| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
This change updates the nitrokey crate to version 0.3.3. Along with that
change we update rand to 0.6.4 because rand 0.6.1 does not yet contain a
publicly accessible rand_os. Note that we no longer require all
crates in rand's workspace, but only rand_os and rand_core, which is a
significant reduction in the number of lines of code compiled.
Import subrepo nitrokey/:nitrokey at 7cf747d56ddc0b7eeedc3caf36dcc909907a171c
Import subrepo rand/:rand at 4336232dda03323634b10ec72ddf27914aebc3a2
|
| |
|
|
|
|
| |
This change adds a set of tests for the config get and set commands. We
cover chosen valid parameter combinations and verify that they work as
expected as well as an invalid one.
|
| |
|
|
|
|
|
| |
This change adds a set of tests for the otp command. We cover some
variants of the status, set, get, and clear. Testing all the possible
combinations is out of scope and so only a more or less arbitrary subset
of arguments was chosen.
|
| |
|
|
|
|
| |
This change updates the libc crate to version 0.2.46.
Import subrepo libc/:libc at a9e3cc6c1b529eaffef5b82934d0c47203edebe5
|
| |
|
|
|
|
|
|
|
| |
Cargo uses SPDX 2.1 license identifiers. The identifier GPL-3.0+ is
deprecated as of version 2.0rc2 [0]. The current license identifier for GNU
General Public License v3.0 or later is GPL-3.0-or-later [1].
[0] https://spdx.org/licenses/GPL-3.0+.html
[1] https://spdx.org/licenses/GPL-3.0-or-later.html
|
| |
|
|
|
| |
This change adds a new section briefly elaborating on the problem of
using the program on macOS and details a possible solution.
|
| |
|
|
|
|
| |
This change updates the nitrokey crate to version 0.3.2.
Import subrepo nitrokey/:nitrokey at 6ea73f29daa5db0215663a0a38334b764863671d
|
| |
|
|
|
|
| |
This change updates the nitrokey-sys crate to version 3.4.3.
Import subrepo nitrokey-sys/:nitrokey-sys at fe86df47853718983e1f45d6a4289a1d93ace45c
|
| |
|
|
|
|
|
|
|
|
|
| |
The nitrokey-sys crate poses a challenge in that upgrading it causes
build errors caused by linking against the system's nitrokey library
from multiple crates, which is not allowed. The exact cause of the
problem is unclear but the suspicion is that a bug in Cargo's replacing
logic is the cause of the issue.
To work around this problem, this change switches to using the [patch]
section for replacing crates with local copies instead of the [replace]
one.
|
| |
|
|
|
|
|
|
|
|
| |
With the first usage of the nitrokey crate we have used the dependency's
path attribute to perform the replacement with a local version of the
source code, while most other dependencies are replaced using the
[replace] section.
Because the [replace] section is more flexible (it allows for
replacement of transitive dependencies), this change unifies all
dependencies to use it.
|
| |
|
|
|
|
|
|
|
|
|
| |
We exit the program using the process::exit function. This function just
exits the program directly, without any cleanup. That can be a problem
because IO buffers may not be flushed either. For a (typically) line
buffered entity like stdout that may result in data not terminated by a
newline symbol being not displayed properly.
This change explicitly flushes stdout before exiting the process to
alleviate this problem. Note that stderr output is unaffected, because
stderr is not buffered by design.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The application supports multiple devices both plugged in at the same
time as well as when used after the other. However, the GPG cache ID we
use for storing and retrieving the respective PIN is effectively a
constant. This constraint can cause problems when devices have different
PINs, as the PIN of a previously plugged in device may be reused for an
operation on a different one.
To resolve this problem this change adds the respective device's model
and serial number to the cache ID. As each serial number is supposed to
be different, this will ensure that the correct PIN is used for each
device. With this change we also show the model and serial number of the
currently used device in the pinentry dialog.
Note that because we do not store the serial numbers of all previously
plugged in devices, the pin clear command will only clear the PIN for
the currently plugged in device. If a user wants to make sure that a
cached PIN is cleared, the pin clear command should be invoked before
unplugging the device.
|
| |
|
|
|
| |
The implementation of the fmt::Display trait for the PinType is
seemingly unused. Remove it.
|
| |
|
|
|
|
| |
This patch implements From<&str> for Error so that we can use
Error::from(s) as a shorthand for Error::Error(s.to_string()). It also
replaces Error::Error with Error::from where possible.
|
| |
|
|
|
|
|
|
|
| |
nitrokey 0.3.1 introduced the connect_model function that connects to a
specific model given by an enum variant and returns a DeviceWrapper.
