aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--patches/deprecated.diff8
-rw-r--r--patches/remove-uint.diff6
-rw-r--r--src/ffi.rs834
3 files changed, 424 insertions, 424 deletions
diff --git a/patches/deprecated.diff b/patches/deprecated.diff
index dff4b55..a7d2359 100644
--- a/patches/deprecated.diff
+++ b/patches/deprecated.diff
@@ -6,10 +6,10 @@ Index: nitrokey-sys-rs/src/ffi.rs
===================================================================
--- nitrokey-sys-rs.orig/src/ffi.rs
+++ nitrokey-sys-rs/src/ffi.rs
-@@ -763,6 +763,7 @@ extern "C" {
- /// deprecated in favor of NK_get_status_as_string.
- /// @return string representation of the status or an empty string
- /// if the command failed
+@@ -762,6 +762,7 @@ extern "C" {
+ #[doc = " deprecated in favor of NK_get_status_as_string."]
+ #[doc = " @return string representation of the status or an empty string"]
+ #[doc = " if the command failed"]
+ #[deprecated(since = "3.5.0", note="use `NK_get_status_as_string` instead")]
pub fn NK_status() -> *mut ::std::os::raw::c_char;
}
diff --git a/patches/remove-uint.diff b/patches/remove-uint.diff
index 2db1d95..e4c24ba 100644
--- a/patches/remove-uint.diff
+++ b/patches/remove-uint.diff
@@ -10,12 +10,12 @@ Index: nitrokey-sys-rs/src/ffi.rs
--- nitrokey-sys-rs.orig/src/ffi.rs
+++ nitrokey-sys-rs/src/ffi.rs
@@ -1,9 +1,5 @@
- /* automatically generated by rust-bindgen */
+ /* automatically generated by rust-bindgen 0.55.1 */
-pub type __uint8_t = ::std::os::raw::c_uchar;
-pub type __uint16_t = ::std::os::raw::c_ushort;
-pub type __uint32_t = ::std::os::raw::c_uint;
-pub type __uint64_t = ::std::os::raw::c_ulong;
extern "C" {
- #[link_name = "\u{1}NK_PWS_SLOT_COUNT"]
- pub static mut NK_PWS_SLOT_COUNT: u8;
+ pub static NK_PWS_SLOT_COUNT: u8;
+ }
diff --git a/src/ffi.rs b/src/ffi.rs
index 799e5bc..810660f 100644
--- a/src/ffi.rs
+++ b/src/ffi.rs
@@ -1,30 +1,29 @@
-/* automatically generated by rust-bindgen */
+/* automatically generated by rust-bindgen 0.55.1 */
extern "C" {
- #[link_name = "\u{1}NK_PWS_SLOT_COUNT"]
- pub static mut NK_PWS_SLOT_COUNT: u8;
+ pub static NK_PWS_SLOT_COUNT: u8;
}
pub const MAXIMUM_STR_REPLY_LENGTH: ::std::os::raw::c_int = 8192;
-/// Use, if no supported device is connected
+#[doc = " Use, if no supported device is connected"]
pub const NK_device_model_NK_DISCONNECTED: NK_device_model = 0;
-/// Nitrokey Pro.
+#[doc = " Nitrokey Pro."]
pub const NK_device_model_NK_PRO: NK_device_model = 1;
-/// Nitrokey Storage.
+#[doc = " Nitrokey Storage."]
pub const NK_device_model_NK_STORAGE: NK_device_model = 2;
-/// The Nitrokey device models supported by the API.
-pub type NK_device_model = u32;
-/// The connection info for a Nitrokey device as a linked list.
+#[doc = " The Nitrokey device models supported by the API."]
+pub type NK_device_model = ::std::os::raw::c_uint;
+#[doc = " The connection info for a Nitrokey device as a linked list."]
#[repr(C)]
#[derive(Debug, Copy, Clone)]
pub struct NK_device_info {
- /// The model of the Nitrokey device.
+ #[doc = " The model of the Nitrokey device."]
pub model: NK_device_model,
- /// The USB device path for NK_connect_with_path.
+ #[doc = " The USB device path for NK_connect_with_path."]
pub path: *mut ::std::os::raw::c_char,
- /// The serial number.
+ #[doc = " The serial number."]
pub serial_number: *mut ::std::os::raw::c_char,
- /// The pointer to the next element of the linked list or null
- /// if this is the last element in the list.
+ #[doc = " The pointer to the next element of the linked list or null"]
+ #[doc = " if this is the last element in the list."]
pub next: *mut NK_device_info,
}
#[test]
@@ -80,30 +79,30 @@ fn bindgen_test_layout_NK_device_info() {
)
);
}
-/// Stores the common device status for all Nitrokey devices.
+#[doc = " Stores the common device status for all Nitrokey devices."]
#[repr(C)]
#[derive(Debug, Copy, Clone)]
pub struct NK_status {
- /// The major firmware version, e. g. 0 in v0.40.
+ #[doc = " The major firmware version, e. g. 0 in v0.40."]
pub firmware_version_major: u8,
- /// The minor firmware version, e. g. 40 in v0.40.
+ #[doc = " The minor firmware version, e. g. 40 in v0.40."]
pub firmware_version_minor: u8,
- /// The serial number of the smart card.
+ #[doc = " The serial number of the smart card."]
pub serial_number_smart_card: u32,
- /// The HOTP slot to generate a password from if the numlock
- /// key is pressed twice (slot 0-1, or any other value to
- /// disable the function).
+ #[doc = " The HOTP slot to generate a password from if the numlock"]
+ #[doc = " key is pressed twice (slot 0-1, or any other value to"]
+ #[doc = " disable the function)."]
pub config_numlock: u8,
- /// The HOTP slot to generate a password from if the capslock
- /// key is pressed twice (slot 0-1, or any other value to
- /// disable the function).
+ #[doc = " The HOTP slot to generate a password from if the capslock"]
+ #[doc = " key is pressed twice (slot 0-1, or any other value to"]
+ #[doc = " disable the function)."]
pub config_capslock: u8,
- /// The HOTP slot to generate a password from if the scrolllock
- /// key is pressed twice (slot 0-1, or any other value to
- /// disable the function).
+ #[doc = " The HOTP slot to generate a password from if the scrolllock"]
+ #[doc = " key is pressed twice (slot 0-1, or any other value to"]
+ #[doc = " disable the function)."]
pub config_scrolllock: u8,
- /// Indicates whether the user password is required to generate
- /// an OTP value.
+ #[doc = " Indicates whether the user password is required to generate"]
+ #[doc = " an OTP value."]
pub otp_user_password: bool,
}
#[test]
@@ -195,42 +194,42 @@ fn bindgen_test_layout_NK_status() {
)
);
}
-/// Stores the status of a Storage device.
+#[doc = " Stores the status of a Storage device."]
#[repr(C)]
#[derive(Debug, Copy, Clone)]
pub struct NK_storage_status {
- /// Indicates whether the unencrypted volume is read-only.
