diff options
Diffstat (limited to 'src/args.rs')
| -rw-r--r-- | src/args.rs | 209 |
1 files changed, 40 insertions, 169 deletions
diff --git a/src/args.rs b/src/args.rs index 305e433..e742f7c 100644 --- a/src/args.rs +++ b/src/args.rs @@ -111,16 +111,16 @@ impl From<DeviceModel> for nitrokey::Model { /// A top-level command for nitrocli. #[allow(unused_doc_comments)] Command! {Command, [ - Config(ConfigArgs) => config, - Encrypted(EncryptedArgs) => encrypted, - Hidden(HiddenArgs) => hidden, - Lock(LockArgs) => lock, - Otp(OtpArgs) => otp, - Pin(PinArgs) => pin, - Pws(PwsArgs) => pws, - Reset(ResetArgs) => reset, - Status(StatusArgs) => status, - Unencrypted(UnencryptedArgs) => unencrypted, + Config(ConfigArgs) => |ctx, args: ConfigArgs| args.subcmd.execute(ctx), + Encrypted(EncryptedArgs) => |ctx, args: EncryptedArgs| args.subcmd.execute(ctx), + Hidden(HiddenArgs) => |ctx, args: HiddenArgs| args.subcmd.execute(ctx), + Lock(LockArgs) => |ctx, _| commands::lock(ctx), + Otp(OtpArgs) => |ctx, args: OtpArgs| args.subcmd.execute(ctx), + Pin(PinArgs) => |ctx, args: PinArgs| args.subcmd.execute(ctx), + Pws(PwsArgs) => |ctx, args: PwsArgs| args.subcmd.execute(ctx), + Reset(ResetArgs) => |ctx, _| commands::reset(ctx), + Status(StatusArgs) => |ctx, _| commands::status(ctx), + Unencrypted(UnencryptedArgs) => |ctx, args: UnencryptedArgs| args.subcmd.execute(ctx), ]} /// Reads or writes the device configuration @@ -374,7 +374,7 @@ pub struct UnencryptedSetArgs { } Command! {ConfigCommand, [ - Get(ConfigGetArgs) => config_get, + Get(ConfigGetArgs) => |ctx, _| commands::config_get(ctx), Set(ConfigSetArgs) => config_set, ]} @@ -414,10 +414,14 @@ impl<T> ConfigOption<T> { } Command! {OtpCommand, [ - Clear(OtpClearArgs) => otp_clear, - Get(OtpGetArgs) => otp_get, + Clear(OtpClearArgs) => |ctx, args: OtpClearArgs| { + commands::otp_clear(ctx, args.slot, args.algorithm) + }, + Get(OtpGetArgs) => |ctx, args: OtpGetArgs| { + commands::otp_get(ctx, args.slot, args.algorithm, args.time) + }, Set(OtpSetArgs) => otp_set, - Status(OtpStatusArgs) => otp_status, + Status(OtpStatusArgs) => |ctx, args: OtpStatusArgs| commands::otp_status(ctx, args.all), ]} Enum! {OtpAlgorithm, [ @@ -446,30 +450,26 @@ Enum! {OtpSecretFormat, [ ]} Command! {PinCommand, [ - Clear(PinClearArgs) => pin_clear, - Set(PinSetArgs) => pin_set, - Unblock(PinUnblockArgs) => pin_unblock, + Clear(PinClearArgs) => |ctx, _| commands::pin_clear(ctx), + Set(PinSetArgs) => |ctx, args: PinSetArgs| commands::pin_set(ctx, args.pintype), + Unblock(PinUnblockArgs) => |ctx, _| commands::pin_unblock(ctx), ]} Command! {PwsCommand, [ - Clear(PwsClearArgs) => pws_clear, - Get(PwsGetArgs) => pws_get, - Set(PwsSetArgs) => pws_set, - Status(PwsStatusArgs) => pws_status, + Clear(PwsClearArgs) => |ctx, args: PwsClearArgs| commands::pws_clear(ctx, args.slot), + Get(PwsGetArgs) => |ctx, args: PwsGetArgs| { + commands::pws_get(ctx, args.slot, args.name, args.login, args.password, args.quiet) + }, + Set(PwsSetArgs) => |ctx, args: PwsSetArgs| { + commands::pws_set(ctx, args.slot, &args.name, &args.login, &args.password) + }, + Status(PwsStatusArgs) => |ctx, args: