diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 65 |
1 files changed, 47 insertions, 18 deletions
@@ -1,38 +1,54 @@ <!--- Copyright (C) 2019 Robin Krahl <robin.krahl@ireas.org> -SPDX-License-Identifier: MIT +SPDX-License-Identifier: CC0-1.0 --> # nitrokey-rs A libnitrokey wrapper for Rust providing access to Nitrokey devices. -[Documentation][] +## Usage + +For usage information, have a look at the [API reference][API reference] and at +the [examples][] in the `examples` directory. You can also have a look at the +[`nitrocli`][] crate, a command-line interface for Nitrokey devices that uses +this crate. ## Compatibility -The required [`libnitrokey`][] version is built from source. The host system +This crate provides access to all features of the [`libnitrokey`][] C API for +both the Nitrokey Pro and the Nitrokey Storage: general configuration, one-time +password generation, the password safe and the secure storage on the Nitrokey +Storage. + +The required `libnitrokey` version is built from source. The host system must provide `libhidapi-libusb0` (Linux) or `libhidapi` (non-Linux) in the default library search path. Depending on your system, you might also have to install the [Nitrokey udev rules][]. -Currently, this crate provides access to the common features of the Nitrokey -Pro and the Nitrokey Storage: general configuration, OTP generation and the -password safe. Basic support for the secure storage on the Nitrokey Storage is -available but still under development. +If you want to use a precompiled version of `libnitrokey`, you can set the +`USE_SYSTEM_LIBNITROKEY` environment variable during build. In this case, +`libnitrokey` must be available in the library search path. ### Unsupported Functions The following functions provided by `libnitrokey` are deliberately not supported by `nitrokey-rs`: +- `NK_connect_with_ID`, `NK_list_devices_by_cpuID`. These functions can be + replaced by calls to `NK_connect_with_path` and `NK_list_devices`, which + also have a cleaner API. +- `NK_enable_firmware_update_pro`, `NK_change_firmware_password_pro`. These + functions execute commands that are not yet supported by the Nitrokey Pro + firmware. - `NK_get_device_model`. We know which model we connected to, so we can provide this information without calling `libnitrokey`. -- `NK_is_AES_supported`. This method is no longer needed for Nitrokey devices - with a recent firmware version. +- `NK_is_AES_supported`. This function is no longer needed for Nitrokey + devices with a recent firmware version. +- `NK_send_startup`. Currently, this function is redundant to `NK_get_time`. - `NK_set_unencrypted_volume_rorw_pin_type_user`, `NK_set_unencrypted_read_only`, `NK_set_unencrypted_read_write`. These - methods are only relevant for older firmware versions (pre-v0.51). As the + functions are only relevant for older firmware versions (pre-v0.51). As the Nitrokey Storage firmware can be updated easily, we do not support these outdated versions. - `NK_totp_get_time`, `NK_status`. These functions are deprecated. @@ -55,14 +71,22 @@ Note that the tests assume that the device’s passwords are the factory default (admin PIN `12345678`, user PIN `123456`, update password `12345678`) and that an AES key has been built. Some tests will overwrite the data stored on the Nitrokey device or perform a factory reset. Never execute the tests if you -unless yout want to destroy all data on all connected Nitrokey devices! +don’t want to destroy all data on any connected Nitrokey device! + +The test suite contains some test that take very long to execute, for example +filling the SD card of a Nitrokey Storage with random data. These tests are +ignored per default. Use `cargo test -- --ignored` to execute the tests. ## Acknowledgments -Thanks to Nitrokey UG for providing a Nitrokey Storage to support the +Thanks to Nitrokey UG for providing two Nitrokey devices to support the development of this crate. Thanks to Daniel Mueller for contributions to `nitrokey-rs` and for the `nitrokey-test` crate. +## Minimum Supported Rust Version + +This crate supports Rust 1.40.0 or later. + ## Contact For bug reports, patches, feature requests or other messages, please send a @@ -70,16 +94,21 @@ mail to [nitrokey-rs-dev@ireas.org][]. ## License -This project is licensed under the [MIT License][]. `libnitrokey` is licensed -under the [LGPL-3.0][]. +This project is licensed under the [MIT][] license. The documentation and +configuration files contained in this repository are licensed under the +[Creative Commons Zero][CC0] license. You can find a copy of the license texts +in the `LICENSES` directory. `libnitrokey` is licensed under the [LGPL-3.0][]. -`nitrokey-rs` complies with [version 2.0 of the REUSE practices][reuse]. +`nitrokey-rs` complies with [version 3.0 of the REUSE specification][reuse]. -[Documentation]: https://docs.rs/nitrokey +[API reference]: https://docs.rs/nitrokey +[examples]: https://git.ireas.org/nitrokey-rs/tree/examples +[`nitrocli`]: https://github.com/d-e-s-o/nitrocli [Nitrokey udev rules]: https://www.nitrokey.com/documentation/frequently-asked-questions-faq#openpgp-card-not-available [`libnitrokey`]: https://github.com/nitrokey/libnitrokey [`nitrokey-test`]: https://github.com/d-e-s-o/nitrokey-test [nitrokey-rs-dev@ireas.org]: mailto:nitrokey-rs-dev@ireas.org -[MIT license]: https://opensource.org/licenses/MIT +[MIT]: https://opensource.org/licenses/MIT +[CC0]: https://creativecommons.org/publicdomain/zero/1.0/ [LGPL-3.0]: https://opensource.org/licenses/lgpl-3.0.html -[reuse]: https://reuse.software/practices/2.0/ +[reuse]: https://reuse.software/practices/3.0/ |