#ifndef LIBNITROKEY_NK_C_API_H
#define LIBNITROKEY_NK_C_API_H

#include <stdint.h>

#ifdef _MSC_VER
#define NK_C_API __declspec(dllexport)
#else
#define NK_C_API 
#endif

#ifdef __cplusplus
extern "C" {
#endif
	/**
	 * Set debug level of messages written on stderr
	 * @param state state=True - most messages, state=False - only errors level
	 */
	NK_C_API void NK_set_debug(bool state);

	/**
	 * Set debug level of messages written on stderr
	 * @param level (int) 0-lowest verbosity, 5-highest verbosity
	 */
  NK_C_API void NK_set_debug_level(const int level);

	/**
	 * Connect to device of given model. Currently library can be connected only to one device at once.
	 * @param device_model char 'S': Nitrokey Storage, 'P': Nitrokey Pro
	 * @return 1 if connected, 0 if wrong model or cannot connect
	 */
	NK_C_API int NK_login(const char *device_model);

	/**
	 * Connect to first available device, starting checking from Pro 1st to Storage 2nd.
	 * @return 1 if connected, 0 if wrong model or cannot connect
	 */
	NK_C_API int NK_login_auto();

	/**
	 * Disconnect from the device.
	 * @return command processing error code
	 */
	NK_C_API int NK_logout();

	/**
	 * Return the debug status string. Debug purposes.
	 * @return command processing error code
	 */
	NK_C_API const char * NK_status();

	/**
	 * Return the device's serial number string in hex.
	 * @return string device's serial number in hex
	 */
	NK_C_API const char * NK_device_serial_number();

	/**
	 * Get last command processing status. Useful for commands which returns the results of their own and could not return
	 * an error code.
	 * @return previous command processing error code
	 */
	NK_C_API uint8_t NK_get_last_command_status();

	/**
	 * Lock device - cancel any user device unlocking.
	 * @return command processing error code
	 */
	NK_C_API int NK_lock_device();

	/**
	 * Authenticates the user on USER privilages with user_password and sets user's temporary password on device to user_temporary_password.
	 * @param user_password char[25](Pro) current user password
	 * @param user_temporary_password char[25](Pro) user temporary password to be set on device for further communication (authentication command)
	 * @return command processing error code
	 */
	NK_C_API int NK_user_authenticate(const char* user_password, const char* user_temporary_password);

	/**
	 * Authenticates the user on ADMIN privilages with admin_password and sets user's temporary password on device to admin_temporary_password.
	 * @param admin_password char[25](Pro) current administrator PIN
	 * @param admin_temporary_password char[25](Pro) admin temporary password to be set on device for further communication (authentication command)
	 * @return command processing error code
	 */
	NK_C_API int NK_first_authenticate(const char* admin_password, const char* admin_temporary_password);

	/**
	 * Execute a factory reset.
	 * @param admin_password char[20](Pro) current administrator PIN
	 * @return command processing error code
	 */
	NK_C_API int NK_factory_reset(const char* admin_password);

	/**
	 * Generates AES key on the device
	 * @param admin_password char[20](Pro) current administrator PIN
	 * @return command processing error code
	 */
	NK_C_API int NK_build_aes_key(const char* admin_password);

	/**
	 * Unlock user PIN locked after 3 incorrect codes tries.
	 * @param admin_password char[20](Pro) current administrator PIN
	 * @return command processing error code
	 */
	NK_C_API int NK_unlock_user_password(const char *admin_password, const char *new_user_password);

	/**
	 * Write general config to the device
	 * @param numlock set value in range [0-1] to send HOTP code from slot 'numlock' after double pressing numlock
	 * or outside the range to disable this function
	 * @param capslock similar to numlock but with capslock
	 * @param scrolllock similar to numlock but with scrolllock
	 * @param enable_user_password set True to enable OTP PIN protection (request PIN each OTP code request)
	 * @param delete_user_password set True to disable OTP PIN protection (request PIN each OTP code request)
	 * @param admin_temporary_password current admin temporary password
	 * @return command processing error code
	 */
	NK_C_API int NK_write_config(uint8_t numlock, uint8_t capslock, uint8_t scrolllock,
		bool enable_user_password, bool delete_user_password, const char *admin_temporary_password);

