From f49e61589e32217f97c94aa86d826f6b65170fba Mon Sep 17 00:00:00 2001 From: Robin Krahl Date: Mon, 28 Jan 2019 12:27:15 +0000 Subject: Require mutable reference if method changes device state Previously, all methods that access a Nitrokey device took a reference to the device as input. This method changes methods that change the device state to require a mutable reference instead. In most case, this is straightforward as the method writes data to the device (for example write_config or change_user_pin). But there are two edge cases: - Authenticating with a PIN changes the device state as it may decrease the PIN retry counter if the authentication fails. - Generating an HOTP code changes the device state as it increases the HOTP counter. --- tests/otp.rs | 93 ++++++++++++++++++++++++++++++------------------------------ 1 file changed, 46 insertions(+), 47 deletions(-) (limited to 'tests/otp.rs') diff --git a/tests/otp.rs b/tests/otp.rs index fc0e79e..28a8d7c 100644 --- a/tests/otp.rs +++ b/tests/otp.rs @@ -4,7 +4,7 @@ mod util; use std::fmt::Debug; -use std::ops::Deref; +use std::ops::DerefMut; use nitrokey::{ Admin, Authenticate, CommandError, Config, ConfigureOtp, Device, GenerateOtp, LibraryError, @@ -48,12 +48,12 @@ where .expect("Could not login as admin.") } -fn configure_hotp(admin: &ConfigureOtp, counter: u8) { +fn configure_hotp(admin: &mut ConfigureOtp, counter: u8) { let slot_data = OtpSlotData::new(1, "test-hotp", HOTP_SECRET, OtpMode::SixDigits); assert_ok!((), admin.write_hotp_slot(slot_data, counter.into())); } -fn check_hotp_codes(device: &GenerateOtp, offset: u8) { +fn check_hotp_codes(device: &mut GenerateOtp, offset: u8) { HOTP_CODES.iter().enumerate().for_each(|(i, code)| { if i >= offset as usize { assert_ok!(code.to_string(), device.get_hotp_code(1)); @@ -63,6 +63,7 @@ fn check_hotp_codes(device: &GenerateOtp, offset: u8) { #[test_device] fn set_time(device: DeviceWrapper) { + let mut device = device; assert_ok!((), device.set_time(1546385382, true)); assert_ok!((), device.set_time(1546385392, false)); assert_cmd_err!(CommandError::Timestamp, device.set_time(1546385292, false)); @@ -71,36 +72,36 @@ fn set_time(device: DeviceWrapper) { #[test_device] fn hotp_no_pin(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, false); assert_ok!((), admin.write_config(config)); - configure_hotp(&admin, 0); - check_hotp_codes(admin.deref(), 0); + configure_hotp(&mut admin, 0); + check_hotp_codes(admin.deref_mut(), 0); - configure_hotp(&admin, 5); - check_hotp_codes(admin.deref(), 5); + configure_hotp(&mut admin, 5); + check_hotp_codes(admin.deref_mut(), 5); - configure_hotp(&admin, 0); - check_hotp_codes(&admin.device(), 0); + configure_hotp(&mut admin, 0); + check_hotp_codes(&mut admin.device(), 0); } #[test_device] fn hotp_pin(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, true); assert_ok!((), admin.write_config(config)); - configure_hotp(&admin, 0); - let user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD)); - check_hotp_codes(&user, 0); + configure_hotp(&mut admin, 0); + let mut user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD)); + check_hotp_codes(&mut user, 0); assert_cmd_err!(CommandError::NotAuthorized, user.device().get_hotp_code(1)); } #[test_device] fn hotp_slot_name(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let slot_data = OtpSlotData::new(1, "test-hotp", HOTP_SECRET, OtpMode::SixDigits); assert_ok!((), admin.write_hotp_slot(slot_data, 0)); @@ -111,7 +112,7 @@ fn hotp_slot_name(device: DeviceWrapper) { #[test_device] fn hotp_error(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let slot_data = OtpSlotData::new(1, "", HOTP_SECRET, OtpMode::SixDigits); assert_cmd_err!(CommandError::NoName, admin.write_hotp_slot(slot_data, 0)); let slot_data = OtpSlotData::new(4, "test", HOTP_SECRET, OtpMode::SixDigits); @@ -130,7 +131,7 @@ fn hotp_error(device: DeviceWrapper) { #[test_device] fn hotp_erase(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, false); assert_ok!((), admin.write_config(config)); let slot_data = OtpSlotData::new(1, "test1", HOTP_SECRET, OtpMode::SixDigits); @@ -140,7 +141,7 @@ fn hotp_erase(device: DeviceWrapper) { assert_ok!((), admin.erase_hotp_slot(1)); - let device = admin.device(); + let mut device = admin.device(); let result = device.get_hotp_slot_name(1); assert_cmd_err!(CommandError::SlotNotProgrammed, result); let result = device.get_hotp_code(1); @@ -149,13 +150,13 @@ fn hotp_erase(device: DeviceWrapper) { assert_ok!