aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* Add export_firmware method to StorageRobin Krahl2019-01-12
| | | | | | | The export_firmware method writes the firmware of the Nitrokey Storage to the unencrypted storage. We only test that the command succeeds as mounting the unencrypted storage and accessing the file is out of scope for the tests.
* Document unsupported outdated functionsRobin Krahl2019-01-12
| | | | | | | | | | We do not support old firmware versions on the Nitrokey Storage, so we document that these outdated functions are not supported: - NK_set_unencrypted_volume_rorw_pin_type_user - NK_set_unencrypted_read_only - NK_set_unencrypted_read_write - NK_set_encrypted_read_only - NK_set_encrypted_read_write
* Add set_unencrypted_volume_mode to StorageRobin Krahl2019-01-12
| | | | | | | | | | The new set_unencrypted_volume_mode method sets the access mode of the unencrypted volume on the Nitrokey Storage. Depending on the requested access mode, it calls either NK_set_unencrypted_read_only_admin or NK_set_unencrypted_read_write_admin. Note that this function requires firmware version 0.51 or later. (Earlier firmware versions used the user PIN.)
* Introduce VolumeMode enum in deviceRobin Krahl2019-01-12
| | | | | | The VolumeMode enum will be used when setting the access mode for the unencrypted volume. It can also be used when refactoring the VolumeStatus enum in a future release.
* Move the update PIN from tests/util to tests/deviceRobin Krahl2019-01-12
| | | | | | The update PIN is only used in the Storage tests, so it is moved from the common tests/util module to the tests/device module. This fixes compiler warnings when compiling the other test modules.
* Fix formatting in get_library_versionRobin Krahl2019-01-12
|
* Update readme and todo for NK_get_device_modelRobin Krahl2019-01-11
|
* Add the wink method to the Storage structRobin Krahl2019-01-11
| | | | | | This patch adds the wink method to the Storage struct that lets the Nitrokey device blink until reconnected. We do not test this method as it does not change the state that we can observe.
* Add the get_library_version functionRobin Krahl2019-01-11
| | | | | | | This patch adds the get_library_version function to the main library module that queries and returns the libnitrokey version. As the version fields are static values, we fetch them all at the same time and do not provide getters for the individual fields.
* Check InvalidHexString error in otp test suiteRobin Krahl2019-01-09
|
* Fix otp::totp_error test caseRobin Krahl2019-01-09
| | | | | Previously the totp_error test case in the otp test suite called hotp methods. This patch fixes the test case by calling totp metods instead.
* Do not check for errors in connect testsDaniel Mueller2019-01-09
| | | | | | | | | The connect_* device tests fail when run in a setup with a Pro and Storage stick present. The problem is that these tests assume only one stick to be present, and that the corresponding connect function for the other stick reports an error. However, in a two stick setup there is no such guarantee. This patch removes tests for those assumptions.
* Make three more error codes knownDaniel Mueller2019-01-09
| | | | | | | | | | | | | Three more error codes are defined in libnitrokey but currently reported as the CommandError::Unknown variant: 200: representing a string that exceeds a limit 202: indicating a string that is not in hexadecimal format when it should be 203: suggesting that the target buffer is smaller than the source buffer and, hence, too small This change introduces the CommandError variants StringTooLong, InvalidHexString and TargetBufferTooSmall, respectively, representing those errors.
* Release v0.3.1v0.3.1Robin Krahl2019-01-07
|
* Add the connect_model functionRobin Krahl2019-01-07
| | | | | | This patch adds the global connect_model function that can be used to connect to a Nitrokey device of a given model. Contrary to Pro::connect and Storage::connect, the model does not have to be set at compile time.
* Rename device::connect_model to device::connect_enumRobin Krahl2019-01-07
| | | | connect_model will be used for a public function with the next patch.
* Document the Undefined error for the connect methodsRobin Krahl2019-01-07
|
* Add support for the hidden volumes on a Nitrokey StorageRobin Krahl2019-01-06
| | | | | | | | | | This patch introduces the methods enable_hidden_volume, disable_hidden_volume and create_hidden_volume for the Storage struct to support the hidden volumes on the Nitrokey Storage. The enable and create methods require that the encrypted storage has been enabled. Contrary to authentication and password safe access, we do not enforce this requirement in the API as file system operations could have unwanted side effects and should not performed implicitly.
* Fix example for GenerateOtp::get_totp_codeRobin Krahl2019-01-05
|
* Update README after test refactoringRobin Krahl2019-01-05
|
* Prefer assert_eq over is_ok() checksDaniel Mueller2019-01-05
| | | | | | | | | | We experienced various problems running the tests and while they may or may not be caused by local setup issues, it is helpful to have more information than just an indication that an assertion (true/false) was violated. To that end, this change adjusts some of the assert!(<func>().is_ok()) to compare against Ok(()) instead. This way, if the result is not the Ok variant, the error code will get printed.
* Adjust PWS tests to use nitrokey-test crateDaniel Mueller2019-01-05
| | | | This change adjusts the PWS tests to use the nitrokey-test crate.
* Adjust OTP tests to use nitrokey-testDaniel Mueller2019-01-05
| | | | This change adjusts the OTP tests to use the nitrokey-test crate.