+ #[doc = " Indicates whether the unencrypted volume is read-only."]
pub unencrypted_volume_read_only: bool,
- /// Indicates whether the unencrypted volume is active.
+ #[doc = " Indicates whether the unencrypted volume is active."]
pub unencrypted_volume_active: bool,
- /// Indicates whether the encrypted volume is read-only.
+ #[doc = " Indicates whether the encrypted volume is read-only."]
pub encrypted_volume_read_only: bool,
- /// Indicates whether the encrypted volume is active.
+ #[doc = " Indicates whether the encrypted volume is active."]
pub encrypted_volume_active: bool,
- /// Indicates whether the hidden volume is read-only.
+ #[doc = " Indicates whether the hidden volume is read-only."]
pub hidden_volume_read_only: bool,
- /// Indicates whether the hidden volume is active.
+ #[doc = " Indicates whether the hidden volume is active."]
pub hidden_volume_active: bool,
- /// The major firmware version, e. g. 0 in v0.40.
+ #[doc = " The major firmware version, e. g. 0 in v0.40."]
pub firmware_version_major: u8,
- /// The minor firmware version, e. g. 40 in v0.40.
+ #[doc = " The minor firmware version, e. g. 40 in v0.40."]
pub firmware_version_minor: u8,
- /// Indicates whether the firmware is locked.
+ #[doc = " Indicates whether the firmware is locked."]
pub firmware_locked: bool,
- /// The serial number of the SD card in the Storage stick.
+ #[doc = " The serial number of the SD card in the Storage stick."]
pub serial_number_sd_card: u32,
- /// The serial number of the smart card in the Storage stick.
+ #[doc = " The serial number of the smart card in the Storage stick."]
pub serial_number_smart_card: u32,
- /// The number of remaining login attempts for the user PIN.
+ #[doc = " The number of remaining login attempts for the user PIN."]
pub user_retry_count: u8,
- /// The number of remaining login attempts for the admin PIN.
+ #[doc = " The number of remaining login attempts for the admin PIN."]
pub admin_retry_count: u8,
- /// Indicates whether a new SD card was found.
+ #[doc = " Indicates whether a new SD card was found."]
pub new_sd_card_found: bool,
- /// Indicates whether the SD card is filled with random characters.
+ #[doc = " Indicates whether the SD card is filled with random characters."]
pub filled_with_random: bool,
- /// Indicates whether the stick has been initialized by generating
- /// the AES keys.
+ #[doc = " Indicates whether the stick has been initialized by generating"]
+ #[doc = " the AES keys."]
pub stick_initialized: bool,
}
#[test]
@@ -446,15 +445,15 @@ fn bindgen_test_layout_NK_storage_status() {
)
);
}
-/// Data about the usage of the SD card.
+#[doc = " Data about the usage of the SD card."]
#[repr(C)]
#[derive(Debug, Copy, Clone)]
pub struct NK_SD_usage_data {
- /// The minimum write level, as a percentage of the total card
- /// size.
+ #[doc = " The minimum write level, as a percentage of the total card"]
+ #[doc = " size."]
pub write_level_min: u8,
- /// The maximum write level, as a percentage of the total card
- /// size.
+ #[doc = " The maximum write level, as a percentage of the total card"]
+ #[doc = " size."]
pub write_level_max: u8,
}
#[test]
@@ -698,155 +697,155 @@ extern "C" {
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Set debug level of messages written on stderr
- /// @param state state=True - most messages, state=False - only errors level
+ #[doc = " Set debug level of messages written on stderr"]
+ #[doc = " @param state state=True - most messages, state=False - only errors level"]
pub fn NK_set_debug(state: bool);
}
extern "C" {
- /// Set debug level of messages written on stderr
- /// @param level (int) 0-lowest verbosity, 5-highest verbosity
+ #[doc = " Set debug level of messages written on stderr"]
+ #[doc = " @param level (int) 0-lowest verbosity, 5-highest verbosity"]
pub fn NK_set_debug_level(level: ::std::os::raw::c_int);
}
extern "C" {
- /// Get the major library version, e. g. the 3 in v3.2.
- /// @return the major library version
+ #[doc = " Get the major library version, e. g. the 3 in v3.2."]
+ #[doc = " @return the major library version"]
pub fn NK_get_major_library_version() -> ::std::os::raw::c_uint;
}
extern "C" {
- /// Get the minor library version, e. g. the 2 in v3.2.
- /// @return the minor library version
+ #[doc = " Get the minor library version, e. g. the 2 in v3.2."]
+ #[doc = " @return the minor library version"]
pub fn NK_get_minor_library_version() -> ::std::os::raw::c_uint;
}
extern "C" {
- /// Get the library version as a string. This is the output of
- /// `git describe --always` at compile time, for example "v3.3" or
- /// "v3.3-19-gaee920b".
- /// The return value is a string literal and must not be freed.
- /// @return the library version as a string
+ #[doc = " Get the library version as a string. This is the output of"]
+ #[doc = " `git describe --always` at compile time, for example \"v3.3\" or"]
+ #[doc = " \"v3.3-19-gaee920b\"."]
+ #[doc = " The return value is a string literal and must not be freed."]
+ #[doc = " @return the library version as a string"]
pub fn NK_get_library_version() -> *const ::std::os::raw::c_char;
}
extern "C" {
- /// Connect to device of given model. Currently library can be connected only to one device at once.
- /// @param device_model char 'S': Nitrokey Storage, 'P': Nitrokey Pro
- /// @return 1 if connected, 0 if wrong model or cannot connect
+ #[doc = " Connect to device of given model. Currently library can be connected only to one device at once."]
+ #[doc = " @param device_model char 'S': Nitrokey Storage, 'P': Nitrokey Pro"]
+ #[doc = " @return 1 if connected, 0 if wrong model or cannot connect"]
pub fn NK_login(device_model: *const ::std::os::raw::c_char) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Connect to device of given model. Currently library can be connected only to one device at once.
- /// @param device_model NK_device_model: NK_PRO: Nitrokey Pro, NK_STORAGE: Nitrokey Storage
- /// @return 1 if connected, 0 if wrong model or cannot connect
+ #[doc = " Connect to device of given model. Currently library can be connected only to one device at once."]
+ #[doc = " @param device_model NK_device_model: NK_PRO: Nitrokey Pro, NK_STORAGE: Nitrokey Storage"]
+ #[doc = " @return 1 if connected, 0 if wrong model or cannot connect"]
pub fn NK_login_enum(device_model: NK_device_model) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Connect to first available device, starting checking from Pro 1st to Storage 2nd.
- /// @return 1 if connected, 0 if wrong model or cannot connect
+ #[doc = " Connect to first available device, starting checking from Pro 1st to Storage 2nd."]
+ #[doc = " @return 1 if connected, 0 if wrong model or cannot connect"]
pub fn NK_login_auto() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Disconnect from the device.
- /// @return command processing error code
+ #[doc = " Disconnect from the device."]
+ #[doc = " @return command processing error code"]
pub fn NK_logout() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Query the model of the connected device.