	/**
	 * Get currently set config - status of function Numlock/Capslock/Scrollock OTP sending and is enabled PIN protected OTP
	 * @see NK_write_config
	 * @return  uint8_t general_config[5]:
	 *            uint8_t numlock;
				  uint8_t capslock;
				  uint8_t scrolllock;
				  uint8_t enable_user_password;
				  uint8_t delete_user_password;

	 */
	NK_C_API uint8_t* NK_read_config();

	//OTP

	/**
	 * Get name of given TOTP slot
	 * @param slot_number TOTP slot number, slot_number<15
	 * @return char[20](Pro) the name of the slot
	 */
	NK_C_API const char * NK_get_totp_slot_name(uint8_t slot_number);

	/**
	 *
	 * @param slot_number HOTP slot number, slot_number<3
	 * @return char[20](Pro) the name of the slot
	 */
	NK_C_API const char * NK_get_hotp_slot_name(uint8_t slot_number);

	/**
	 * Erase HOTP slot data from the device
	 * @param slot_number HOTP slot number, slot_number<3
	 * @param temporary_password admin temporary password
	 * @return command processing error code
	 */
	NK_C_API int NK_erase_hotp_slot(uint8_t slot_number, const char *temporary_password);

	/**
	 * Erase TOTP slot data from the device
	 * @param slot_number TOTP slot number, slot_number<15
	 * @param temporary_password admin temporary password
	 * @return command processing error code
	 */
	NK_C_API int NK_erase_totp_slot(uint8_t slot_number, const char *temporary_password);

	/**
	 * Write HOTP slot data to the device
	 * @param slot_number HOTP slot number, slot_number<3
	 * @param slot_name char[15](Pro) desired slot name
	 * @param secret char[20](Pro) 160-bit secret
	 * @param hotp_counter uint32_t starting value of HOTP counter
	 * @param use_8_digits should returned codes be 6 (false) or 8 digits (true)
	 * @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock
	 * @param use_tokenID @see token_ID
	 * @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section
	 * @param temporary_password char[25](Pro) admin temporary password
	 * @return command processing error code
	 */
	NK_C_API int NK_write_hotp_slot(uint8_t slot_number, const char *slot_name, const char *secret, uint64_t hotp_counter,
		bool use_8_digits, bool use_enter, bool use_tokenID, const char *token_ID,
		const char *temporary_password);

	/**
	 * Write TOTP slot data to the device
	 * @param slot_number TOTP slot number, slot_number<15
	 * @param slot_name char[15](Pro) desired slot name
	 * @param secret char[20](Pro) 160-bit secret
	 * @param time_window uint16_t time window for this TOTP
	 * @param use_8_digits should returned codes be 6 (false) or 8 digits (true)
	 * @param use_enter press ENTER key after sending OTP code using double-pressed scroll/num/capslock
	 * @param use_tokenID @see token_ID
	 * @param token_ID @see https://openauthentication.org/token-specs/, 'Class A' section
	 * @param temporary_password char[20](Pro) admin temporary password
	 * @return command processing error code
	 */
	NK_C_API int NK_write_totp_slot(uint8_t slot_number, const char *slot_name, const char *secret, uint16_t time_window,
		bool use_8_digits, bool use_enter, bool use_tokenID, const char *token_ID,
		const char *temporary_password);

	/**
	 * Get HOTP code from the device
	 * @param slot_number HOTP slot number, slot_number<3
	 * @return HOTP code
	 */
	NK_C_API const char * NK_get_hotp_code(uint8_t slot_number);

	/**
	 * Get HOTP code from the device (PIN protected)
	 * @param slot_number HOTP slot number, slot_number<3
	 * @param user_temporary_password char[25](Pro) user temporary password if PIN protected OTP codes are enabled,
	 * otherwise should be set to empty string - ''
	 * @return HOTP code
	 */
	NK_C_API const char * NK_get_hotp_code_PIN(uint8_t slot_number, const char *user_temporary_password);