This new function allows us to remove the manual selection of a
connection method from the get_device function. We only have to
implement From<DeviceModel> for nitrokey::Model to be able to convert
our model enum to nitrokey's model enum.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the past we have already taken a couple of steps to reduce the size
of the final binary, arguing that binary size is the metric of most
relevance for the program at hand:
- the memory footprint is close to irrelevant because the program does
not stay resident in memory for long
- execution speed is likely dominated by communication with the Nitrokey
itself, which is a slow I/O device
With that in mind, this change decreases the binary size further by
swapping the default allocator we use (typically jemalloc) with the
system allocator (which is malloc based on Unix systems). Given that we
are by no means allocation sensitive, there is no point in wasting
binary size on something that adds no value.
This change decreases the binary size by another 324 KiB (for an already
stripped release mode binary).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change bumps the version of the crate to 0.2.2. The following
notable changes have been made since 0.2.1:
- Added the -v/--verbose option to control libnitrokey log level
- Added the -m/--model option to restrict connections to a device
model
- Added the -f/--format option for the otp set subcommand to
choose the secret format
- Deprecated the --ascii option
- Honor NITROCLI_ADMIN_PIN and NITROCLI_USER_PIN as well as
NITROCLI_NEW_ADMIN_PIN and NITROCLI_NEW_USER_PIN environment
variables for non-interactive PIN supply
- Format nitrokey reported errors in more user-friendly format
- Bumped nitrokey dependency to 0.3.1
|
| |
|
|
|
|
|
|
|
| |
The command detailed in the PIN section in the man page exhibit a larger
line spacing than all the other commands documented. The reason is that
we have an addition newline between each of the individual subcommands
in this section.
This patch removes this additional newline to achieve a more consistent
appearance.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
So far we have taken all nitrokey::CommandError objects and put them in
formatted form into the Error::Error variant. What we really should do,
though, is to preserve the original error, with the additional context
provided by the caller, and report that up the stack directly. Doing so
has at least the benefit that we are able to check for expected errors
without hard coding the textual representation as maintained by the
nitrokey create.
This change refactors the code accordingly and adds two tests for such
expected error codes.
|
| |
|
|
|
|
|
| |
Now that we have the infrastructure for non-interactive PIN supply in
place, we can add tests for commands that require the entry of a PIN.
To that end, this change adds tests for the pin set as well as pin
unblock commands.
|
| |
|
|
|
|
|
|
|
|
|
| |
The second source of interactivity comes from the pin set and pin
unblock commands, which also inquire with the pinentry module to ask the
user for a PIN.
This change adjusts the two commands to honor the PINs as available in
the command execution context. It also updates the documentation
to reflect the availability of the newly introduced and honored
environment variables NITROCLI_ADMIN_PIN & NITROCLI_USER_PIN as well as
NITROCLI_NEW_ADMIN_PIN & NITROCLI_NEW_USER_PIN.
|
| |
|
|
|
|
|
|
|
|
| |
The try_with_pin_and_data function is used by many commands to ask the
user for a PIN in an interactive manner. Because we do not want to have
any interactivity in our tests, we should honor the command execution's
admin & user PIN fields from this function, if set.
This change adjusts the function to honor the command execution
context's admin & user PIN, if set. In order to do so it also adjusts
the callers to hand through the context to begin with.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to run tests fully non-interactively we need to avoid the need
for using the GPG agent's PIN entry and caching mechanism. To accomplish
that, we first need an alternate way to supply the PINs to use to the
program.
This change offers such a way by extending the execution context with
two fields representing the PINs that are populated by corresponding
environment variables, NITROCLI_ADMIN_PIN & NITROCLI_USER_PIN, if set.
While only two PINs are required right now, because the program allows
for the changing of each of the PINs, we also add two fields
representing new PINs. These latter two fields are populated by the
NITROCLI_NEW_ADMIN_PIN and NITROCLI_NEW_USER_PIN environment variables.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In the future we will need to perform a sequence of invocations of the
program for testing purposes, with each having a slightly different
execution context. Such a scheme does not map very well to the existing
design where we essentially just have a function invocation to run the
program. We would either have functions that produce a different
execution context or pass in the data to modify.
Neither of these approaches is appealing and so this change reworks the
code slightly. With it, we now can create a Nitrocli object, which
contains the data that diverges from the default execution context. This
data will eventually be modifiable by callers.
|
| |
|
|
|
|
|
|
|
|
| |
The try_with_pin_and_data function is a fairly complex beast. Part of
that complexity stems from the returned Result value, whose error part
not only contains the error but also the previously passed in data. As
it turns out, though, this data as returned is never actually consumed
by any client.
Hence, this change simplifies the logic slightly by removing all the
additional complexity that this tuple return entailed.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The inquire_pin function of the pinentry module used to return a vector
of bytes, as that is what is ultimately read from the gpg-agent process.