- /// Returns the model of the connected device or NK_DISCONNECTED.
- ///
- /// @return true if a device is connected and the out argument has been set
+ #[doc = " Query the model of the connected device."]
+ #[doc = " Returns the model of the connected device or NK_DISCONNECTED."]
+ #[doc = ""]
+ #[doc = " @return true if a device is connected and the out argument has been set"]
pub fn NK_get_device_model() -> NK_device_model;
}
extern "C" {
- /// Return the debug status string. Debug purposes. This function is
- /// deprecated in favor of NK_get_status_as_string.
- /// @return string representation of the status or an empty string
- /// if the command failed
+ #[doc = " Return the debug status string. Debug purposes. This function is"]
+ #[doc = " deprecated in favor of NK_get_status_as_string."]
+ #[doc = " @return string representation of the status or an empty string"]
+ #[doc = " if the command failed"]
#[deprecated(since = "3.5.0", note="use `NK_get_status_as_string` instead")]
pub fn NK_status() -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Return the debug status string. Debug purposes.
- /// @return string representation of the status or an empty string
- /// if the command failed
+ #[doc = " Return the debug status string. Debug purposes."]
+ #[doc = " @return string representation of the status or an empty string"]
+ #[doc = " if the command failed"]
pub fn NK_get_status_as_string() -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get the stick status common to all Nitrokey devices and return the
- /// command processing error code. If the code is zero, i. e. the
- /// command was successful, the storage status is written to the output
- /// pointer's target. The output pointer must not be null.
- ///
- /// @param out the output pointer for the status
- /// @return command processing error code
+ #[doc = " Get the stick status common to all Nitrokey devices and return the"]
+ #[doc = " command processing error code. If the code is zero, i. e. the"]
+ #[doc = " command was successful, the storage status is written to the output"]
+ #[doc = " pointer's target. The output pointer must not be null."]
+ #[doc = ""]
+ #[doc = " @param out the output pointer for the status"]
+ #[doc = " @return command processing error code"]
pub fn NK_get_status(out: *mut NK_status) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Return the device's serial number string in hex.
- /// @return string device's serial number in hex
+ #[doc = " Return the device's serial number string in hex."]
+ #[doc = " @return string device's serial number in hex"]
pub fn NK_device_serial_number() -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get last command processing status. Useful for commands which returns the results of their own and could not return
- /// an error code.
- /// @return previous command processing error code
+ #[doc = " Get last command processing status. Useful for commands which returns the results of their own and could not return"]
+ #[doc = " an error code."]
+ #[doc = " @return previous command processing error code"]
pub fn NK_get_last_command_status() -> u8;
}
extern "C" {
- /// Lock device - cancel any user device unlocking.
- /// @return command processing error code
+ #[doc = " Lock device - cancel any user device unlocking."]
+ #[doc = " @return command processing error code"]
pub fn NK_lock_device() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Authenticates the user on USER privilages with user_password and sets user's temporary password on device to user_temporary_password.
- /// @param user_password char[25] current user password
- /// @param user_temporary_password char[25] user temporary password to be set on device for further communication (authentication command)
- /// @return command processing error code
+ #[doc = " Authenticates the user on USER privilages with user_password and sets user's temporary password on device to user_temporary_password."]
+ #[doc = " @param user_password char[25] current user password"]
+ #[doc = " @param user_temporary_password char[25] user temporary password to be set on device for further communication (authentication command)"]
+ #[doc = " @return command processing error code"]
pub fn NK_user_authenticate(
user_password: *const ::std::os::raw::c_char,
user_temporary_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Authenticates the user on ADMIN privilages with admin_password and sets user's temporary password on device to admin_temporary_password.
- /// @param admin_password char[25] current administrator PIN
- /// @param admin_temporary_password char[25] admin temporary password to be set on device for further communication (authentication command)
- /// @return command processing error code
+ #[doc = " Authenticates the user on ADMIN privilages with admin_password and sets user's temporary password on device to admin_temporary_password."]
+ #[doc = " @param admin_password char[25] current administrator PIN"]
+ #[doc = " @param admin_temporary_password char[25] admin temporary password to be set on device for further communication (authentication command)"]
+ #[doc = " @return command processing error code"]
pub fn NK_first_authenticate(
admin_password: *const ::std::os::raw::c_char,
admin_temporary_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Execute a factory reset.
- /// @param admin_password char[20] current administrator PIN
- /// @return command processing error code
+ #[doc = " Execute a factory reset."]
+ #[doc = " @param admin_password char[20] current administrator PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_factory_reset(admin_password: *const ::std::os::raw::c_char)
-> ::std::os::raw::c_int;
}
extern "C" {
- /// Generates AES key on the device
- /// @param admin_password char[20] current administrator PIN
- /// @return command processing error code
+ #[doc = " Generates AES key on the device"]
+ #[doc = " @param admin_password char[20] current administrator PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_build_aes_key(admin_password: *const ::std::os::raw::c_char)
-> ::std::os::raw::c_int;
}
extern "C" {
- /// Unlock user PIN locked after 3 incorrect codes tries.
- /// @param admin_password char[20] current administrator PIN
- /// @return command processing error code
+ #[doc = " Unlock user PIN locked after 3 incorrect codes tries."]
