From cb39828ecd7ea5d2eac3076ad3dd1b6ef05e10d3 Mon Sep 17 00:00:00 2001 From: Daniel Mueller Date: Sun, 26 Mar 2017 17:07:34 -0700 Subject: Import subrepo libc/:libc at 05a2d197356ef253dfd985166576619ac9b6947f --- libc/ci/README.md | 203 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 libc/ci/README.md (limited to 'libc/ci/README.md') diff --git a/libc/ci/README.md b/libc/ci/README.md new file mode 100644 index 0000000..13c7c8d --- /dev/null +++ b/libc/ci/README.md @@ -0,0 +1,203 @@ +The goal of the libc crate is to have CI running everywhere to have the +strongest guarantees about the definitions that this library contains, and as a +result the CI is pretty complicated and also pretty large! Hopefully this can +serve as a guide through the sea of scripts in this directory and elsewhere in +this project. + +# Files + +First up, let's talk about the files in this directory: + +* `run-travis.sh` - a shell script run by all Travis builders, this is + responsible for setting up the rest of the environment such as installing new + packages, downloading Rust target libraries, etc. + +* `run.sh` - the actual script which runs tests for a particular architecture. + Called from the `run-travis.sh` script this will run all tests for the target + specified. + +* `cargo-config` - Cargo configuration of linkers to use copied into place by + the `run-travis.sh` script before builds are run. + +* `dox.sh` - script called from `run-travis.sh` on only the linux 64-bit nightly + Travis bots to build documentation for this crate. + +* `landing-page-*.html` - used by `dox.sh` to generate a landing page for all + architectures' documentation. + +* `run-qemu.sh` - see discussion about QEMU below + +* `mips`, `rumprun` - instructions to build the docker image for each respective + CI target + +# CI Systems + +Currently this repository leverages a combination of Travis CI and AppVeyor for +running tests. The triples tested are: + +* AppVeyor + * `{i686,x86_64}-pc-windows-{msvc,gnu}` +* Travis + * `{i686,x86_64,mips,aarch64}-unknown-linux-gnu` + * `x86_64-unknown-linux-musl` + * `arm-unknown-linux-gnueabihf` + * `arm-linux-androideabi` + * `{i686,x86_64}-apple-{darwin,ios}` + * `x86_64-rumprun-netbsd` + * `x86_64-unknown-freebsd` + * `x86_64-unknown-openbsd` + +The Windows triples are all pretty standard, they just set up their environment +then run tests, no need for downloading any extra target libs (we just download +the right installer). The Intel Linux/OSX builds are similar in that we just +download the right target libs and run tests. Note that the Intel Linux/OSX +builds are run on stable/beta/nightly, but are the only ones that do so. + +The remaining architectures look like: + +* Android runs in a [docker image][android-docker] with an emulator, the NDK, + and the SDK already set up. The entire build happens within the docker image. +* The MIPS, ARM, and AArch64 builds all use the QEMU userspace emulator to run + the generated binary to actually verify the tests pass. +* The MUSL build just has to download a MUSL compiler and target libraries and + then otherwise runs tests normally. +* iOS builds need an extra linker flag currently, but beyond that they're built + as standard as everything else. +* The rumprun target builds an entire kernel from the test suite and then runs + it inside QEMU using the serial console to test whether it succeeded or + failed. +* The BSD builds, currently OpenBSD and FreeBSD, use QEMU to boot up a system + and compile/run tests. More information on that below. + +[android-docker]: https://github.com/rust-lang/rust-buildbot/blob/master/slaves/android/Dockerfile + +## QEMU + +Lots of the architectures tested here use QEMU in the tests, so it's worth going +over all the crazy capabilities QEMU has and the various flavors in which we use +it! + +First up, QEMU has userspace emulation where it doesn't boot a full kernel, it +just runs a binary from another architecture (using the `qemu-` wrappers). +We provide it the runtime path for the dynamically loaded system libraries, +however. This strategy is used for all Linux architectures that aren't intel. +Note that one downside of this QEMU system is that threads are barely +implemented, so we're careful to not spawn many threads. + +For the rumprun target the only output is a kernel image, so we just use that +plus