aboutsummaryrefslogtreecommitdiff
path: root/tests/otp.rs
diff options
context:
space:
mode:
Diffstat (limited to 'tests/otp.rs')
-rw-r--r--tests/otp.rs121
1 files changed, 62 insertions, 59 deletions
diff --git a/tests/otp.rs b/tests/otp.rs
index fc0e79e..8ca8311 100644
--- a/tests/otp.rs
+++ b/tests/otp.rs
@@ -3,8 +3,7 @@
mod util;
-use std::fmt::Debug;
-use std::ops::Deref;
+use std::ops::DerefMut;
use nitrokey::{
Admin, Authenticate, CommandError, Config, ConfigureOtp, Device, GenerateOtp, LibraryError,
@@ -38,22 +37,19 @@ enum TotpTimestampSize {
U64,
}
-fn make_admin_test_device<T>(device: T) -> Admin<T>
+fn make_admin_test_device<'a, T>(device: &'a mut T) -> Admin<'a, T>
where
T: Device,
- (T, nitrokey::Error): Debug,
{
- device
- .authenticate_admin(ADMIN_PASSWORD)
- .expect("Could not login as admin.")
+ unwrap_ok!(device.authenticate_admin(ADMIN_PASSWORD))
}
-fn configure_hotp(admin: &ConfigureOtp, counter: u8) {
+fn configure_hotp(admin: &mut ConfigureOtp, counter: u8) {
let slot_data = OtpSlotData::new(1, "test-hotp", HOTP_SECRET, OtpMode::SixDigits);
assert_ok!((), admin.write_hotp_slot(slot_data, counter.into()));
}
-fn check_hotp_codes(device: &GenerateOtp, offset: u8) {
+fn check_hotp_codes(device: &mut GenerateOtp, offset: u8) {
HOTP_CODES.iter().enumerate().for_each(|(i, code)| {
if i >= offset as usize {
assert_ok!(code.to_string(), device.get_hotp_code(1));
@@ -63,6 +59,7 @@ fn check_hotp_codes(device: &GenerateOtp, offset: u8) {
#[test_device]
fn set_time(device: DeviceWrapper) {
+ let mut device = device;
assert_ok!((), device.set_time(1546385382, true));
assert_ok!((), device.set_time(1546385392, false));
assert_cmd_err!(CommandError::Timestamp, device.set_time(1546385292, false));
@@ -71,47 +68,50 @@ fn set_time(device: DeviceWrapper) {
#[test_device]
fn hotp_no_pin(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, false);
assert_ok!((), admin.write_config(config));
- configure_hotp(&admin, 0);
- check_hotp_codes(admin.deref(), 0);
+ configure_hotp(&mut admin, 0);
+ check_hotp_codes(admin.deref_mut(), 0);
- configure_hotp(&admin, 5);
- check_hotp_codes(admin.deref(), 5);
+ configure_hotp(&mut admin, 5);
+ check_hotp_codes(admin.deref_mut(), 5);
- configure_hotp(&admin, 0);
- check_hotp_codes(&admin.device(), 0);
+ configure_hotp(&mut admin, 0);
+ check_hotp_codes(&mut device, 0);
}
#[test_device]
fn hotp_pin(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, true);
assert_ok!((), admin.write_config(config));
- configure_hotp(&admin, 0);
- let user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD));
- check_hotp_codes(&user, 0);
+ configure_hotp(&mut admin, 0);
+ let mut user = unwrap_ok!(device.authenticate_user(USER_PASSWORD));
+ check_hotp_codes(&mut user, 0);
- assert_cmd_err!(CommandError::NotAuthorized, user.device().get_hotp_code(1));
+ assert_cmd_err!(CommandError::NotAuthorized, user.get_hotp_code(1));
}
#[test_device]
fn hotp_slot_name(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let slot_data = OtpSlotData::new(1, "test-hotp", HOTP_SECRET, OtpMode::SixDigits);
assert_ok!((), admin.write_hotp_slot(slot_data, 0));
- let device = admin.device();
assert_ok!("test-hotp".to_string(), device.get_hotp_slot_name(1));
assert_lib_err!(LibraryError::InvalidSlot, device.get_hotp_slot_name(4));
}
#[test_device]
fn hotp_error(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let slot_data = OtpSlotData::new(1, "", HOTP_SECRET, OtpMode::SixDigits);
assert_cmd_err!(CommandError::NoName, admin.write_hotp_slot(slot_data, 0));
let slot_data = OtpSlotData::new(4, "test", HOTP_SECRET, OtpMode::SixDigits);
@@ -130,7 +130,8 @@ fn hotp_error(device: DeviceWrapper) {
#[test_device]
fn hotp_erase(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, false);
assert_ok!((), admin.write_config(config));
let slot_data = OtpSlotData::new(1, "test1", HOTP_SECRET, OtpMode::SixDigits);
@@ -140,7 +141,6 @@ fn hotp_erase(device: DeviceWrapper) {
assert_ok!((), admin.erase_hotp_slot(1));
- let device = admin.device();
let result = device.get_hotp_slot_name(1);
assert_cmd_err!(CommandError::SlotNotProgrammed, result);
let result = device.get_hotp_code(1);
@@ -149,13 +149,13 @@ fn hotp_erase(device: DeviceWrapper) {
assert_ok!("test2".to_string(), device.get_hotp_slot_name(2));
}
-fn configure_totp(admin: &ConfigureOtp, factor: u64) {
+fn configure_totp(admin: &mut ConfigureOtp, factor: u64) {
let slot_data = OtpSlotData::new(1, "test-totp", TOTP_SECRET, OtpMode::EightDigits);
let time_window = 30u64.checked_mul(factor).unwrap();
assert_ok!((), admin.write_totp_slot(slot_data, time_window as u16));
}
-fn check_totp_codes(device: &GenerateOtp, factor: u64, timestamp_size: TotpTimestampSize) {
+fn check_totp_codes(device: &mut GenerateOtp, factor: u64, timestamp_size: TotpTimestampSize) {
for (base_time, codes) in TOTP_CODES {
let time = base_time.checked_mul(factor).unwrap();
let is_u64 = time > u32::max_value() as u64;
@@ -177,74 +177,76 @@ fn check_totp_codes(device: &GenerateOtp, factor: u64, timestamp_size: TotpTimes
#[test_device]
fn totp_no_pin(device: DeviceWrapper) {
- // TODO: this test may fail due to bad timing --> find solution
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, false);
assert_ok!((), admin.write_config(config));
- configure_totp(&admin, 1);
- check_totp_codes(admin.deref(), 1, TotpTimestampSize::U32);
+ configure_totp(&mut admin, 1);
+ check_totp_codes(admin.deref_mut(), 1, TotpTimestampSize::U32);
- configure_totp(&admin, 2);
- check_totp_codes(admin.deref(), 2, TotpTimestampSize::U32);
+ configure_totp(&mut admin, 2);
+ check_totp_codes(admin.deref_mut(), 2, TotpTimestampSize::U32);
- configure_totp(&admin, 1);
- check_totp_codes(&admin.device(), 1, TotpTimestampSize::U32);
+ configure_totp(&mut admin, 1);
+ check_totp_codes(&mut device, 1, TotpTimestampSize::U32);
}
#[test_device]
// Nitrokey Storage does only support timestamps that fit in a 32-bit
// unsigned integer, so don't test with it.