+ #[doc = " @param admin_password char[20] current administrator PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_unlock_user_password(
admin_password: *const ::std::os::raw::c_char,
new_user_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Write general config to the device
- /// @param numlock set value in range [0-1] to send HOTP code from slot 'numlock' after double pressing numlock
- /// or outside the range to disable this function
- /// @param capslock similar to numlock but with capslock
- /// @param scrolllock similar to numlock but with scrolllock
- /// @param enable_user_password set True to enable OTP PIN protection (require PIN each OTP code request)
- /// @param delete_user_password (unused)
- /// @param admin_temporary_password current admin temporary password
- /// @return command processing error code
+ #[doc = " Write general config to the device"]
+ #[doc = " @param numlock set value in range [0-1] to send HOTP code from slot 'numlock' after double pressing numlock"]
+ #[doc = " or outside the range to disable this function"]
+ #[doc = " @param capslock similar to numlock but with capslock"]
+ #[doc = " @param scrolllock similar to numlock but with scrolllock"]
+ #[doc = " @param enable_user_password set True to enable OTP PIN protection (require PIN each OTP code request)"]
+ #[doc = " @param delete_user_password (unused)"]
+ #[doc = " @param admin_temporary_password current admin temporary password"]
+ #[doc = " @return command processing error code"]
pub fn NK_write_config(
numlock: u8,
capslock: u8,
@@ -857,60 +856,61 @@ extern "C" {
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get currently set config - status of function Numlock/Capslock/Scrollock OTP sending and is enabled PIN protected OTP
- /// @see NK_write_config
- /// @return uint8_t general_config[5]:
- /// uint8_t numlock;
- /// uint8_t capslock;
- /// uint8_t scrolllock;
- /// uint8_t enable_user_password;
- /// uint8_t delete_user_password;
+ #[doc = " Get currently set config - status of function Numlock/Capslock/Scrollock OTP sending and is enabled PIN protected OTP"]
+ #[doc = " @see NK_write_config"]
+ #[doc = " @return uint8_t general_config[5]:"]
+ #[doc = " uint8_t numlock;"]
+ #[doc = "uint8_t capslock;"]
+ #[doc = "uint8_t scrolllock;"]
+ #[doc = "uint8_t enable_user_password;"]
+ #[doc = "uint8_t delete_user_password;"]
+ #[doc = ""]
pub fn NK_read_config() -> *mut u8;
}
extern "C" {
- /// Get name of given TOTP slot
- /// @param slot_number TOTP slot number, slot_number<15
- /// @return char[20] the name of the slot
+ #[doc = " Get name of given TOTP slot"]
+ #[doc = " @param slot_number TOTP slot number, slot_number<15"]
+ #[doc = " @return char[20] the name of the slot"]
pub fn NK_get_totp_slot_name(slot_number: u8) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// @param slot_number HOTP slot number, slot_number<3
- /// @return char[20] the name of the slot
+ #[doc = " @param slot_number HOTP slot number, slot_number<3"]
+ #[doc = " @return char[20] the name of the slot"]
pub fn NK_get_hotp_slot_name(slot_number: u8) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Erase HOTP slot data from the device
- /// @param slot_number HOTP slot number, slot_number<3
- /// @param temporary_password admin temporary password
- /// @return command processing error code
+ #[doc = " Erase HOTP slot data from the device"]
+ #[doc = " @param slot_number HOTP slot number, slot_number<3"]
+ #[doc = " @param temporary_password admin temporary password"]
+ #[doc = " @return command processing error code"]
pub fn NK_erase_hotp_slot(
slot_number: u8,
temporary_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Erase TOTP slot data from the device
- /// @param slot_number TOTP slot number, slot_number<15
- /// @param temporary_password admin temporary password
- /// @return command processing error code
+ #[doc = " Erase TOTP slot data from the device"]
+ #[doc = " @param slot_number TOTP slot number, slot_number<15"]
+ #[doc = " @param temporary_password admin temporary password"]
+ #[doc = " @return command processing error code"]
pub fn NK_erase_totp_slot(
slot_number: u8,
temporary_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Write HOTP slot data to the device
- /// @param slot_number HOTP slot number, slot_number<3, 0-numbered
- /// @param slot_name char[15] desired slot name. C string (requires ending '\0'; 16 bytes).
- /// @param secret char[40] 160-bit or 320-bit (currently Pro v0.8 only) secret as a hex string. C string (requires ending '\0'; 41 bytes).
- /// See NitrokeyManager::is_320_OTP_secret_supported.
- /// @param hotp_counter uint32_t starting value of HOTP counter
- /// @param use_8_digits should returned codes be 6 (false) or 8 digits (true)
- /// @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock
- /// @param use_tokenID @see token_ID
- /// @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section
- /// @param temporary_password char[25] admin temporary password
- /// @return command processing error code
+ #[doc = " Write HOTP slot data to the device"]
+ #[doc = " @param slot_number HOTP slot number, slot_number<3, 0-numbered"]
+ #[doc = " @param slot_name char[15] desired slot name. C string (requires ending '\\0'; 16 bytes)."]
+ #[doc = " @param secret char[40] 160-bit or 320-bit (currently Pro v0.8 only) secret as a hex string. C string (requires ending '\\0'; 41 bytes)."]
+ #[doc = " See NitrokeyManager::is_320_OTP_secret_supported."]
+ #[doc = " @param hotp_counter uint32_t starting value of HOTP counter"]
+ #[doc = " @param use_8_digits should returned codes be 6 (false) or 8 digits (true)"]
+ #[doc = " @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock"]
+ #[doc = " @param use_tokenID @see token_ID"]
+ #[doc = " @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section"]
+ #[doc = " @param temporary_password char[25] admin temporary password"]
+ #[doc = " @return command processing error code"]
pub fn NK_write_hotp_slot(
slot_number: u8,
slot_name: *const ::std::os::raw::c_char,
@@ -924,18 +924,18 @@ extern "C" {
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Write TOTP slot data to the device
- /// @param slot_number TOTP slot number, slot_number<15, 0-numbered
- /// @param slot_name char[15] desired slot name. C string (requires ending '\0'; 16 bytes).
- /// @param secret char[40] 160-bit or 320-bit (currently Pro v0.8 only) secret as a hex string. C string (requires ending '\0'; 41 bytes).
- /// See NitrokeyManager::is_320_OTP_secret_supported.
- /// @param time_window uint16_t time window for this TOTP
- /// @param use_8_digits should returned codes be 6 (false) or 8 digits (true)
- /// @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock
- /// @param use_tokenID @see token_ID
- /// @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section
- /// @param temporary_password char[20] admin temporary password
- /// @return command processing error code
+ #[doc = " Write TOTP slot data to the device"]
+ #[doc = " @param slot_number TOTP slot number, slot_number<15, 0-numbered"]
+ #[doc = " @param slot_name char[15] desired slot name. C string (requires ending '\\0'; 16 bytes)."]
+ #[doc = " @param secret char[40] 160-bit or 320-bit (currently Pro v0.8 only) secret as a hex string. C string (requires ending '\\0'; 41 bytes)."]
+ #[doc = " See NitrokeyManager::is_320_OTP_secret_supported."]
