| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
| |
The clear_new_sd_card_warning method calls the libnitrokey
NK_clear_new_sd_card_warning function to reset the corresponding flag in
the Storage status.
|
| |
|
|
|
|
|
|
|
|
|
| |
The get_production_info method maps to the NK_get_production_info
function of libnitrokey. The Storage firmware supports two query modes:
with or without a write test. libnitrokey only performs the query
without write test, so the fields that are only set for the write test
are ignored in our implementation. This affects:
- user and admin retry counts
- smart card ID
- SD card size
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
The new set_unencrypted_volume_mode method sets the access mode of the
unencrypted volume on the Nitrokey Storage. Depending on the requested
access mode, it calls either NK_set_unencrypted_read_only_admin or
NK_set_unencrypted_read_write_admin.
Note that this function requires firmware version 0.51 or later.
(Earlier firmware versions used the user PIN.)
|
| |
|
|
|
|
| |
This patch adds the wink method to the Storage struct that lets the
Nitrokey device blink until reconnected. We do not test this method as
it does not change the state that we can observe.
|
| |
|
|
|
|
|
| |
This patch adds the get_library_version function to the main library
module that queries and returns the libnitrokey version. As the version
fields are static values, we fetch them all at the same time and do not
provide getters for the individual fields.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Three more error codes are defined in libnitrokey but currently reported
as the CommandError::Unknown variant:
200: representing a string that exceeds a limit
202: indicating a string that is not in hexadecimal format when it
should be
203: suggesting that the target buffer is smaller than the source
buffer and, hence, too small
This change introduces the CommandError variants StringTooLong,
InvalidHexString and TargetBufferTooSmall, respectively, representing
those errors.
|
| | |
|
| |
|
|
|
|
| |
This patch adds the global connect_model function that can be used to
connect to a Nitrokey device of a given model. Contrary to Pro::connect
and Storage::connect, the model does not have to be set at compile time.
|
| |
|
|
|
|
|
|
|
|
| |
This patch introduces the methods enable_hidden_volume,
disable_hidden_volume and create_hidden_volume for the Storage struct to
support the hidden volumes on the Nitrokey Storage. The enable and
create methods require that the encrypted storage has been enabled.
Contrary to authentication and password safe access, we do not enforce
this requirement in the API as file system operations could have
unwanted side effects and should not performed implicitly.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change is the first in a series to migrate the existing tests to
using the nitrokey-test crate. The crate provides a couple of benefits
over the existing way testing works:
- test execution is automatically serialized (i.e., no more need for
--test-threads)
- available devices are detected at runtime (i.e., no more need for
--features test-pro)
- tests capable of running only on a specific device are automatically
skipped if this device is not present
In addition to that, the crate also offers selection of particular
groups of tests by virtue of the NITROKEY_TEST_GROUP environment
variable. If set (valid values are "nodev", "pro", and "storage") only
tests of the particular group are run (those tests will fail if a
required precondition is not met, i.e., if a device is present but
"nodev" is set, or if the "pro" group is run but no device or a storage
device is present).
Unfortunately, it has some limitations as well. Most importantly Rust
does not allow us to indicate whether a test has been skipped or not.
While it has #[ignore] support, that strictly is a compile-time feature
and, hence, not usable.
This patch in particular pulls in the nitrokey-test crate and adjusts
the existing device tests to make use of it.
|
| | |
|
| |
|
|
|
|
|
|
| |
This patch adds the enable_firmware_update method to the Storage struct
that uses NK_enable_firmware_update to put the Nitrokey Storage into
update mode. This method is not tested as external tooling is required
to resume normal operation and as it is hard to bail out if an error
occurs.
|
| |
|
|
|
|
|
|
| |
This patch adds the build_aes_key method to the Device trait that uses
the NK_build_aes_key function to build new AES keys on the device. This
effectively resets the password safe and the encrypted storage. It is
unclear whether other data (e. g. the one-time passwords) are affected
too.
|
| |
|
|
|
|
|
| |
This patch adds the factory_reset_method to the Device trait that uses
the NK_factory_reset function to perform a factory reset. The tests
verify that the user and admin PIN are reset and that the OTP storage
and the password safe are deleted.
|
| |
|
|
|
|
| |
This patch adds the change_update_pin method to the Storage struct that
uses the NK_change_update_password function to set the password required
for firmware updates.
|
| | |
|
| |
|
|
|
| |
We switched to rand::thread_rng() which cannot fail. Therefore the
CommandError::RngError is no longer needed and removed in this patch.
|
| |
|
|
|
|
|
|
| |
This patch adds the force argument to the set_time method in the
ConfigureOtp trait that allows the user to choose whether jumps to the
past are allowed when updating the time. It is implemented by using the
NK_totp_set_time_soft function. Previously, jumps where unconditionally
allowed.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
As these three enums are scalar values, this patch derives the Clone and
Copy traits for them. This should avoid unnecessary allocations and
reduce the memory footprint.
|
| |
|
|
|
| |
This patch adds the function Device::get_model that returns the model of
the connected Nitrokey stick.
|
| | |
|
| |
|
|
|
|
|
| |
Currently, the test-no-device feature is used for tests that expect no
Nitrokey to be connected. Yet test-no-device is equivalent to not
test-pro and not test-storage. Therefore, this patch removes the
test-no-device feature.
|
| | |
|
| | |
|
| | |
|
| |
|