	/**
	 * Get TOTP code from the device
	 * @param slot_number TOTP slot number, slot_number<15
	 * @param challenge TOTP challenge
	 * @param last_totp_time last time
	 * @param last_interval last interval
	 * @return TOTP code
	 */
	NK_C_API const char * NK_get_totp_code(uint8_t slot_number, uint64_t challenge, uint64_t last_totp_time,
		uint8_t last_interval);

	/**
	 * Get TOTP code from the device (PIN protected)
	 * @param slot_number TOTP slot number, slot_number<15
	 * @param challenge TOTP challenge
	 * @param last_totp_time last time
	 * @param last_interval last interval
	 * @param user_temporary_password char[25](Pro) user temporary password if PIN protected OTP codes are enabled,
	 * otherwise should be set to empty string - ''
	 * @return TOTP code
	 */
	NK_C_API const char * NK_get_totp_code_PIN(uint8_t slot_number, uint64_t challenge,
		uint64_t last_totp_time, uint8_t last_interval,
		const char *user_temporary_password);

	/**
	 * Set time on the device (for TOTP requests)
	 * @param time seconds in unix epoch (from 01.01.1970)
	 * @return command processing error code
	 */
	NK_C_API int NK_totp_set_time(uint64_t time);

	NK_C_API int NK_totp_get_time();
	//passwords
	/**
	 * Change administrator PIN
	 * @param current_PIN char[25](Pro) current PIN
	 * @param new_PIN char[25](Pro) new PIN
	 * @return command processing error code
	 */
	NK_C_API int NK_change_admin_PIN(const char *current_PIN, const char *new_PIN);

	/**
	 * Change user PIN
	 * @param current_PIN char[25](Pro) current PIN
	 * @param new_PIN char[25](Pro) new PIN
	 * @return command processing error code
	*/
	NK_C_API int NK_change_user_PIN(const char *current_PIN, const char *new_PIN);


	/**
	 * Get retry count of user PIN
	 * @return user PIN retry count
	 */
	NK_C_API uint8_t NK_get_user_retry_count();

	/**
	 * Get retry count of admin PIN
	 * @return admin PIN retry count
	 */
	NK_C_API uint8_t NK_get_admin_retry_count();
	//password safe

	/**
	 * Enable password safe access
	 * @param user_pin char[30](Pro) current user PIN
	 * @return command processing error code
	 */
	NK_C_API int NK_enable_password_safe(const char *user_pin);

	/**
	 * Get password safe slots' status
	 * @return uint8_t[16] slot statuses - each byte represents one slot with 0 (not programmed) and 1 (programmed)
	 */
	NK_C_API uint8_t * NK_get_password_safe_slot_status();

	/**
	 * Get password safe slot name
	 * @param slot_number password safe slot number, slot_number<16
	 * @return slot name
	 */
	NK_C_API const char *NK_get_password_safe_slot_name(uint8_t slot_number);

	/**
	 * Get password safe slot login
	 * @param slot_number password safe slot number, slot_number<16
	 * @return login from the PWS slot
	 */
	NK_C_API const char *NK_get_password_safe_slot_login(uint8_t slot_number);

	/**
	 * Get the password safe slot password
	 * @param slot_number password safe slot number, slot_number<16
	 * @return password from the PWS slot
	 */
	NK_C_API const char *NK_get_password_safe_slot_password(uint8_t slot_number);

	/**
	 * Write password safe data to the slot
	 * @param slot_number password safe slot number, slot_number<16
	 * @param slot_name char[11](Pro) name of the slot
	 * @param slot_login char[32](Pro) login string
	 * @param slot_password char[20](Pro) password string
	 * @return command processing error code
	 */
	NK_C_API int NK_write_password_safe_slot(uint8_t slot_number, const char *slot_name,
		const char *slot_login, const char *slot_password);

	/**
	 * Erase the password safe slot from the device
	 * @param slot_number password safe slot number, slot_number<16
	 * @return command processing error code
	 */
	NK_C_API int NK_erase_password_safe_slot(uint8_t slot_number);