+ #[doc = " @param time_window uint16_t time window for this TOTP"]
+ #[doc = " @param use_8_digits should returned codes be 6 (false) or 8 digits (true)"]
+ #[doc = " @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock"]
+ #[doc = " @param use_tokenID @see token_ID"]
+ #[doc = " @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section"]
+ #[doc = " @param temporary_password char[20] admin temporary password"]
+ #[doc = " @return command processing error code"]
pub fn NK_write_totp_slot(
slot_number: u8,
slot_name: *const ::std::os::raw::c_char,
@@ -949,29 +949,29 @@ extern "C" {
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get HOTP code from the device
- /// @param slot_number HOTP slot number, slot_number<3
- /// @return HOTP code
+ #[doc = " Get HOTP code from the device"]
+ #[doc = " @param slot_number HOTP slot number, slot_number<3"]
+ #[doc = " @return HOTP code"]
pub fn NK_get_hotp_code(slot_number: u8) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get HOTP code from the device (PIN protected)
- /// @param slot_number HOTP slot number, slot_number<3
- /// @param user_temporary_password char[25] user temporary password if PIN protected OTP codes are enabled,
- /// otherwise should be set to empty string - ''
- /// @return HOTP code
+ #[doc = " Get HOTP code from the device (PIN protected)"]
+ #[doc = " @param slot_number HOTP slot number, slot_number<3"]
+ #[doc = " @param user_temporary_password char[25] user temporary password if PIN protected OTP codes are enabled,"]
+ #[doc = " otherwise should be set to empty string - ''"]
+ #[doc = " @return HOTP code"]
pub fn NK_get_hotp_code_PIN(
slot_number: u8,
user_temporary_password: *const ::std::os::raw::c_char,
) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get TOTP code from the device
- /// @param slot_number TOTP slot number, slot_number<15
- /// @param challenge TOTP challenge -- unused
- /// @param last_totp_time last time -- unused
- /// @param last_interval last interval --unused
- /// @return TOTP code
+ #[doc = " Get TOTP code from the device"]
+ #[doc = " @param slot_number TOTP slot number, slot_number<15"]
+ #[doc = " @param challenge TOTP challenge -- unused"]
+ #[doc = " @param last_totp_time last time -- unused"]
+ #[doc = " @param last_interval last interval --unused"]
+ #[doc = " @return TOTP code"]
pub fn NK_get_totp_code(
slot_number: u8,
challenge: u64,
@@ -980,14 +980,14 @@ extern "C" {
) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get TOTP code from the device (PIN protected)
- /// @param slot_number TOTP slot number, slot_number<15
- /// @param challenge TOTP challenge -- unused
- /// @param last_totp_time last time -- unused
- /// @param last_interval last interval -- unused
- /// @param user_temporary_password char[25] user temporary password if PIN protected OTP codes are enabled,
- /// otherwise should be set to empty string - ''
- /// @return TOTP code
+ #[doc = " Get TOTP code from the device (PIN protected)"]
+ #[doc = " @param slot_number TOTP slot number, slot_number<15"]
+ #[doc = " @param challenge TOTP challenge -- unused"]
+ #[doc = " @param last_totp_time last time -- unused"]
+ #[doc = " @param last_interval last interval -- unused"]
+ #[doc = " @param user_temporary_password char[25] user temporary password if PIN protected OTP codes are enabled,"]
+ #[doc = " otherwise should be set to empty string - ''"]
+ #[doc = " @return TOTP code"]
pub fn NK_get_totp_code_PIN(
slot_number: u8,
challenge: u64,
@@ -997,20 +997,20 @@ extern "C" {
) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Set time on the device (for TOTP requests)
- /// @param time seconds in unix epoch (from 01.01.1970)
- /// @return command processing error code
+ #[doc = " Set time on the device (for TOTP requests)"]
+ #[doc = " @param time seconds in unix epoch (from 01.01.1970)"]
+ #[doc = " @return command processing error code"]
pub fn NK_totp_set_time(time: u64) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Set the device time used for TOTP to the given time. Contrary to
- /// {@code set_time(uint64_t)}, this command fails if {@code old_time}
- /// &gt; {@code time} or if {@code old_time} is zero (where {@code
- /// old_time} is the current time on the device).
- ///
- /// @param time new device time as Unix timestamp (seconds since
- /// 1970-01-01)
- /// @return command processing error code
+ #[doc = " Set the device time used for TOTP to the given time. Contrary to"]
+ #[doc = " {@code set_time(uint64_t)}, this command fails if {@code old_time}"]
+ #[doc = " &gt; {@code time} or if {@code old_time} is zero (where {@code"]
+ #[doc = " old_time} is the current time on the device)."]
+ #[doc = ""]
+ #[doc = " @param time new device time as Unix timestamp (seconds since"]
+ #[doc = " 1970-01-01)"]
+ #[doc = " @return command processing error code"]
pub fn NK_totp_set_time_soft(time: u64) -> ::std::os::raw::c_int;
}
extern "C" {
@@ -1018,73 +1018,73 @@ extern "C" {
pub fn NK_totp_get_time() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Change administrator PIN
- /// @param current_PIN char[25] current PIN
- /// @param new_PIN char[25] new PIN
- /// @return command processing error code
+ #[doc = " Change administrator PIN"]
+ #[doc = " @param current_PIN char[25] current PIN"]
+ #[doc = " @param new_PIN char[25] new PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_change_admin_PIN(
current_PIN: *const ::std::os::raw::c_char,
new_PIN: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Change user PIN
- /// @param current_PIN char[25] current PIN
- /// @param new_PIN char[25] new PIN
- /// @return command processing error code
+ #[doc = " Change user PIN"]
+ #[doc = " @param current_PIN char[25] current PIN"]
+ #[doc = " @param new_PIN char[25] new PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_change_user_PIN(
current_PIN: *const ::std::os::raw::c_char,
new_PIN: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get retry count of user PIN
- /// @return user PIN retry count
+ #[doc = " Get retry count of user PIN"]
+ #[doc = " @return user PIN retry count"]
pub fn NK_get_user_retry_count() -> u8;
}
extern "C" {
- /// Get retry count of admin PIN
- /// @return admin PIN retry count
+ #[doc = " Get retry count of admin PIN"]
+ #[doc = " @return admin PIN retry count"]
pub fn NK_get_admin_retry_count() -> u8;
}
extern "C" {
- /// Enable password safe access
- /// @param user_pin char[30] current user PIN
- /// @return command processing error code
+ #[doc = " Enable password safe access"]
+ #[doc = " @param user_pin char[30] current user PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_enable_password_safe(
user_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get password safe slots' status
- /// @return uint8_t[16] slot statuses - each byte represents one slot with 0 (not programmed) and 1 (programmed)
+ #[doc = " Get password safe slots' status"]
+ #[doc = " @return uint8_t[16] slot statuses - each byte represents one slot with 0 (not programmed) and 1 (programmed)"]
pub fn NK_get_password_safe_slot_status() -> *mut u8;
}
extern "C" {
- /// Get password safe slot name
- /// @param slot_number password safe slot number, slot_number<16
- /// @return slot name
+ #[doc = " Get password safe slot name"]
+ #[doc = " @param slot_number password safe slot number, slot_number<16"]
+ #[doc = " @return slot name"]
pub fn NK_get_password_safe_slot_name(slot_number: u8) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get password safe slot login
- /// @param slot_number password safe slot number, slot_number<16
- /// @return login from the PWS slot
+ #[doc = " Get password safe slot login"]
+ #[doc = " @param slot_number password safe slot number, slot_number<16"]
+ #[doc = " @return login from the PWS slot"]
pub fn NK_get_password_safe_slot_login(slot_number: u8) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get the password safe slot password
- /// @param slot_number password safe slot number, slot_number<16
- /// @return password from the PWS slot
+ #[doc = " Get the password safe slot password"]
+ #[doc = " @param slot_number password safe slot number, slot_number<16"]
+ #[doc = " @return password from the PWS slot"]
pub fn NK_get_password_safe_slot_password(slot_number: u8) -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Write password safe data to the slot
- /// @param slot_number password safe slot number, slot_number<16
- /// @param slot_name char[11] name of the slot
- /// @param slot_login char[32] login string
- /// @param slot_password char[20] password string
- /// @return command processing error code
+ #[doc = " Write password safe data to the slot"]
+ #[doc = " @param slot_number password safe slot number, slot_number<16"]
+ #[doc = " @param slot_name char[11] name of the slot"]
+ #[doc = " @param slot_login char[32] login string"]
+ #[doc = " @param slot_password char[20] password string"]
+ #[doc = " @return command processing error code"]
pub fn NK_write_password_safe_slot(
slot_number: u8,
slot_name: *const ::std::os::raw::c_char,
@@ -1093,81 +1093,81 @@ extern "C" {
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Erase the password safe slot from the device
- /// @param slot_number password safe slot number, slot_number<16
- /// @return command processing error code
+ #[doc = " Erase the password safe slot from the device"]
+ #[doc = " @param slot_number password safe slot number, slot_number<16"]
+ #[doc = " @return command processing error code"]
pub fn NK_erase_password_safe_slot(slot_number: u8) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Check whether AES is supported by the device
- /// @return 0 for no and 1 for yes
+ #[doc = " Check whether AES is supported by the device"]
+ #[doc = " @return 0 for no and 1 for yes"]
pub fn NK_is_AES_supported(
user_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get device's major firmware version
- /// @return major part of the version number (e.g. 0 from 0.48, 0 from 0.7 etc.)