fn totp_no_pin_64(device: Pro) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, false);
assert_ok!((), admin.write_config(config));
- configure_totp(&admin, 1);
- check_totp_codes(admin.deref(), 1, TotpTimestampSize::U64);
+ configure_totp(&mut admin, 1);
+ check_totp_codes(admin.deref_mut(), 1, TotpTimestampSize::U64);
- configure_totp(&admin, 2);
- check_totp_codes(admin.deref(), 2, TotpTimestampSize::U64);
+ configure_totp(&mut admin, 2);
+ check_totp_codes(admin.deref_mut(), 2, TotpTimestampSize::U64);
- configure_totp(&admin, 1);
- check_totp_codes(&admin.device(), 1, TotpTimestampSize::U64);
+ configure_totp(&mut admin, 1);
+ check_totp_codes(&mut device, 1, TotpTimestampSize::U64);
}
#[test_device]
fn totp_pin(device: DeviceWrapper) {
- // TODO: this test may fail due to bad timing --> find solution
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, true);
assert_ok!((), admin.write_config(config));
- configure_totp(&admin, 1);
- let user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD));
- check_totp_codes(&user, 1, TotpTimestampSize::U32);
+ configure_totp(&mut admin, 1);
+ let mut user = unwrap_ok!(device.authenticate_user(USER_PASSWORD));
+ check_totp_codes(&mut user, 1, TotpTimestampSize::U32);
- assert_cmd_err!(CommandError::NotAuthorized, user.device().get_totp_code(1));
+ assert_cmd_err!(CommandError::NotAuthorized, user.get_totp_code(1));
}
#[test_device]
// See comment for totp_no_pin_64.
fn totp_pin_64(device: Pro) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, true);
assert_ok!((), admin.write_config(config));
- configure_totp(&admin, 1);
- let user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD));
- check_totp_codes(&user, 1, TotpTimestampSize::U64);
+ configure_totp(&mut admin, 1);
+ let mut user = unwrap_ok!(admin.authenticate_user(USER_PASSWORD));
+ check_totp_codes(&mut user, 1, TotpTimestampSize::U64);
- assert_cmd_err!(CommandError::NotAuthorized, user.device().get_totp_code(1));
+ assert_cmd_err!(CommandError::NotAuthorized, device.get_totp_code(1));
}
#[test_device]
fn totp_slot_name(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let slot_data = OtpSlotData::new(1, "test-totp", TOTP_SECRET, OtpMode::EightDigits);
assert_ok!((), admin.write_totp_slot(slot_data, 0));
- let device = admin.device();
let result = device.get_totp_slot_name(1);
assert_ok!("test-totp", result);
let result = device.get_totp_slot_name(16);
@@ -253,7 +255,8 @@ fn totp_slot_name(device: DeviceWrapper) {
#[test_device]
fn totp_error(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let slot_data = OtpSlotData::new(1, "", TOTP_SECRET, OtpMode::SixDigits);
assert_cmd_err!(CommandError::NoName, admin.write_totp_slot(slot_data, 0));
let slot_data = OtpSlotData::new(20, "test", TOTP_SECRET, OtpMode::SixDigits);
@@ -272,7 +275,8 @@ fn totp_error(device: DeviceWrapper) {
#[test_device]
fn totp_erase(device: DeviceWrapper) {
- let admin = make_admin_test_device(device);
+ let mut device = device;
+ let mut admin = make_admin_test_device(&mut device);
let config = Config::new(None, None, None, false);
assert_ok!((), admin.write_config(config));
let slot_data = OtpSlotData::new(1, "test1", TOTP_SECRET, OtpMode::SixDigits);
@@ -282,7 +286,6 @@ fn totp_erase(device: DeviceWrapper) {
assert_ok!((), admin.erase_totp_slot(1));
- let device = admin.device();
let result = device.get_totp_slot_name(1);
assert_cmd_err!(CommandError::SlotNotProgrammed, result);
let result = device.get_totp_code(1);
generated by cgit v1.2.1 (git 2.18.0) at 2024-04-19 20:19:57 +0000