	/**
	 * Check whether AES is supported by the device
	 * @return 0 for no and 1 for yes
	 */
	NK_C_API int NK_is_AES_supported(const char *user_password);

	/**
	 * Get device's major firmware version
	 * @return 7,8 for Pro and major for Storage
	 */
	NK_C_API int NK_get_major_firmware_version();



	/**
	 * This command is typically run to initiate
	 * communication with the device (altough not required).
	 * It sets time on device and returns its current status
	 * - a combination of set_time and get_status_storage commands
	 * Storage only
	 * @param seconds_from_epoch date and time expressed in seconds
	 */
	NK_C_API int NK_send_startup(uint64_t seconds_from_epoch);

	/**
	 * Unlock encrypted volume.
	 * Storage only
	 * @param user_pin user pin 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_unlock_encrypted_volume(const char* user_pin);

	/**
	 * Locks encrypted volume
	 * @return command processing error code
	 */
	NK_C_API int NK_lock_encrypted_volume();

	/**
	 * Unlock hidden volume and lock encrypted volume.
	 * Requires encrypted volume to be unlocked.
	 * Storage only
	 * @param hidden_volume_password 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_unlock_hidden_volume(const char* hidden_volume_password);

	/**
	 * Locks hidden volume
	 * @return command processing error code
	 */
	NK_C_API int NK_lock_hidden_volume();

	/**
	 * Create hidden volume.
	 * Requires encrypted volume to be unlocked.
	 * Storage only
	 * @param slot_nr slot number in range 0-3
	 * @param start_percent volume begin expressed in percent of total available storage, int in range 0-99
	 * @param end_percent volume end expressed in percent of total available storage, int in range 1-100
	 * @param hidden_volume_password 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_create_hidden_volume(uint8_t slot_nr, uint8_t start_percent, uint8_t end_percent,
		const char *hidden_volume_password);

	/**
	 * Make unencrypted volume read-only.
	 * Device hides unencrypted volume for a second therefore make sure
	 * buffers are flushed before running.
	 * Storage only
	 * @param user_pin 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_set_unencrypted_read_only(const char* user_pin);

	/**
	 * Make unencrypted volume read-write.
	 * Device hides unencrypted volume for a second therefore make sure
	 * buffers are flushed before running.
	 * Storage only
	 * @param user_pin 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_set_unencrypted_read_write(const char* user_pin);

	/**
	 * Exports device's firmware to unencrypted volume.
	 * Storage only
	 * @param admin_pin 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_export_firmware(const char* admin_pin);

	/**
	 * Clear new SD card notification. It is set after factory reset.
	 * Storage only
	 * @param admin_pin 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_clear_new_sd_card_warning(const char* admin_pin);

	/**
	 * Fill SD card with random data.
	 * Should be done on first stick initialization after creating keys.
	 * Storage only
	 * @param admin_pin 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_fill_SD_card_with_random_data(const char* admin_pin);

	/**
	 * Change update password.
	 * Update password is used for entering update mode, where firmware
	 * could be uploaded using dfu-programmer or other means.
	 * Storage only
	 * @param current_update_password 20 characters
	 * @param new_update_password 20 characters
	 * @return command processing error code
	 */
	NK_C_API int NK_change_update_password(const char* current_update_password,
		const char* new_update_password);

	/**
	 * Get Storage stick status as string.
	 * Storage only
	 * @return string with devices attributes
	 */
	NK_C_API const char* NK_get_status_storage_as_string();

	/**
	 * Get SD card usage attributes as string.
	 * Usable during hidden volumes creation.
	 * Storage only
	 * @return string with SD card usage attributes
	 */
	NK_C_API const char* NK_get_SD_usage_data_as_string();

	/**
	 * Get progress value of current long operation.
	 * Storage only
	 * @return int in range 0-100 or -1 if device is not busy
	 */
	NK_C_API int NK_get_progress_bar_value();

	/**
	 * Return the version of the library.
	 * If a git tag is available, return it else return the git version.
	 * This value is defined at the compilation time.
	 * @return the version of the library
	 */
	NK_C_API const char * NK_version();

#ifdef __cplusplus
}
#endif

#endif //LIBNITROKEY_NK_C_API_H