+ #[doc = " Get device's major firmware version"]
+ #[doc = " @return major part of the version number (e.g. 0 from 0.48, 0 from 0.7 etc.)"]
pub fn NK_get_major_firmware_version() -> u8;
}
extern "C" {
- /// Get device's minor firmware version
- /// @return minor part of the version number (e.g. 7 from 0.7, 48 from 0.48 etc.)
+ #[doc = " Get device's minor firmware version"]
+ #[doc = " @return minor part of the version number (e.g. 7 from 0.7, 48 from 0.48 etc.)"]
pub fn NK_get_minor_firmware_version() -> u8;
}
extern "C" {
- /// Function to determine unencrypted volume PIN type
- /// @param minor_firmware_version
- /// @return Returns 1, if set unencrypted volume ro/rw pin type is User, 0 otherwise.
+ #[doc = " Function to determine unencrypted volume PIN type"]
+ #[doc = " @param minor_firmware_version"]
+ #[doc = " @return Returns 1, if set unencrypted volume ro/rw pin type is User, 0 otherwise."]
pub fn NK_set_unencrypted_volume_rorw_pin_type_user() -> ::std::os::raw::c_int;
}
extern "C" {
- /// This command is typically run to initiate
- /// communication with the device (altough not required).
- /// It sets time on device and returns its current status
- /// - a combination of set_time and get_status_storage commands
- /// Storage only
- /// @param seconds_from_epoch date and time expressed in seconds
+ #[doc = " This command is typically run to initiate"]
+ #[doc = " communication with the device (altough not required)."]
+ #[doc = " It sets time on device and returns its current status"]
+ #[doc = " - a combination of set_time and get_status_storage commands"]
+ #[doc = " Storage only"]
+ #[doc = " @param seconds_from_epoch date and time expressed in seconds"]
pub fn NK_send_startup(seconds_from_epoch: u64) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Unlock encrypted volume.
- /// Storage only
- /// @param user_pin user pin 20 characters
- /// @return command processing error code
+ #[doc = " Unlock encrypted volume."]
+ #[doc = " Storage only"]
+ #[doc = " @param user_pin user pin 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_unlock_encrypted_volume(
user_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Locks encrypted volume
- /// @return command processing error code
+ #[doc = " Locks encrypted volume"]
+ #[doc = " @return command processing error code"]
pub fn NK_lock_encrypted_volume() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Unlock hidden volume and lock encrypted volume.
- /// Requires encrypted volume to be unlocked.
- /// Storage only
- /// @param hidden_volume_password 20 characters
- /// @return command processing error code
+ #[doc = " Unlock hidden volume and lock encrypted volume."]
+ #[doc = " Requires encrypted volume to be unlocked."]
+ #[doc = " Storage only"]
+ #[doc = " @param hidden_volume_password 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_unlock_hidden_volume(
hidden_volume_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Locks hidden volume
- /// @return command processing error code
+ #[doc = " Locks hidden volume"]
+ #[doc = " @return command processing error code"]
pub fn NK_lock_hidden_volume() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Create hidden volume.
- /// Requires encrypted volume to be unlocked.
- /// Storage only
- /// @param slot_nr slot number in range 0-3
- /// @param start_percent volume begin expressed in percent of total available storage, int in range 0-99
- /// @param end_percent volume end expressed in percent of total available storage, int in range 1-100
- /// @param hidden_volume_password 20 characters
- /// @return command processing error code
+ #[doc = " Create hidden volume."]
+ #[doc = " Requires encrypted volume to be unlocked."]
+ #[doc = " Storage only"]
+ #[doc = " @param slot_nr slot number in range 0-3"]
+ #[doc = " @param start_percent volume begin expressed in percent of total available storage, int in range 0-99"]
+ #[doc = " @param end_percent volume end expressed in percent of total available storage, int in range 1-100"]
+ #[doc = " @param hidden_volume_password 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_create_hidden_volume(
slot_nr: u8,
start_percent: u8,
@@ -1176,240 +1176,240 @@ extern "C" {
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Make unencrypted volume read-only.
- /// Device hides unencrypted volume for a second therefore make sure
- /// buffers are flushed before running.
- /// Does nothing if firmware version is not matched
- /// Firmware range: Storage v0.50, v0.48 and below
- /// Storage only
- /// @param user_pin 20 characters User PIN
- /// @return command processing error code
+ #[doc = " Make unencrypted volume read-only."]
+ #[doc = " Device hides unencrypted volume for a second therefore make sure"]
+ #[doc = " buffers are flushed before running."]
+ #[doc = " Does nothing if firmware version is not matched"]
+ #[doc = " Firmware range: Storage v0.50, v0.48 and below"]
+ #[doc = " Storage only"]
+ #[doc = " @param user_pin 20 characters User PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_set_unencrypted_read_only(
user_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Make unencrypted volume read-write.
- /// Device hides unencrypted volume for a second therefore make sure
- /// buffers are flushed before running.
- /// Does nothing if firmware version is not matched
- /// Firmware range: Storage v0.50, v0.48 and below
- /// Storage only
- /// @param user_pin 20 characters User PIN
- /// @return command processing error code
+ #[doc = " Make unencrypted volume read-write."]
+ #[doc = " Device hides unencrypted volume for a second therefore make sure"]
+ #[doc = " buffers are flushed before running."]
+ #[doc = " Does nothing if firmware version is not matched"]
+ #[doc = " Firmware range: Storage v0.50, v0.48 and below"]
+ #[doc = " Storage only"]
+ #[doc = " @param user_pin 20 characters User PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_set_unencrypted_read_write(
user_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Make unencrypted volume read-only.
- /// Device hides unencrypted volume for a second therefore make sure
- /// buffers are flushed before running.
- /// Does nothing if firmware version is not matched
- /// Firmware range: Storage v0.49, v0.51+
- /// Storage only
- /// @param admin_pin 20 characters Admin PIN
- /// @return command processing error code
+ #[doc = " Make unencrypted volume read-only."]