PwsStatusArgs| commands::pws_status(ctx, args.all), ]} -/// Inquire the status of the Nitrokey. -fn status(ctx: &mut ExecCtx<'_>, _args: StatusArgs) -> Result<()> { - commands::status(ctx) -} - -/// Perform a factory reset. -fn reset(ctx: &mut ExecCtx<'_>, _args: ResetArgs) -> Result<()> { - commands::reset(ctx) -} - Command! {UnencryptedCommand, [ - Set(UnencryptedSetArgs) => unencrypted_set, + Set(UnencryptedSetArgs) => |ctx, args: UnencryptedSetArgs| { + commands::unencrypted_set(ctx, args.mode) + }, ]} Enum! {UnencryptedVolumeMode, [ @@ -477,70 +477,19 @@ Enum! {UnencryptedVolumeMode, [ ReadOnly => "read-only", ]} -/// Execute an unencrypted subcommand. -fn unencrypted(ctx: &mut ExecCtx<'_>, args: UnencryptedArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -/// Change the configuration of the unencrypted volume. -fn unencrypted_set(ctx: &mut ExecCtx<'_>, args: UnencryptedSetArgs) -> Result<()> { - commands::unencrypted_set(ctx, args.mode) -} - Command! {EncryptedCommand, [ - Close(EncryptedCloseArgs) => encrypted_close, - Open(EncryptedOpenArgs) => encrypted_open, + Close(EncryptedCloseArgs) => |ctx, _| commands::encrypted_close(ctx), + Open(EncryptedOpenArgs) => |ctx, _| commands::encrypted_open(ctx), ]} -/// Execute an encrypted subcommand. -fn encrypted(ctx: &mut ExecCtx<'_>, args: EncryptedArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -/// Open the encrypted volume on the Nitrokey. -fn encrypted_open(ctx: &mut ExecCtx<'_>, _args: EncryptedOpenArgs) -> Result<()> { - commands::encrypted_open(ctx) -} - -/// Close the previously opened encrypted volume. -fn encrypted_close(ctx: &mut ExecCtx<'_>, _args: EncryptedCloseArgs) -> Result<()> { - commands::encrypted_close(ctx) -} - Command! {HiddenCommand, [ - Close(HiddenCloseArgs) => hidden_close, - Create(HiddenCreateArgs) => hidden_create, - Open(HiddenOpenArgs) => hidden_open, + Close(HiddenCloseArgs) => |ctx, _| commands::hidden_close(ctx), + Create(HiddenCreateArgs) => |ctx, args: HiddenCreateArgs| { + commands::hidden_create(ctx, args.slot, args.start, args.end) + }, + Open(HiddenOpenArgs) => |ctx, _| commands::hidden_open(ctx), ]} -/// Execute a hidden subcommand. -fn hidden(ctx: &mut ExecCtx<'_>, args: HiddenArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -fn hidden_create(ctx: &mut ExecCtx<'_>, args: HiddenCreateArgs) -> Result<()> { - commands::hidden_create(ctx, args.slot, args.start, args.end) -} - -fn hidden_open(ctx: &mut ExecCtx<'_>, _args: HiddenOpenArgs) -> Result<()> { - commands::hidden_open(ctx) -} - -fn hidden_close(ctx: &mut ExecCtx<'_>, _args: HiddenCloseArgs) -> Result<()> { - commands::hidden_close(ctx) -} - -/// Execute a config subcommand. -fn config(ctx: &mut ExecCtx<'_>, args: ConfigArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -/// Read the Nitrokey configuration. -fn config_get(ctx: &mut ExecCtx<'_>, _args: ConfigGetArgs) -> Result<()> { - commands::config_get(ctx) -} - -/// Write the Nitrokey configuration. fn config_set(ctx: &mut ExecCtx<'_>, args: