aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* Update kdch1 definition to three octal digits.Johannes Postma2015-03-07
| | | | | | | | | | ncurses wasn't able to detect the delete-character key as KEY_DC. This patch fixes that. kdch1 was defined as "\0177", but terminfo(5) states: ... characters may be given as three octal digits after a \. The delete-character key is correctly defined in config.def.h.
* Small improvements to the FAQRoberto E. Vargas Caballero2015-02-28
|
* document keys in man pageGreg Reagle2015-02-23
|
* Let curses do the dirty work for flashIvan Delalande2015-02-22
| | | | | | | | Use the terminfo delay syntax ($<x>) in our flash capability to avoid hardcoding a fixed delay in redraw() when called from tsetmode() with DECSCNM. We need to turn on the npc capability so that delays are made with xon/xoff instead of padding characters.
* Comment default CC assignmentRoberto E. Vargas Caballero2015-02-22
| | | | | | CC by default is cc, so the assignment was doing nothing, but it was using non standard syntax, so some system (NetBSD) fail to compile.
* Update dates in LICENSERoberto E. Vargas Caballero2015-02-22
|
* Update year in usage()Nils Reuße2015-02-15
|
* Fix crash on font resize resizeNils Reuße2015-02-15
| | | | | if you keep downsizing your fontsize until either xw.ch or xw.cw gets 0, st crashes, because there is an unchecked division in cresize.
* Correct shift amount on MODE_INSERT in tputc()Rian Hunter2015-02-05
| | | | | | | When MODE_INSERT is set we'd shift characters on the same line forward before inserting our character in tputc(). This did not account for wide characters where width != 1. This patch makes it so we shift the correct amount.
* Fix crash due to wide charactersRian Hunter2015-02-05
| | | | | | | | | In tputc(), when a character wasn't large enough to fit on the current line, we would call tnewline() to place it on the next line. Unfortunately, we weren't resetting our glyph pointer and this caused memory corruption when a wide character (width == 2) was being written. This patch resets our glyph pointer after calls to tnewline().
* Fix crash due to invalid timespec given to pselectIvan Delalande2014-12-23
| | | | | | | | | | If blinktimeout is set to a value greater than 1000, pselect will receive a timeout argument with tv_nsec greater than 1E9 (1 sec), and fail, making st crash. This patch just ensures that the timespec structure is correctly filled with a value properly decomposed between tv_sec and tv_nsec. Reported by JasonWoof on IRC. Thanks!
* Trim trailing whitespaces in every selection caseIvan Delalande2014-11-19
| | | | | | | | | Trailing whitespaces are trimmed when copying from normal selection and rectangular selection on lines that have their last character included or on the left of the selection. It leads to inconsistent behaviors when copying the exact same text from the left and right window in applications with vertical splits. This patch solves this issue by always trimming the selection.
* Call _exit() instead of exit() if exec*() failssin2014-11-19
| | | | | exit() will also unwind the atexit() functions. This is bad because if exec*() fails the process is in an inconsistent state.
* Check for presence of SHELL environment variableEric Pruitt2014-11-11
| | | | | | | | | - POSIX states the SHELL environment variable "... shall represent a pathname of the user's preferred command language interpreter." As such, st should check for its presence when deciding what shell to use; just as HOME can be defined to override one's passwd-defined home directory, a user should also be able to override their passwd-defined shell using the SHELL environment variable.
* Replace character with U+FFFD if wcwidth() is -1czarkoff@gmail.com2014-11-03
| | | | Helpful when new Unicode codepoints are not recognized by libc.
* Avoid failing when embedding with a Window id of 0Quentin Rameau2014-10-21
| | | | I'd like to let st run with its own window when trying to embed it to a window with id 0 instead of exiting with an error.
* Reverting smacs and rmacs to the xterm defaults.Christoph Lohmann2014-10-21
| | | | | | These are needed by ncurses to correctly handle the switch between line drawing. The changes to the alternative characterset code already fixed the urwid hack.
* Do not set SHELL to utmp everRoberto E. Vargas Caballero2014-10-15
| | | | | SHELL must be set to the SHELL of the user, but it was possible set it to utmp.