+ #[doc = " Device hides unencrypted volume for a second therefore make sure"]
+ #[doc = " buffers are flushed before running."]
+ #[doc = " Does nothing if firmware version is not matched"]
+ #[doc = " Firmware range: Storage v0.49, v0.51+"]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters Admin PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_set_unencrypted_read_only_admin(
admin_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Make unencrypted volume read-write.
- /// Device hides unencrypted volume for a second therefore make sure
- /// buffers are flushed before running.
- /// Does nothing if firmware version is not matched
- /// Firmware range: Storage v0.49, v0.51+
- /// Storage only
- /// @param admin_pin 20 characters Admin PIN
- /// @return command processing error code
+ #[doc = " Make unencrypted volume read-write."]
+ #[doc = " Device hides unencrypted volume for a second therefore make sure"]
+ #[doc = " buffers are flushed before running."]
+ #[doc = " Does nothing if firmware version is not matched"]
+ #[doc = " Firmware range: Storage v0.49, v0.51+"]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters Admin PIN"]
+ #[doc = " @return command processing error code"]
pub fn NK_set_unencrypted_read_write_admin(
admin_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Make encrypted volume read-only.
- /// Device hides encrypted volume for a second therefore make sure
- /// buffers are flushed before running.
- /// Firmware range: v0.49 only, future (see firmware release notes)
- /// Storage only
- /// @param admin_pin 20 characters
- /// @return command processing error code
+ #[doc = " Make encrypted volume read-only."]
+ #[doc = " Device hides encrypted volume for a second therefore make sure"]
+ #[doc = " buffers are flushed before running."]
+ #[doc = " Firmware range: v0.49 only, future (see firmware release notes)"]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_set_encrypted_read_only(
admin_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Make encrypted volume read-write.
- /// Device hides encrypted volume for a second therefore make sure
- /// buffers are flushed before running.
- /// Firmware range: v0.49 only, future (see firmware release notes)
- /// Storage only
- /// @param admin_pin 20 characters
- /// @return command processing error code
+ #[doc = " Make encrypted volume read-write."]
+ #[doc = " Device hides encrypted volume for a second therefore make sure"]
+ #[doc = " buffers are flushed before running."]
+ #[doc = " Firmware range: v0.49 only, future (see firmware release notes)"]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_set_encrypted_read_write(
admin_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Exports device's firmware to unencrypted volume.
- /// Storage only
- /// @param admin_pin 20 characters
- /// @return command processing error code
+ #[doc = " Exports device's firmware to unencrypted volume."]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_export_firmware(admin_pin: *const ::std::os::raw::c_char) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Clear new SD card notification. It is set after factory reset.
- /// Storage only
- /// @param admin_pin 20 characters
- /// @return command processing error code
+ #[doc = " Clear new SD card notification. It is set after factory reset."]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_clear_new_sd_card_warning(
admin_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Fill SD card with random data.
- /// Should be done on first stick initialization after creating keys.
- /// Storage only
- /// @param admin_pin 20 characters
- /// @return command processing error code
+ #[doc = " Fill SD card with random data."]
+ #[doc = " Should be done on first stick initialization after creating keys."]
+ #[doc = " Storage only"]
+ #[doc = " @param admin_pin 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_fill_SD_card_with_random_data(
admin_pin: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Change update password.
- /// Update password is used for entering update mode, where firmware
- /// could be uploaded using dfu-programmer or other means.
- /// Storage only
- /// @param current_update_password 20 characters
- /// @param new_update_password 20 characters
- /// @return command processing error code
+ #[doc = " Change update password."]
+ #[doc = " Update password is used for entering update mode, where firmware"]
+ #[doc = " could be uploaded using dfu-programmer or other means."]
+ #[doc = " Storage only"]
+ #[doc = " @param current_update_password 20 characters"]
+ #[doc = " @param new_update_password 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_change_update_password(
current_update_password: *const ::std::os::raw::c_char,
new_update_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Enter update mode. Needs update password.
- /// When device is in update mode it no longer accepts any HID commands until
- /// firmware is launched (regardless of being updated or not).
- /// Smartcard (through CCID interface) and its all volumes are not visible as well.
- /// Its VID and PID are changed to factory-default (03eb:2ff1 Atmel Corp.)
- /// to be detected by flashing software. Result of this command can be reversed
- /// by using 'launch' command.
- /// For dfu-programmer it would be: 'dfu-programmer at32uc3a3256s launch'.
- /// Storage only
- /// @param update_password 20 characters
- /// @return command processing error code
+ #[doc = " Enter update mode. Needs update password."]
+ #[doc = " When device is in update mode it no longer accepts any HID commands until"]
+ #[doc = " firmware is launched (regardless of being updated or not)."]
+ #[doc = " Smartcard (through CCID interface) and its all volumes are not visible as well."]
+ #[doc = " Its VID and PID are changed to factory-default (03eb:2ff1 Atmel Corp.)"]
+ #[doc = " to be detected by flashing software. Result of this command can be reversed"]
+ #[doc = " by using 'launch' command."]
+ #[doc = " For dfu-programmer it would be: 'dfu-programmer at32uc3a3256s launch'."]
+ #[doc = " Storage only"]
+ #[doc = " @param update_password 20 characters"]
+ #[doc = " @return command processing error code"]
pub fn NK_enable_firmware_update(
update_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get Storage stick status as string.
- /// Storage only
- /// @return string with devices attributes
+ #[doc = " Get Storage stick status as string."]
+ #[doc = " Storage only"]
+ #[doc = " @return string with devices attributes"]
pub fn NK_get_status_storage_as_string() -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get the Storage stick status and return the command processing
- /// error code. If the code is zero, i. e. the command was successful,
- /// the storage status is written to the output pointer's target.
- /// The output pointer must not be null.
- ///
- /// @param out the output pointer for the storage status
- /// @return command processing error code
+ #[doc = " Get the Storage stick status and return the command processing"]
+ #[doc = " error code. If the code is zero, i. e. the command was successful,"]
+ #[doc = " the storage status is written to the output pointer's target."]
+ #[doc = " The output pointer must not be null."]
+ #[doc = ""]
+ #[doc = " @param out the output pointer for the storage status"]
+ #[doc = " @return command processing error code"]
pub fn NK_get_status_storage(out: *mut NK_storage_status) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get SD card usage attributes. Usable during hidden volumes creation.
- /// If the command was successful (return value 0), the usage data is
- /// written to the output pointer’s target. The output pointer must
- /// not be null.
- /// Storage only
- /// @param out the output pointer for the usage data
- /// @return command processing error code
+ #[doc = " Get SD card usage attributes. Usable during hidden volumes creation."]
+ #[doc = " If the command was successful (return value 0), the usage data is"]
+ #[doc = " written to the output pointer\u{2019}s target. The output pointer must"]
+ #[doc = " not be null."]
