aboutsummaryrefslogtreecommitdiff
path: root/st.c
Commit message (Collapse)AuthorAge
...
* Add DA and DECID sequencesRoberto E. Vargas Caballero2012-10-06
| | | | | | | These sequences are used by the host in order to can detect which kind of terminal is connected. St will answer like a vt102 terminal with this patch. --- st.c | 9 +++++++++ 1 file changed, 9 insertions(+)
* Fixing a typo.Christoph Lohmann2012-10-06
|
* Fixing a off-by-one error in the new border clearing code.Christoph Lohmann2012-10-06
|
* Print control codes only in graphic modeRoberto E. Vargas Caballero2012-10-06
| | | | | | | | Non handled codes must be ignored, except in graphic mode. Also STR sequences have higher priority than control codes, so they must be handled before of them. --- st.c | 160 ++++++++++++++++++++++++++++++++++++------------------------------ 1 file changed, 87 insertions(+), 73 deletions(-)
* Add SI and SO control codesRoberto E. Vargas Caballero2012-10-06
| | | | | | | | | SI and SO allows change the G0 and G1 selection. This implementation is not full vt100 compatible, but it is complatible with linux virtual terminal implementation. For full vt100 compatibility we need remake a lot of stuff relate to the different charmaps. --- st.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
* Add SUB and CAN control codesRoberto E. Vargas Caballero2012-10-06
| | | | | | These control codes reset any escape sequence already initialised. --- st.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
* Add documentation to control codesRoberto E. Vargas Caballero2012-10-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the documentation from the vt100 manual programmer: Control Octal Action Taken Character Code ------------------------------------------- NUL 000 Ignored on input (not stored in input buffer; see full duplex protocol). ENQ 005 Transmit answerback message. BEL 007 Sound bell tone from keyboard. BS 010 Move the cursor to the left one character position, unless it is at the left margin, in which case no action occurs. HT 011 Move the cursor to the next tab stop, or to the right margin if no further tab stops are present on the line. LF 012 This code causes a line feed or a new line operation. (See new line mode). VT 013 Interpreted as LF. FF 014 Interpreted as LF. CR 015 Move cursor to the left margin on the current line. SO 016 Invoke G1 character set, as designated by SCS control sequence. SI 017 Select G0 character set, as selected by ESC ( sequence. XON 021 Causes terminal to resume transmission. XOFF 023 Causes terminal to stop transmitted all codes except XOFF and XON. CAN 030 If sent during a control sequence, the sequence is immediately terminated and not executed. It also causes the error character to be displayed. SUB 032 Interpreted as CAN. ESC 033 Invokes a control sequence. DEL 177 Ignored on input (not stored in input buffer). -------------------------------------------- --- st.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-)
* Forgot to remove the xclearborders() definition from the last commit.Christoph Lohmann2012-10-06
|
* Removing the xclearborders() hack. St now cleans up the parts of the border,Christoph Lohmann2012-10-06
| | | if something needs to be drawn close to it.
* The style inquisition was here. Yes, making it a unified style. The lastChristoph Lohmann2012-10-06
| | | infidels will be squashed too!
* Adding the patch of David Dufberg Töttrup to implement WM_DELETE_WINDOW. ↵Christoph Lohmann2012-10-05
| | | | Thank you!
* Fixing the brightening on bold. For the 256 colors and greyscale I assumed aChristoph Lohmann2012-10-05
| | | reasonable solution.
* When the drawing behaviour was changed underline was not corrected.Christoph Lohmann2012-10-05
| | | Thanks to Peter A. Shevtsov!
* This adds the fontcache dependency to try something out. Additionally theChristoph Lohmann2012-10-04
| | | | invert mode now works as expected. In the config.def.h autohint is set to false, so the fonts are drawn correctly, without any overlapping.
* Thanks to c00kiemon5ter. Not changing bold to bright colors seems to be theChristoph Lohmann2012-10-02
| | | right choice.
* This changes -f to be the parameter for the font. Now -f is -o.Christoph Lohmann2012-09-30
| | | The parameters were reordered according to the alphabet too.
* Remove the cruft of the user to have to define the different font styles.Christoph Lohmann2012-09-30
|
* We need all the colors to be available, so die() on some not available.Christoph Lohmann2012-09-29
| | | | This is a new opportunity to see if X11 somewhen handled colors in a strange way.
* All xcolors are not Xft colors and the clearing of the borders has beenChristoph Lohmann2012-09-29
| | | optimized. There is a speedup when resizing windows.