* patch for bell in stCustaiCo2014-10-13
| | | | | | | | | | | | | | | The XBell() call currently used when a bell is recieved sends a message to the X server, but if the X server doesn't know how to sound it, it just gets ignored and I have not been able to find anywhere in x.org's code a way to configure the action that the server does. However, if you use XkbBell() then you can have a process listening for the XkbBellNotifyEvent that is produced and either alert you visually or play an audio file or whatever you want as your notification. You have to include one more header file but the function seems to be compiled as part of Xlib, at least on my installation. CustaiCo
* Use G1 for alternate charsetRoberto E. Vargas Caballero2014-10-08
| | | | | | | | St has enacs, which must be printed if a program requires to use the alternate charset (graphic charset), that in st case was to select charset graphic for G1, but it was not useful at all because smacs and rmacs were always redefining the value of G0.
* Add LS2 and LS3Roberto E. Vargas Caballero2014-10-08
| | | | | These sequences are the equivalents of LS0 and LS1, but for G2 and G3.
* Fix SI and SORoberto E. Vargas Caballero2014-10-08
| | | | | | SI (0x0F or ^O) means Shift In, and it selects G1 charset definition, and SO (0x0E or ^N) means Shift Out, and it selects G0 charset definition, but st was doing just the inverse.
* Removing an extra space.Christoph Lohmann2014-09-29
|
* Minor style changes for the last patch.Christoph Lohmann2014-09-29
|
* Implementing xzoomreset.Christoph Lohmann2014-09-29
| | | | Thanks mvdan@mvdan.cc for proposing this.
* Add missed names of charset sequencesRoberto E. Vargas Caballero2014-09-23
|
* Add support for utmp in stRoberto E. Vargas Caballero2014-09-23
| | | | | | | | | | | | | | | St runs an interactive shell and not a login shell, and it means that profile is not loaded. The default terminal configuration in some system is not the correct for st, but since profile is not loaded there is no way of getting a script configures the correct values. St doesn't update the utmp files, this is the job of another suckless tool, utmp. Utmp also opens a login shell (it is the logical behaviour when you create a new user record) it is a good option execute utmp and then get a correct input in utmp, wtmp and lastlog file, and execute the content of the profile.
* Remove indentation level in xdrawcursorRoberto E. Vargas Caballero2014-09-09
|
* Removing wrapping newlines from selectionBen Hendrickson2014-08-23
| | | | | | | | | | | | | | | | When getting selected text, lines that were wrapped because of length ought not include the wrapping newline in the selection. This comes up, for example, when copying a bash command that is long enough to wrap from the console and pasting it back into the console. The extra newline breaks it. Similiarly, changes behavior when trimming whitespace from the end of a physical line to only do so if the line does not wrap. Otherwise we are trimming whitespace from the middle of a logical line, which may change its meaning. Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Change the behavior of word snapping on delimitersIvan Delalande2014-08-21
| | | | | | | | This makes any sequence of identical delimiters be considered a single word in word-snapping mode. This seems more coherent for this mode and is similar to what xterm does. Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Move calls to selsnap into selnormalizeIvan Delalande2014-08-21
| | | | | | | | This simplifies getbuttoninfo() and bpress(), and fixes a bug which made word snapping behave incorrectly when a delimiter was at the beginning or end of line. Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Improve readability of enum membersAlexander Huemer2014-08-20
| | | | | | | | The 'left shift from one' notation of power of two integers is more expressive than the result. Signed-off-by: Alexander Huemer <alexander.huemer@xx.vu> Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Add eschandle()Roberto E. Vargas Caballero2014-08-20
| | | | | | | We already have a csihandle() function, where is located code about CSI sequences, so it is logical do the same with ESC sequences. This change helps to simplify tcontrol(), which has a complex flow and should be rewritten.
* Improve execsh() and don't allow anonymous shellsRoberto E. Vargas Caballero2014-08-20
| | | | | This patch improves the shell selection on execsh and forbid shell with users don't registered in the passwd file.