("test2".to_string(), device.get_hotp_slot_name(2)); } -fn configure_totp(admin: &ConfigureOtp, factor: u64) { +fn configure_totp(admin: &mut ConfigureOtp, factor: u64) { let slot_data = OtpSlotData::new(1, "test-totp", TOTP_SECRET, OtpMode::EightDigits); let time_window = 30u64.checked_mul(factor).unwrap(); assert_ok!((), admin.write_totp_slot(slot_data, time_window as u16)); } -fn check_totp_codes(device: &GenerateOtp, factor: u64, timestamp_size: TotpTimestampSize) { +fn check_totp_codes(device: &mut GenerateOtp, factor: u64, timestamp_size: TotpTimestampSize) { for (base_time, codes) in TOTP_CODES { let time = base_time.checked_mul(factor).unwrap(); let is_u64 = time > u32::max_value() as u64; @@ -177,49 +178,47 @@ fn check_totp_codes(device: &GenerateOtp, factor: u64, timestamp_size: TotpTimes #[test_device] fn totp_no_pin(device: DeviceWrapper) { - // TODO: this test may fail due to bad timing --> find solution - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, false); assert_ok!((), admin.write_config(config)); - configure_totp(&admin, 1); - check_totp_codes(admin.deref(), 1, TotpTimestampSize::U32); + configure_totp(&mut admin, 1); + check_totp_codes(admin.deref_mut(), 1, TotpTimestampSize::U32); - configure_totp(&admin, 2); - check_totp_codes(admin.deref(), 2, TotpTimestampSize::U32); + configure_totp(&mut admin, 2); + check_totp_codes(admin.deref_mut(), 2, TotpTimestampSize::U32); - configure_totp(&admin, 1); - check_totp_codes(&admin.device(), 1, TotpTimestampSize::U32); + configure_totp(&mut admin, 1); + check_totp_codes(&mut admin.device(), 1, TotpTimestampSize::U32); } #[test_device] // Nitrokey Storage does only support timestamps that fit in a 32-bit // unsigned integer, so don't test with it. fn totp_no_pin_64(device: Pro) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, false); assert_ok!((), admin.write_config(config)); - configure_totp(&admin, 1); - check_totp_codes(admin.deref(), 1, TotpTimestampSize::U64); + configure_totp(&mut admin, 1); + check_totp_codes(admin.deref_mut(), 1, TotpTimestampSize::U64); - configure_totp(&admin, 2); - check_totp_codes(admin.deref(), 2, TotpTimestampSize::U64); + configure_totp(&mut admin, 2); + check_totp_codes(admin.deref_mut(), 2, TotpTimestampSize::U64); - configure_totp(&admin, 1); - check_totp_codes(&admin.device(), 1, TotpTimestampSize::U64); + configure_totp(&mut admin, 1); + check_totp_codes(&mut admin.device(), 1, TotpTimestampSize::U64); } #[test_device] fn totp_pin(device: DeviceWrapper) { - // TODO: this test may fail due to bad timing --> find solution - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, true); assert_ok!((), admin.write_config(config)); - configure_totp(&admin, 1); - let user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD)); - check_totp_codes(&user, 1, TotpTimestampSize::U32); + configure_totp(&mut admin, 1); + let mut user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD)); + check_totp_codes(&mut user, 1, TotpTimestampSize::U32); assert_cmd_err!(CommandError::NotAuthorized, user.device().get_totp_code(1)); } @@ -227,20 +226,20 @@ fn totp_pin(device: DeviceWrapper) { #[test_device] // See comment for totp_no_pin_64. fn totp_pin_64(device: Pro) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, true); assert_ok!((), admin.write_config(config)); - configure_totp(&admin, 1); - let user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD)); - check_totp_codes(&user, 1, TotpTimestampSize::U64); + configure_totp(&mut admin, 1); + let mut user = unwrap_ok!(admin.device().authenticate_user(USER_PASSWORD)); + check_totp_codes(&mut user, 1, TotpTimestampSize::U64); assert_cmd_err!(CommandError::NotAuthorized, user.device().get_totp_code(1)); } #[test_device] fn totp_slot_name(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let slot_data = OtpSlotData::new(1, "test-totp", TOTP_SECRET, OtpMode::EightDigits); assert_ok!((), admin.write_totp_slot(slot_data, 0)); @@ -253,7 +252,7 @@ fn totp_slot_name(device: DeviceWrapper) { #[test_device] fn totp_error(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let slot_data = OtpSlotData::new(1, "", TOTP_SECRET, OtpMode::SixDigits); assert_cmd_err!(CommandError::NoName, admin.write_totp_slot(slot_data, 0)); let slot_data = OtpSlotData::new(20, "test", TOTP_SECRET, OtpMode::SixDigits); @@ -272,7 +271,7 @@ fn totp_error(device: DeviceWrapper) { #[test_device] fn totp_erase(device: DeviceWrapper) { - let admin = make_admin_test_device(device); + let mut admin = make_admin_test_device(device); let config = Config::new(None, None, None, false); assert_ok!((), admin.write_config(config)); let slot_data = OtpSlotData::new(1, "test1", TOTP_SECRET, OtpMode::SixDigits); -- cgit v1.2.1