+ #[doc = " Storage only"]
+ #[doc = " @param out the output pointer for the usage data"]
+ #[doc = " @return command processing error code"]
pub fn NK_get_SD_usage_data(out: *mut NK_SD_usage_data) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Get SD card usage attributes as string.
- /// Usable during hidden volumes creation.
- /// Storage only
- /// @return string with SD card usage attributes
+ #[doc = " Get SD card usage attributes as string."]
+ #[doc = " Usable during hidden volumes creation."]
+ #[doc = " Storage only"]
+ #[doc = " @return string with SD card usage attributes"]
pub fn NK_get_SD_usage_data_as_string() -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Get progress value of current long operation.
- /// Storage only
- /// @return int in range 0-100 or -1 if device is not busy or -2 if an
- /// error occured
+ #[doc = " Get progress value of current long operation."]
+ #[doc = " Storage only"]
+ #[doc = " @return int in range 0-100 or -1 if device is not busy or -2 if an"]
+ #[doc = " error occured"]
pub fn NK_get_progress_bar_value() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Returns a list of connected devices' id's, delimited by ';' character. Empty string is returned on no device found.
- /// Each ID could consist of:
- /// 1. SC_id:SD_id_p_path (about 40 bytes)
- /// 2. path (about 10 bytes)
- /// where 'path' is USB path (bus:num), 'SC_id' is smartcard ID, 'SD_id' is storage card ID and
- /// '_p_' and ':' are field delimiters.
- /// Case 2 (USB path only) is used, when the device cannot be asked about its status data (e.g. during a long operation,
- /// like clearing SD card.
- /// Internally connects to all available devices and creates a map between ids and connection objects.
- /// Side effects: changes active device to last detected Storage device.
- /// Storage only
- /// @example Example of returned data: '00005d19:dacc2cb4_p_0001:0010:02;000037c7:4cf12445_p_0001:000f:02;0001:000c:02'
- /// @return string delimited id's of connected devices
+ #[doc = " Returns a list of connected devices' id's, delimited by ';' character. Empty string is returned on no device found."]
+ #[doc = " Each ID could consist of:"]
+ #[doc = " 1. SC_id:SD_id_p_path (about 40 bytes)"]
+ #[doc = " 2. path (about 10 bytes)"]
+ #[doc = " where 'path' is USB path (bus:num), 'SC_id' is smartcard ID, 'SD_id' is storage card ID and"]
+ #[doc = " '_p_' and ':' are field delimiters."]
+ #[doc = " Case 2 (USB path only) is used, when the device cannot be asked about its status data (e.g. during a long operation,"]
+ #[doc = " like clearing SD card."]
+ #[doc = " Internally connects to all available devices and creates a map between ids and connection objects."]
+ #[doc = " Side effects: changes active device to last detected Storage device."]
+ #[doc = " Storage only"]
+ #[doc = " @example Example of returned data: '00005d19:dacc2cb4_p_0001:0010:02;000037c7:4cf12445_p_0001:000f:02;0001:000c:02'"]
+ #[doc = " @return string delimited id's of connected devices"]
pub fn NK_list_devices_by_cpuID() -> *mut ::std::os::raw::c_char;
}
extern "C" {
- /// Returns a linked list of all connected devices, or null if no devices
- /// are connected or an error occured. The linked list must be freed by
- /// calling NK_free_device_info.
- /// @return a linked list of all connected devices
+ #[doc = " Returns a linked list of all connected devices, or null if no devices"]
+ #[doc = " are connected or an error occured. The linked list must be freed by"]
+ #[doc = " calling NK_free_device_info."]
+ #[doc = " @return a linked list of all connected devices"]
pub fn NK_list_devices() -> *mut NK_device_info;
}
extern "C" {
- /// Free a linked list returned by NK_list_devices.
- /// @param the linked list to free or null
+ #[doc = " Free a linked list returned by NK_list_devices."]
+ #[doc = " @param the linked list to free or null"]
pub fn NK_free_device_info(device_info: *mut NK_device_info);
}
extern "C" {
- /// Connects to the device with given ID. ID's list could be created with NK_list_devices_by_cpuID.
- /// Requires calling to NK_list_devices_by_cpuID first. Connecting to arbitrary ID/USB path is not handled.
- /// On connection requests status from device and disconnects it / removes from map on connection failure.
- /// Storage only
- /// @param id Target device ID (example: '00005d19:dacc2cb4_p_0001:0010:02')
- /// @return 1 on successful connection, 0 otherwise
+ #[doc = " Connects to the device with given ID. ID's list could be created with NK_list_devices_by_cpuID."]
+ #[doc = " Requires calling to NK_list_devices_by_cpuID first. Connecting to arbitrary ID/USB path is not handled."]
+ #[doc = " On connection requests status from device and disconnects it / removes from map on connection failure."]
+ #[doc = " Storage only"]
+ #[doc = " @param id Target device ID (example: '00005d19:dacc2cb4_p_0001:0010:02')"]
+ #[doc = " @return 1 on successful connection, 0 otherwise"]
pub fn NK_connect_with_ID(id: *const ::std::os::raw::c_char) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Connects to a device with the given path. The path is a USB device
- /// path as returned by hidapi.
- /// @param path the device path
- /// @return 1 on successful connection, 0 otherwise
+ #[doc = " Connects to a device with the given path. The path is a USB device"]
+ #[doc = " path as returned by hidapi."]
+ #[doc = " @param path the device path"]
+ #[doc = " @return 1 on successful connection, 0 otherwise"]
pub fn NK_connect_with_path(path: *const ::std::os::raw::c_char) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Blink red and green LED alternatively and infinitely (until device is reconnected).
- /// @return command processing error code
+ #[doc = " Blink red and green LED alternatively and infinitely (until device is reconnected)."]
+ #[doc = " @return command processing error code"]
pub fn NK_wink() -> ::std::os::raw::c_int;
}
extern "C" {
- /// Enable update mode on Nitrokey Pro.
- /// Supported from v0.11.
- /// @param update_password 20 bytes update password
- /// @return command processing error code
+ #[doc = " Enable update mode on Nitrokey Pro."]
+ #[doc = " Supported from v0.11."]
+ #[doc = " @param update_password 20 bytes update password"]
+ #[doc = " @return command processing error code"]
pub fn NK_enable_firmware_update_pro(
update_password: *const ::std::os::raw::c_char,
) -> ::std::os::raw::c_int;
}
extern "C" {
- /// Change update-mode password on Nitrokey Pro.
- /// Supported from v0.11.
- /// @param current_firmware_password 20 bytes update password
- /// @param new_firmware_password 20 bytes update password
- /// @return command processing error code
+ #[doc = " Change update-mode password on Nitrokey Pro."]
+ #[doc = " Supported from v0.11."]
+ #[doc = " @param current_firmware_password 20 bytes update password"]
+ #[doc = " @param new_firmware_password 20 bytes update password"]
+ #[doc = " @return command processing error code"]
pub fn NK_change_firmware_password_pro(
current_firmware_password: *const ::std::os::raw::c_char,
new_firmware_password: *const ::std::os::raw::c_char,