ConfigSetArgs) -> Result<()> { let numlock = ConfigOption::try_from(args.no_numlock, args.numlock, "numlock")?; let capslock = ConfigOption::try_from(args.no_capslock, args.capslock, "capslock")?; @@ -555,23 +504,7 @@ fn config_set(ctx: &mut ExecCtx<'_>, args: ConfigSetArgs) -> Result<()> { commands::config_set(ctx, numlock, capslock, scrollock, otp_pin) } -/// Lock the Nitrokey. -fn lock(ctx: &mut ExecCtx<'_>, _args: LockArgs) -> Result<()> { - commands::lock(ctx) -} - -/// Execute an OTP subcommand. -fn otp(ctx: &mut ExecCtx<'_>, args: OtpArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -/// Generate a one-time password on the Nitrokey device. -fn otp_get(ctx: &mut ExecCtx<'_>, args: OtpGetArgs) -> Result<()> { - commands::otp_get(ctx, args.slot, args.algorithm, args.time) -} - -/// Configure a one-time password slot on the Nitrokey device. -pub fn otp_set(ctx: &mut ExecCtx<'_>, args: OtpSetArgs) -> Result<()> { +fn otp_set(ctx: &mut ExecCtx<'_>, args: OtpSetArgs) -> Result<()> { let data = nitrokey::OtpSlotData { number: args.slot, name: args.name, @@ -590,68 +523,6 @@ pub fn otp_set(ctx: &mut ExecCtx<'_>, args: OtpSetArgs) -> Result<()> { ) } -/// Clear an OTP slot. -fn otp_clear(ctx: &mut ExecCtx<'_>, args: OtpClearArgs) -> Result<()> { - commands::otp_clear(ctx, args.slot, args.algorithm) -} - -/// Print the status of the OTP slots. -fn otp_status(ctx: &mut ExecCtx<'_>, args: OtpStatusArgs) -> Result<()> { - commands::otp_status(ctx, args.all) -} - -/// Execute a PIN subcommand. -fn pin(ctx: &mut ExecCtx<'_>, args: PinArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -/// Clear the PIN as cached by various other commands. -fn pin_clear(ctx: &mut ExecCtx<'_>, _args: PinClearArgs) -> Result<()> { - commands::pin_clear(ctx) -} - -/// Change a PIN. -fn pin_set(ctx: &mut ExecCtx<'_>, args: PinSetArgs) -> Result<()> { - commands::pin_set(ctx, args.pintype) -} - -/// Unblock and reset the user PIN. -fn pin_unblock(ctx: &mut ExecCtx<'_>, _args: PinUnblockArgs) -> Result<()> { - commands::pin_unblock(ctx) -} - -/// Execute a PWS subcommand. -fn pws(ctx: &mut ExecCtx<'_>, args: PwsArgs) -> Result<()> { - args.subcmd.execute(ctx) -} - -/// Access a slot of the password safe on the Nitrokey. -fn pws_get(ctx: &mut ExecCtx<'_>, args: PwsGetArgs) -> Result<()> { - commands::pws_get( - ctx, - args.slot, - args.name, - args.login, - args.password, - args.quiet, - ) -} - -/// Set a slot of the password safe on the Nitrokey. -fn pws_set(ctx: &mut ExecCtx<'_>, args: PwsSetArgs) -> Result<()> { - commands::pws_set(ctx, args.slot, &args.name, &args.login, &args.password) -} - -/// Clear a PWS slot. -fn pws_clear(ctx: &mut ExecCtx<'_>, args: PwsClearArgs) -> Result<()> { - commands::pws_clear(ctx, args.slot) -} - -/// Print the status of the PWS slots. -fn pws_status(ctx: &mut ExecCtx<'_>, args: PwsStatusArgs) -> Result<()> { - commands::pws_status(ctx, args.all) -} - /// Parse the command-line arguments and execute the selected command. pub(crate) fn handle_arguments(ctx: &mut RunCtx<'_>, args: Vec<String>) -> Result<()> { use structopt::StructOpt; |