* Vt escape sequences allow escape sequences in escape sequences and escapeChristoph Lohmann2012-09-27
| | | | | sequences, so we have to support escape sequences in escape sequences that escape sequences in escape sequences – setting a title won't notify you anymore.
* Allow control characters inside escape sequencesRoberto E. Vargas Caballero2012-09-26
| | | | | | | | | | | | Taken from vt100 manual programmer: Control characters (codes \0 to \37 inclusive) are specifically excluded from the control sequence syntax, but may be embedded within a control sequence. Embedded control characters are executed as soon as they are encountered by the VT100. The processing of the control sequence then continues with the next character received. --- st.c | 68 +++++++++++++++++++++++++++++++++--------------------------------- 1 file changed, 34 insertions(+), 34 deletions(-)
* Ignore all control characters not handledRoberto E. Vargas Caballero2012-09-26
| | | | | | | | | | | | | Taken from vt100 programmer manual: Control characters have values of \000 - \037, and \177. The control characters recognized by the VT100 are shown in Table 3-10. All other control codes cause no action to be taken. We have to take attention when we are using alternate charset, because in this cases they are not used as control characters. --- st.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
* Implementing line drawing right.Christoph Lohmann2012-09-26
|
* A reset should reset the line drawing too.Christoph Lohmann2012-09-25
|
* Enabling enacs and adding compatibility to xterm and urxvt for alternativeChristoph Lohmann2012-09-25
| | | charsets.
* Fix bug in tputc writing to io fileRoberto E. Vargas Caballero2012-09-25
| | | | | | | | | | If -f options is enabled then tputc() writes all the data to a file. Actual code assumes that all the strings in 'c' parameters have always 1 byte length, but this is not always true, because due to utf-8 encoding some characters can have a diferent length. So it is necessary pass string length to tputc in order it can call to write() correctly. --- st.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
* The xinit() call needs to be behind all the tty init, otherwise all theChristoph Lohmann2012-09-24
| | | | allocated structures are wrong. The xclear() is now done on purpose. Please keep X11 calls out of the way of pure tty-related calls.
* Add some documentetion to tsetmodeRoberto E. Vargas Caballero2012-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The names of the terminal modes supported by vt102 are (taken from the VT220 programmer reference manual): Table 4-7 ANSI-Standardized Modes Name Mnemonic Parameter (Ps) Error (ignored) - 0 (3/0) Keyboard action KAM 2 (3/2) Insert/replace IRM 4 (3/4) Send/receive SRM 12 (3/1 3/2) Line feed/new line LNM 20 (3/2 3/0) Table 4-8 ANSI-Compatible DEC Private Modes Name Mnemonic Parameter (Ps) Error (ignored) - 0 (3/0) Cursor key DECCKM 1 (3/1) ANSI/VT52 DECANM 2 (3/2) Column DECCOLM 3 (3/3) Scroll DECSCLM 4 (3/4) Screen DECSCNM 5 (3/5) Origin DECOM 6 (3/6) Auto wrap DECAWM 7 (3/7) Auto repeat DECARM 8 (3/8) Printer form feed DECPFF 18 (3/1 3/8) Printer extent DECPEX 19 (3/1 3/9) Text cursor enable DECTCEM 25 (3/2 3/5) National replacement character sets DECNRCM 42 (3/4 3/2) This patch adds a comment for each one of these sequences. --- st.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-)
* Fix LNM sequenceRoberto E. Vargas Caballero2012-09-24
| | | | | | LNM sequence is a standard ANSI mode, not a DEC private mode. --- st.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
* Add KAM sequenceRoberto E. Vargas Caballero2012-09-24
| | | | | | | This sequence lock/unlock the keyboard ignoring all the key pressing events from X server. --- st.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
* Remove unused parameters in ttyresizeRoberto E. Vargas Caballero2012-09-24
| | | | | --- st.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
* Clear X window in tsetreset()Roberto E. Vargas Caballero2012-09-24
| | | | | | | | | | | tsetreset() is called when it is necessary a full initialization of the terminal, so it also should clean the full X window and not only the terminal content. It is necessary change the order of the initialization in main(), and put xinit before of tnew(), because tnew() calls to tsetreset(), and this can cause a call to xreset() with incorrect values. --- st.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
* Merging xft and current st heads.Christoph Lohmann2012-09-24
|\
| * use typedef'd unsigned type and regular bool type.Aurélien Aptel2012-09-19
| |
* | Initial Xft support for st. More to follow.Christoph Lohmann2012-09-24
|/
* Fixing the redrawing patch of k0ga, so it's using xclear() in redraw() too.Christoph Lohmann2012-09-17
|
* Clean windows display after resizingRoberto E. Vargas Caballero2012-09-17
