect_with_ID(const char* id); + + /** + * Blink red and green LED alternatively and infinitely (until device is reconnected). + * @return command processing error code + */ + NK_C_API int NK_wink(); + +#ifdef __cplusplus +} +#endif + +#endif //LIBNITROKEY_NK_C_API_H |