All clients of this function, however, work with a string and, hence,
convert this vector into a string.
As it turns out, for better or worse, the pinentry::parse_pinentry_pin
function (which produces the result of inquire_pin) internally already
works with a string but then converts it back. That is both not useful
and a waste of resources.
This change adjusts both functions of interest to simply return a String
object instead, removing the need for conversions at the clients. While
at it, the patch also removes the need for a bunch of unnecessary
allocations caused by sub-par parameter type choice.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In the past we have used the term 'passphrase' to refer to the data
retrieved through the pinentry module and that terminology has permeated
the commands module as well.
However, on the Nitrokey side we talk about PINs most of the time
(despite a lack of an requirement for being actual numbers). In an
attempt to unify terminology a bit more, this change renames all
occurrences of the term 'passphrase' with PIN. This renaming has the
nice side effect of making the code more concise because the latter is
much shorter than the former.
|
| |
|
|
|
|
|
|
| |
For testing purposes it is beneficial to be able to check for expected
errors with the least amount of boiler plate code possible. This change
attempts to be a first step into this direction. It introduces a
test-only trait that can be used to directly unwrap a specific error
from a Result<T, crate::error::Error>.
|
| |
|
|
|
|
|
|
|
| |
At some point in the past nitrokey::CommandError was lacking an
implementation of the fmt::Display trait. Hence, we fell back to
printing these errors in debug format.
Since version 0.2.0 of the crate fmt::Display is implemented for these
errors. With this change we use it to report more user-friendly error
messages.
|
| |
|
|
|
|
| |
This change updates the nitrokey crate to version 0.3.1.
Import subrepo nitrokey/:nitrokey at bad12ad3c57c67d42243338af7d65c3591fed327
|
| |
|
|
|
| |
The help text for the otp set -a/--algorithm option is lacking the
closing parenthesis in the help text. This change adds it.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The argparse module we use for parsing events expects an enum in order
to convey what subcommand has been supplied as an argument. Such an enum
also needs to implement str::FromStr and, preferably, fmt::Display.
Manually writing down those definitions is error-prone, tedious, and
adds no value -- only lines of code.
As it turns out the proper definitions can be generated with relative
easy with a declarative macro, making the code much more concise. Hence,
with this change we use a newly introduced macro for generating those
enums.
|
| |
|
|
|
|
|
|
|
| |
Upon creation of a release on Github, the platform publishes the source
code. It is good practice to sign this source code, but it obviously
should be verified first. The procedure is not quite as trivial as it
should be and tedious to do manually.
To aid the process, this change adds a Makefile recipe that contains the
core logic and guides the user through the steps that are necessary.
|
| |
|
|
|
|
|
|
|
| |
This change introduces the first set of integration-style test for the
application. Those tests may or may not connect to an actual Nitrokey
device (depending on what they test). We use the nitrokey-test crate's
test attribute macro to automatically dispatch tests to connected
devices or skip them if a required device is not present. It also
provides the means for automatically serializing tests.
|
| |
|
|
|
|
|
|
|
|
|
| |
This change continues and concludes the effort of using customizable
stdio channels for output of data from the program. It does so by
replacing the standard println macro with a custom one that outputs the
data to the supplied context's stdout object.
Because this object is injected from the main function, it will be
possible for tests invoking this function to supply custom Write objects
that can buffer this data and make it available for verification
purposes.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to properly test the program we need to have a way to
intercept data printed to the stdio channels. There are different ways
to accomplish that task. While it is reasonably easy to just start the
program as a dedicated process doing so properly may be problematic from
inside a test because either the path to the binary has to be retrieved
or cargo -- the entity which knows the path -- be invoked. None of these
approaches is very appealing from a testing and code complexity point of
view: an additional fork means additional sources of errors and
flakiness, executing cargo has the potential to even cause rebuilds of
parts of the program, and while we are already testing against a slow I/O
device this additional code running is unlikely to go unnoticed in the
long-term.
Lastly, doing so also means that we leave Rust's type safety behind when
dealing with errors that could be nicely match'ed on when the test
invocation is just a function call.
To avoid all this complexity we instead strive for basically just
running the main function.
This patch marks a first step towards achieving this goal. It introduces
the infrastructure to supply custom Write objects to the argument
parsing functionality. Once more we piggy-back on the command execution
context and add objects representing stdout and stderr to it. We further
ensure that this context is passed to the argument parser invocations.
|
| |
|
|
|
|
|
|
|
|
| |
So far we have used a read-only reference to a command execution
context and passed that through to all consumers. However, with upcoming
changes we would will need to provide data that can be modified. This
change adjusts all function signatures accordingly. Also, because the
ExecCtx will contain references itself in the future, this change
already introduces a lifetime for the struct, as that also requires
signature adjustments.
|
| |
|
|
|
|
|
| |
Many applications display OTP secrets in the base32 format (according to
RFC 4648).