* Use nitrokey-test for nitrokey device testsDaniel Mueller2019-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is the first in a series to migrate the existing tests to using the nitrokey-test crate. The crate provides a couple of benefits over the existing way testing works: - test execution is automatically serialized (i.e., no more need for --test-threads) - available devices are detected at runtime (i.e., no more need for --features test-pro) - tests capable of running only on a specific device are automatically skipped if this device is not present In addition to that, the crate also offers selection of particular groups of tests by virtue of the NITROKEY_TEST_GROUP environment variable. If set (valid values are "nodev", "pro", and "storage") only tests of the particular group are run (those tests will fail if a required precondition is not met, i.e., if a device is present but "nodev" is set, or if the "pro" group is run but no device or a storage device is present). Unfortunately, it has some limitations as well. Most importantly Rust does not allow us to indicate whether a test has been skipped or not. While it has #[ignore] support, that strictly is a compile-time feature and, hence, not usable. This patch in particular pulls in the nitrokey-test crate and adjusts the existing device tests to make use of it.
* Release v0.3.0v0.3.0Robin Krahl2019-01-04
|
* Update documentation and test for factory_resetRobin Krahl2019-01-04
| | | | | | Contrary to my previous beliefs, build_aes_key has to be called even after a factory reset using the Nitrokey API. This patch updates the documentation and the unit tests based on this insight.
* Fix documentation test for Storage::change_update_pinRobin Krahl2019-01-04
|
* Add Storage::enable_firmware_update methodRobin Krahl2019-01-03
| | | | | | | | This patch adds the enable_firmware_update method to the Storage struct that uses NK_enable_firmware_update to put the Nitrokey Storage into update mode. This method is not tested as external tooling is required to resume normal operation and as it is hard to bail out if an error occurs.
* Add Device::build_aes_key methodRobin Krahl2019-01-03
| | | | | | | | This patch adds the build_aes_key method to the Device trait that uses the NK_build_aes_key function to build new AES keys on the device. This effectively resets the password safe and the encrypted storage. It is unclear whether other data (e. g. the one-time passwords) are affected too.
* Add Device::factory_reset methodRobin Krahl2019-01-03
| | | | | | | This patch adds the factory_reset_method to the Device trait that uses the NK_factory_reset function to perform a factory reset. The tests verify that the user and admin PIN are reset and that the OTP storage and the password safe are deleted.
* Add Storage::change_update_pin methodRobin Krahl2019-01-03
| | | | | | This patch adds the change_update_pin method to the Storage struct that uses the NK_change_update_password function to set the password required for firmware updates.
* Document decryption failure for get_password_safeRobin Krahl2019-01-03
| | | | | | After a factory reset, the password safe cannot be accessed as its secret cannot be decrypted. This patch improves the documentation for GetPasswordSafe::get_password_safe to reflect this behavior.
* Update changelogRobin Krahl2019-01-03
|
* Update documentation for pws methodsRobin Krahl2019-01-03
|
* Preserve unknown error code valuesDaniel Mueller2019-01-03
| | | | | | | | | | The CommandError::Unknown variant, which is used whenever a reported error code is not known, makes it close to impossible to determine the root cause of, say, a one-off error, because all information explaining what went wrong is discarded. With this change we adjust the Unknown variant to include the error report. In addition, we introduce a new CommandError variant, Undefined, that is used when no error code is available.
* Fix typo: occured -> occurredDaniel Mueller2019-01-03
|
* Extend unlock_user_pin testsRobin Krahl2019-01-03
| | | | | | This patch adds a test case that changes the PIN when calling unlock_user_pin. The previous test case only unlocked the current user PIN.
* Remove CommandError::RngErrorRobin Krahl2019-01-03
| | | | | We switched to rand::thread_rng() which cannot fail. Therefore the CommandError::RngError is no longer needed and removed in this patch.
* Add force argument to ConfigureOtp::set_timeRobin Krahl2019-01-02
| | | | | | | | This patch adds the force argument to the set_time method in the ConfigureOtp trait that allows the user to choose whether jumps to the past are allowed when updating the time. It is implemented by using the NK_totp_set_time_soft function. Previously, jumps where unconditionally allowed.
* Relax nitrokey-sys dependency to 3.4Robin Krahl2019-01-01
|
* Release v0.2.3v0.2.3Robin Krahl2018-12-31
|
* Release v0.2.2v0.2.2Robin Krahl2018-12-30
|
* Remove the Cargo.toml extract from READMERobin Krahl2018-12-30
| | | | | The Cargo.toml extract in the README does not provide any real value, but it adds maintenance effort. Therefore it is removed in this patch.
* Fix Storage volume detection for test casesRobin Krahl2018-12-30
| | | | | | It seems that with newer firmeware, the model string in the lsblk output is Nitrokey_Storage instead of Nitrokey Storage. Therefore this patch replaces underscores with spaces to account for both versions.
* Fix get_model implementation for StorageRobin Krahl2018-12-30
|
* Derive Clone and Copy for CommandError, LogLevel, OtpModeRobin Krahl2018-12-30
| | | | | | As these three enums are scalar values, this patch derives the Clone and Copy traits for them. This should avoid unnecessary allocations and reduce the memory footprint.
* Fix formatting using to rustfmtRobin Krahl2018-12-30
|
* Add function Device::get_modelRobin Krahl2018-12-30
| | | | | This patch adds the function Device::get_model that returns the model of the connected Nitrokey stick.
* Update the changelogRobin Krahl2018-12-16
|
* Update to rand v0.6Robin Krahl2018-12-16
| | | | | | | | This patch updates the rand dependecy to version 0.6. It also replaces the OsRng, which is guaranteed to use OS/hardware entropy, with the thread_rng, which is likely to use OS/hardware entropy as a seed. The choice of RNG and the handling of password should be reviewed at a later point.
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-23 17:59:06 +0000