* Fix definition of CONTROLC0Roberto E. Vargas Caballero2014-08-19
| | | | | | | DEL character is not thecnically talking a C0 control character, although it has some common properties with them, so it is useful for us consider it as C0. Before this patch DEL (\177), was not ignored as it ought to be.
* Make useful DEL in application modeRoberto E. Vargas Caballero2014-08-19
| | | | | | DEL key has to generate the sequence ^[P in application mode, because such sequence means delete current character. It implies that the character sent in keypad mode must be ^? (DEL character).
* reset the alt screen in tresetQuentin Carbonneaux2014-08-19
| | | | Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* simplify loop in tresizeQuentin Carbonneaux2014-08-19
| | | | Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Simplify READMEAlexander Huemer2014-08-18
| | | | | | | | The term 'virtual terminal emulator' was broken. There is nothing virtual about it, it's a terminal emulator. Signed-off-by: Alexander Huemer <alexander.huemer@xx.vu> Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Fix man page and usage()Roberto E. Vargas Caballero2014-08-17
| | | | | | Man page was repeating -f option, the second time instead of -i, and this option was lost in usage() message. This patch also indent the output of usage().
* Convert VT102ID to a config variableRoberto E. Vargas Caballero2014-08-15
| | | | | | VT102ID is the sequence that the terminal returns when it is inquired to identify itself. This value should be configurable in the same way that another st parameters.
* Fix portability problem in techo()Roberto E. Vargas Caballero2014-08-15
| | | | | | | | | | ISCONTROL chechks if a value is between 0 and 0x1f or between 0x80 and 0x9f. Char signess depends of architecture and compiler, so in some environment the second case is always false (and wrong), Techo() calls ISCONTROL with a char variable, whose type cannot be changed because tpuc() expects a pointer to char, so the solution is to insert a cast in the call to ISCONTROL.
* Don't set dirty all lines because tswapcreen do itnoname2014-08-10
| | | | Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* tresize return value is not usednoname2014-08-10
| | | | Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Remove ul capabilityRoberto E. Vargas Caballero2014-08-07
| | | | | | | | This capability indicates that underscore '_' overstrike current letter under the cursor. It means that you can generate a underline 'b' using 'b^H_', because it writes a 'b' then backward one characther and then overstrike '_'. St has not such behaviour, so it is an error to have this capability.
* Unset mode when clearing regionsRoberto E. Vargas Caballero2014-08-07
| | | | | | | | | | | | | | tclearregion() was clearing regions using spaces and the current attributes of the terminal. It was correct with all the modes excepct underline, because they didn't affect the space character, but in the case of underline it was a problem. A easy way of seeing this problem is writing this in the last line of the terminal: tput smul ; echo first; tput rmul; echo second; echo third Fist was underlined, and second and third were not underlined, but the spaces at the right of second was underlined becuause in the previous scrool underline mode was set.
* Add error message when child exits whit errorRoberto E. Vargas Caballero2014-08-04
| | | | | | Master proccess was not showing any error message when the child died with an error, and it was very confusing for the user (for example with incorrect -e command).
* Remove difference between fast and slow blinkingRoberto E. Vargas Caballero2014-07-31
| | | | | | | | | | One blinking mode is good enough, and two is too much. The best aproach is emulate the fast blinking with the slow blinking, that it is more used. It is removed the flag ATTR_FASTBLINK because it has not a different meaning of ATTR_BLINK, so it is not needed. Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Fix disabling of bold and fastblinkMichael Forney2014-07-26
| | | | | | | | | | | | | According to ECMA-48¹ 8.3.117, an attribute value of 21 is "doubly underlined", while 22 is "normal colour or normal intensity (neither bold nor faint)". Additionally, 25 is "steady (not blinking)", which likely means neither slow blink nor fast blink. ¹: http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
* Add info about Backspace and Delete to the FAQWolfgang Corcoran-Mathe2014-07-26
| | | | | | | | | | Here is a modest attempt at cleaning it up a little bit. I changed a few phrases that seemed awkward, but I think the content is the same. -- Wolfgang Corcoran-Mathe Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-18 12:00:27 +0000