| | | | | | | | | Some times the size after a resizing is not an exact multiply of a number of characters, so redrawn the screen using the lines and columns of the neww size can cause that some old graphics keep in the screen. Solution is clean all the windows with the background color. --- st.c | 3 +++ 1 file changed, 3 insertions(+)
* Copy non set positions as spacesRoberto E. Vargas Caballero2012-09-17
| | | | | | | | | | | | | | | | | | st selection don't insert in the selection position whose value is not set. This is correct for the positions in the end of the line, but cause some problems in the beginning. For example echo -e 'a\tb' will print in the screen: a b but after selecting and copying in some place you get: ab because positions from 1 to 7 don't have any value. This patch deals all positions without value as blank (even at the end of the line). --- st.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
* Add newline in error messagesRoberto E. Vargas Caballero2012-09-17
| | | | | --- st.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
* Add xcalloc wrapperRoberto E. Vargas Caballero2012-09-17
| | | | | | | malloc and realloc are called through xmalloc and xrealloc, so calloc should be called through xcalloc. --- st.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
* Applying a shortening proposal for the run loop of k0ga.Christoph Lohmann2012-09-16
|
* Remove call to draw in resizeRoberto E. Vargas Caballero2012-09-16
| | | | | | | In previous commits draw was removed from all the X events, but I forgot do it in resize. --- st.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
* Preliminary solution to the stuttering problem.Christoph Lohmann2012-09-16
|
* Fix selection bugRoberto E. Vargas Caballero2012-09-16
| | | | | | | | | | After the commit named "Remove timeout in the main loop", selection is not working in the proper way. After selecting something, press mouse button in a line outside of selection causes an incorrect highlight. This patch fix the problem forcing a draw after the press event, but this is only a fast hack. Real solution means rewriting selection code. --- st.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
* Render only once in each main loop iterationRoberto E. Vargas Caballero2012-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | draw() runs over all lines of the screen and renders only the dirty lines, this avoids render lines which are not modified since last draw() call. In this moment the main loop is something like: - Wait something to read from file descriptors - Read from pseudo tty - Call draw() for rending - Read X events This cause the problem that all the X events that have to update the screen have to call draw() (because draw() is called before of X events handling), so you can have multiples renderings in only one iteration, that will waste a lot of resources. This patch change the main loop to: - Wait something to read from file descriptors - Read from pseudo tty - Read X events - Call draw() for rending So X events don't have to worry about rendering, because draw() is called after them. The only place where draw is called outside of the main loop is in redraw(), but it is necessary for getting a good tput flash. --- st.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-)
* Remove timeout in the main loopRoberto E. Vargas Caballero2012-09-16
| | | | | | | | | | The main loop waits until there is some data to read in file descriptors of the X server or the pseudo tty. But it uses a timeout in select(), which causes that st awake each 20 ms, even it doesn't have something to do. This patch removes this problem removing the timeout, which is not needed. --- TODO | 1 - st.c | 27 +++------------------------ 2 files changed, 3 insertions(+), 25 deletions(-)
* Call XSync in redrawRoberto E. Vargas Caballero2012-09-16
| | | | | | | It is necessary call to XSync if you want a good tput flash, because in other way you can not be sure that white screen will be shown. --- st.c | 1 + 1 file changed, 1 insertion(+)
* Call XdbeQueryExtension before of calling any Xdbe functionRoberto E. Vargas Caballero2012-09-16
| | | | | | | | | | | | | | XdbeQueryExtension() tells to the caller if the Xdbe extension is present in the X server, so it should be called for sanity. But like is said in XdbeQueryExtension(3): No other Xdbe functions may be called before this function. If a client violates this rule, the effects of all subsequent Xdbe calls that it makes are undefined. it is mandatory call this function. --- st.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
* Implementing italic-bold. This will require an increase of the avgWdth.Christoph Lohmann2012-09-14
|
* Ignore NUL character as a padding character. Telnet may use this. Patch ofChristoph Lohmann2012-09-13
| | | Roberto Vargas.
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-09 01:09:52 +0000