This patch adds base32 as a possible value for the --format option to
the otp set subcommand.
|
| |
|
|
|
|
|
| |
To parse OTP secrets in base32 representation, we need a new dependency:
the base32 crate.
Import subrepo base32/:base32 at a74cd9246fc0e08d6f5cfcb644bfdf76dd438613
|
| |
|
|
|
|
|
| |
This patch refactors the prepare_secret function by renaming it to
prepare_ascii_secret and by moving the formatting of a bytes slice as a
hex string into the format_bytes function. This prepares for adding a
the base32 format in a future patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch introduces the -f/--format options for the otp set
subcommand to specify the format of the OTP secret. Previously, the
default format was hexadecimal and ASCII format could be selected using
the --ascii option. The new --format option takes the argument hex or
ascii, defaulting to hex, and replaces the --ascii option.
This patch does not remove the --ascii option but marks it as
deprecated. It may not be set together with --format, and a warning is
printed if it is set. It should be deleted with the next minor release.
This patch prepares the addition of a new format, base32.
|
| |
|
|
|
|
|
|
|
|
| |
For a while now the unit tests no longer require a Nitrokey device to be
present in order to run. Right now that is because we lack device
specific tests, but even in the future we will take measures to not fail
when a device is not present (by default).
Hence, there is no reason not to run the unit tests as part of the
continuous integration pipeline. To that end, this change adds them to
said pipeline.
|
| |
|
|
|
|
| |
This change updates the nitrokey crate to version 0.3.0.
Import subrepo nitrokey/:nitrokey at 3593df8844b80741e2d33c8e5af80e65760dc058
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the -m/--model option that can be used to restrict the
device model to connect to. Per default, nitrocli connects to any
available Nitrokey device. If this new option is set, it will instead
only connect to devices of the given Nitrokey model.
We introduce a new struct DeviceModel instead of using
nitrokey::DeviceModel to make sure that the command-line options are
parsed properly. On the long term, we should add a connect_model
function to the nitrokey crate to make the connection code easier.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change introduces a new option, -v/--verbose, that can be used to
increase the log level of libnitrokey. The option can be supplied
multiple times, with each occurrence increasing the verbosity of the
logging.
On the implementation side, the option is set as part of connecting the
device (piggy-backing on the previously introduced command execution
context), although it describes global state that strictly speaking could
be set anywhere. It is bad enough that libnitrokey just prints log
messages to stderr (and does not accept a file handle) and that it does
not track the log level on a per-device basis, but we don't want setting
of global state from arbitrary locations inside the program. Instead,
let's do that along with what pretty much is the first call into
libnitrokey anyway: the connection to the device.
|
| |
|
|
|
|
|
|
|
| |
In the future we will need the ability to pass additional state that is
deduced from arguments or elsewhere into the commands module. To enable
such scenarios, this change introduces the concept of a command
execution context. Such a context can store more or less arbitrary data,
and the args module will take care of passing it through to the
individual commands.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This change bumps the version of the crate to 0.2.1. The following
notable changes have been made since 0.2.0:
- Added the pws command for accessing the password safe
- Added the lock command for locking the Nitrokey device
- Adjust release build compile options to optimize binary for size
- Bumped nitrokey dependency to 0.2.3
- Bumped rand dependency to 0.6.1
- Added rustc_version version 0.2.3, semver version 0.9.0, and
semver-parser version 0.7.0 as indirect dependencies
- Bumped cc dependency to 1.0.28
|
| |
|
|
|
|
|
|
|
|
| |
We have a Result::unwrap in the error path of handling io::Error
objects. I have actually seen that fail, masking the original error. We
should not unwrap there and in fact we don't have to, as io::Error
implements fmt::Display just fine.
This may have changed in the past, as the construct we had is much more
convoluted than necessary and would only have been written if a direct
formatting was not possible.
|
| |
|
|
|
|
|
|
| |
By now the nitrocli ebuild has been upstreamed for recent releases and
is available in the official Gentoo Portage tree.
This change updates the references to the Gentoo ebuild in the README
from the custom Github mirror to the official Gentoo Portage tree to
move users towards using the official ebuild.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In order to flush file system level buffers to disk we use the sync
function. The way we made this function known to the crate was by
explicitly declaring it as extern "C" and linking against libc. However,
given that we already (indirectly) depend on libc through the nitrokey
crate (and that is unlikely to change) we may as well make libc a direct
dependency and invoke the function through the crate.
Given that the libc crate is available for a variety of platforms, it
seems likely that its approach to interfacing with the system libc
library is more portable than our hand rolled version.
|