the `rumpbake` command to create a full kernel image which is then run from +within QEMU. + +Finally, the fun part, the BSDs. Quite a few hoops are jumped through to get CI +working for these platforms, but the gist of it looks like: + +* Cross compiling from Linux to any of the BSDs seems to be quite non-standard. + We may be able to get it working but it might be difficult at that point to + ensure that the libc definitions align with what you'd get on the BSD itself. + As a result, we try to do compiles within the BSD distro. +* On Travis we can't run a VM-in-a-VM, so we resort to userspace emulation + (QEMU). +* Unfortunately on Travis we also can't use KVM, so the emulation is super slow. + +With all that in mind, the way BSD is tested looks like: + +1. Download a pre-prepared image for the OS being tested. +2. Generate the tests for the OS being tested. This involves running the `ctest` + library over libc to generate a Rust file and a C file which will then be + compiled into the final test. +3. Generate a disk image which will later be mounted by the OS being tested. + This image is mostly just the libc directory, but some modifications are made + to compile the generated files from step 2. +4. The kernel is booted in QEMU, and it is configured to detect the libc-test + image being available, run the test script, and then shut down afterwards. +5. Look for whether the tests passed in the serial console output of the kernel. + +There's some pretty specific instructions for setting up each image (detailed +below), but the main gist of this is that we must avoid a vanilla `cargo run` +inside of the `libc-test` directory (which is what it's intended for) because +that would compile `syntex_syntax`, a large library, with userspace emulation. +This invariably times out on Travis, so we can't do that. + +Once all those hoops are jumped through, however, we can be happy that we're +testing almost everything! + +Below are some details of how to set up the initial OS images which are +downloaded. Each image must be enabled have input/output over the serial +console, log in automatically at the serial console, detect if a second drive in +QEMU is available, and if so mount it, run a script (it'll specifically be +`run-qemu.sh` in this folder which is copied into the generated image talked +about above), and then shut down. + +### QEMU setup - FreeBSD + +1. Download CD installer (most minimal is fine) +2. `qemu-img create -f qcow2 foo.qcow2 2G` +3. `qemu -cdrom foo.iso -drive if=virtio,file=foo.qcow2 -net nic,model=virtio -net user` +4. run installer +5. `echo 'console="comconsole"' >> /boot/loader.conf` +6. `echo 'autoboot_delay="0"' >> /boot/loader.conf` +7. look at /etc/ttys, see what getty argument is for ttyu0 +8. edit /etc/gettytab, look for ttyu0 argument, prepend `:al=root` to line + beneath + +(note that the current image has a `freebsd` user, but this isn't really +necessary) + +Once that's done, arrange for this script to run at login: + +``` +#!/bin/sh + +sudo kldload ext2fs +[ -e /dev/vtbd1 ] || exit 0 +sudo mount -t ext2fs /dev/vtbd1 /mnt +sh /mnt/run.sh /mnt +sudo poweroff +``` + +Helpful links + +* https://en.wikibooks.org/wiki/QEMU/Images +* https://blog.nekoconeko.nl/blog/2015/06/04/creating-an-openstack-freebsd-image.html +* https://www.freebsd.org/doc/handbook/serialconsole-setup.html + + +### QEMU setup - OpenBSD + +1. Download CD installer +2. `qemu-img create -f qcow2 foo.qcow2 2G` +3. `qemu -cdrom foo.iso -drive if=virtio,file=foo.qcow2 -net nic,model=virtio -net user` +4. run installer +5. `echo 'set tty com0' >> /etc/boot.conf` +6. `echo 'boot' >> /etc/boot.conf` +7. Modify /etc/ttys, change the `tty00` at the end from 'unknown off' to + 'vt220 on secure' +8. Modify same line in /etc/ttys to have `"/root/foo.sh"` as the shell +9. Add this script to `/root/foo.sh` + +``` +#!/bin/sh +exec 1>/dev/tty00 +exec 2>&1 + +if mount -t ext2fs /dev/sd1c /mnt; then + sh /mnt/run.sh /mnt + shutdown -ph now +fi + +# limited shell... +exec /bin/sh < /dev/tty00 +``` + +10. `chmod +x /root/foo.sh` + +Helpful links: + +* https://en.wikibooks.org/wiki/QEMU/Images +* http://www.openbsd.org/faq/faq7.html#SerCon + +# Questions? + +Hopefully that's at least somewhat of an introduction to everything going on +here, and feel free to ping @alexcrichton with questions! + -- cgit v1.2.1